Eurofins Greenville
NC certified
- Arsenic
- Coliform Bacteria
- Hardness
- Iron and Manganese
- Nitrate / Nitrite
- Pesticides
- Uranium
- Volatile Organic Compounds
North Carolina county well guide
Well Water in Wilson County, NC: Testing, Contractors and Rules
About 7,405 households in Wilson County, 23% of the county, rely on a private well. Nobody tests that water unless the owner does.
of households on a private well
Share on wells, county vs state
1licensed contractors serve the county
34 mito the nearest certified lab, Eurofins Greenville
Nostatewide test required when a home is sold
Wilson County has an estimated 7,405 households on private wells, 23% of the county. If you are one of them, testing, treatment and repairs are yours to arrange.
Local rules for wells in Wilson County
Wilson County Environmental Health issues well permits and, under North Carolina law, every new well must be tested within 30 days of completion before it is used for drinking. The county office also collects samples for the State Laboratory for a set fee, which is usually the cheapest route for a routine test.
At a glance
Water test for a new wellRequired
Every newly constructed private well must be tested within 30 days of completion by the State Laboratory of Public Health or a certified lab before it is used for drinking water.
Water test when a home is soldNot required statewide
No statewide requirement at sale. Lenders (FHA, VA, USDA) usually require a test.
What the state recommends
Every year: total and fecal coliform bacteria plus a wellhead inspection. Every 2 years: heavy metals, nitrate and nitrite, lead and copper. Every 5 years: pesticides and volatile organic compounds. Retest after repairs, flooding, a change in water quality, or when an infant or pregnant person is in the home.
Free or low-cost testingAvailable
County health departments collect samples and send them to the State Laboratory of Public Health at set fees that vary by county (often $30 to $100 per panel).
Getting your water tested near Wilson County
1 certified lab within 40 miles serve Wilson County, starting with Eurofins Greenville in Oakmont Drive Greenville (about 33 miles from the county center). Each card below shows whether the lab takes homeowner samples and which tests it is certified for.
1 certified labs within 40 miles
Licensed well contractors serving Wilson County
1 licensed contractor serve Wilson County, including Boyette Well & Septic, Inc. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.
1 licensed contractors
Boyette Well & Septic, Inc.
Verified license
License 2505, 2506, 3093 Active
- Downhole Camera
- Geothermal
- Irrigation Wells
- Pump Installation
- Pump Repair
- Well Abandonment
- Well Drilling
- Well Repair
Well depth and water chemistry
What comes up with the water depends on the aquifer. A first full panel tells you which of them apply to your well.
Typical well depth
Varies by location. Check the state well record search for logs of nearby wells.
Contaminants to test for
- Lead
- Arsenic
- Iron
- Manganese
- Low pH (corrosive water)
- Coliform bacteria
- Radon
Neighboring counties: Nash County, Edgecombe County, Greene County, Wayne County.
What well work costs in Wilson County
Bacteria test (coliform and E. coli)$75published North Carolina lab fees
Nitrate test$75published North Carolina lab fees
Broad panel (metals and minerals)$175published North Carolina lab fees
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself
County health departments set their own fees: $75 per kit in Moore County; $175 first-timer package in Wake County, plus a $50 trip fee if staff collect. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Moore County fee schedule, Wake County well water testing, HomeGuide cost guides, Angi: cost to shock a well.
Questions Wilson County well owners ask
How many homes in Wilson County are on a well?
About 7,405, or 23% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.
Where is the closest certified lab to Wilson County?
Eurofins Greenville in Oakmont Drive Greenville, about 33 miles away. Call first to ask whether they accept homeowner samples.
Do I need a permit to drill a well in Wilson County?
Yes. County Environmental Health issues the permit, and the new well must be tested within 30 days of completion.
What does a well test cost near Wilson County?
A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. County-collected samples sent to the State Laboratory are often cheaper.