Verified license

Arthur Guzman

TXPump installation

Call (806) 938-2015
License status
Active
checked September 29, 2026
License number
54782
Texas record
Services
2
Pump Installation and more

About Arthur Guzman

Arthur Guzman is a pump installation contractor based in TX. The Texas licensing program lists license 54782 as active, and we last checked the record on September 29, 2026.

The state record covers pump installation and pump repair.

This profile is built from public state license records checked on September 29, 2026. Well Water Insider does not rate or endorse contractors. Own this business? Claim the profile to add photos, hours and a description.

License record

Verified against state records
License number
54782
License type
Pump installation
Status
Active
Expires
March 25, 2027
Last verified
September 29, 2026

Check this license yourself on the official Texas lookup.

What the state record says

Licensed by the Texas Department of Licensing and Regulation (TDLR) as a pump installer (pump endorsements: single-phase pumps, three-phase pumps, line-shaft turbine pumps). License 54782, expires 2027-03-25. No well reports filed with the Texas Water Development Board since 2016 under this license (pump-only work and repairs are not reported).

Services

What the Texas record says Arthur Guzman is licensed or registered to do.

Pump Installation

Setting a new submersible or jet pump with the pressure tank, switch and controls.

Pump Repair

Tracking down low pressure, short cycling or no water, then repairing or replacing parts of the pump system.

Typical costs for these services

National ranges to help you read a quote. They are not prices from Arthur Guzman; ask for a written estimate.

Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed

National 2026 ranges. Sources, checked September 2026: HomeGuide cost guides, Angi.

Before you hire

  1. 1

    Confirm the license

    Look up license 54782 on the Texas state lookup and make sure it is active for the work you need. Open the Texas lookup.

  2. 2

    Get a written estimate

    Ask for the scope, parts, depth or pump size, permit fees and warranty in writing. Compare two or three quotes for big jobs.

  3. 3

    Ask about permits and the well log

    New wells and many repairs are reported to the state. Ask who files the paperwork and for a copy of the well log.

  4. 4

    Test the water after the work

    Any work on a well can disturb bacteria. Test for coliform bacteria once the job is done.

Questions about Arthur Guzman

Is Arthur Guzman licensed?

Yes. The Texas record shows license 54782 (pump installation) with the status "active", last checked on September 29, 2026. You can confirm it on the state lookup.

What services does Arthur Guzman offer?

The state record lists pump installation and pump repair. Call to confirm they take on your type of job.

How do I contact Arthur Guzman?

Call (806) 938-2015. The address on the state record is TX.

Other licensed contractors near