Colorado county well guide

Well Water in Broomfield County, CO: Testing, Contractors and Rules

0%of households on a private well
Share on wells, county vs state
Broomfield County0%
Colorado average11%
0licensed contractors serve the county
6 mito the nearest certified lab, Murray-Brown Laboratories, LLC.
Nostatewide test required when a home is sold

Wells are the exception in Broomfield County: about 0 households, under 1% of the county, are on a private well. Being in the minority means less local help, so this page gathers what applies.

Local rules for wells in Broomfield County

Every well in Broomfield County needs a permit from the Colorado Division of Water Resources before drilling, and only licensed contractors may drill or set the pump. Water quality is not regulated for private wells, so testing is entirely the owner’s call.

At a glance

Water test for a new wellNot required statewide

A DWR well permit is required before drilling and contractors must notify DWR before construction, but no water quality test is required by the state.

Water test when a home is soldNot required statewide

No statewide requirement. Lenders often require a test; some counties recommend one at transfer.

What the state recommends

CDPHE recommends yearly testing for coliform bacteria and nitrate, and a broader panel (metals, uranium, radon, fluoride, hardness) every few years. Colorado groundwater commonly has naturally occurring uranium, radon and fluoride.

Free or low-cost testingAvailable

Colorado offers a free PFAS testing program for private wells. Several county health departments (Weld, El Paso, La Plata, Mesa, Pueblo, Routt, Gilpin, Northeast Colorado) run certified labs that accept homeowner samples.

Getting your water tested near Broomfield County

The nearest certified lab is Colorado Analytical Laboratory – Commerce City in Commerce City, about 8 miles from the county center, and it accepts samples from homeowners. There are 14 more within 40 miles, listed below with what each tests for.

Licensed well contractors serving Broomfield County

No licensed contractor lists Broomfield County as a home base or service area yet. The finder below searches the whole state; most drillers travel several counties for a job.

Well depth and water chemistry

Well depth and water chemistry in Broomfield County follow the rock underneath it. Depth varies across the county; the state well record search shows logs for nearby wells.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Uranium
  • Radon
  • Fluoride
  • Nitrate
  • Hardness
  • Coliform bacteria
  • Arsenic (some basins)

Neighboring counties: Adams County, Boulder County, Jefferson County, Denver County.

What well work costs in Broomfield County

Basic bacteria and nitrate test$25 to $75lab fee, homeowner sample
Full panel lab test$150 to $400metals, VOCs, radiologicals
Well inspection$250 to $550flow, pressure, visual, water test
Submersible pump replacement$1,200 to $4,500parts and labor
Pressure tank replacement$400 to $1,200installed
Whole-house treatment system$800 to $6,000softener, iron filter, UV, RO
New well drilled$5,500 to $25,000about $25 to $65 per foot
Shock chlorination$80 to $300or about $20 as a DIY job

National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.

Questions Broomfield County well owners ask

How many homes in Broomfield County are on a well?

About 0, or 0% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.

Where is the closest certified lab to Broomfield County?

Colorado Analytical Laboratory – Commerce City in Commerce City, about 8 miles away. It accepts homeowner samples.

Do I need a permit to drill a well in Broomfield County?

Yes. A permit from the Colorado Division of Water Resources is required before any drilling.

What does a well test cost near Broomfield County?

A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. County health department labs charge less than commercial labs, and PFAS testing is free through the state.