Verified license

J. M. Hudson Drilling Company, Inc.

Pantego, NC · Beaufort CountyWell drilling and pump installation

Call (252) 943-3204
License status
Active
checked September 29, 2026
License number
2399
North Carolina record
Services
8
Downhole Camera and more
Counties served
1
on the state record

About J. M. Hudson Drilling Company, Inc.

J. M. Hudson Drilling Company, Inc. is a well drilling and pump installation contractor based in Pantego, NC (Beaufort County). The North Carolina licensing program lists license 2399 as active, and we last checked the record on September 29, 2026.

The state record covers downhole camera, geothermal, irrigation wells, pump installation, pump repair, well abandonment, well drilling and well repair. It lists 1 county where the business works, including Beaufort County.

This profile is built from public state license records checked on September 29, 2026. Well Water Insider does not rate or endorse contractors. Own this business? Claim the profile to add photos, hours and a description.

License record

Verified against state records
License number
2399
License type
Well drilling and pump installation
Level / class
NC Level A
Status
Active
Last verified
September 29, 2026

Check this license yourself on the official North Carolina lookup.

What the state record says

License details

  • NC certified individuals: Roger Hudson (cert #2399, Level A, certified 7/6/1999).
  • Endorsements: Well Construction, Environmental, Geothermal, Irrigation Well, Well Abandonment or Repair, Pump Install/Repair, Down Hole Camera.
  • Map position is the county center until an address is verified.

Services

What the North Carolina record says J. M. Hudson Drilling Company, Inc. is licensed or registered to do.

Downhole Camera

Running a video camera down the casing to find cracks, sediment or a lost pump.

Geothermal

Drilling closed-loop boreholes for ground-source heat pumps.

Irrigation Wells

Drilling and equipping wells for lawn, garden or farm irrigation.

Pump Installation

Setting a new submersible or jet pump with the pressure tank, switch and controls.

Pump Repair

Tracking down low pressure, short cycling or no water, then repairing or replacing parts of the pump system.

Well Abandonment

Sealing an unused well to state standards so it cannot carry surface water down into the aquifer.

Well Drilling

Drilling a new private well, setting the casing and grouting it the way state rules require.

Well Repair

Fixing casings, caps, pitless adapters and other parts of an existing well.

Want to compare more than one quote?

Send one free request and hear back from up to 3 licensed well contractors near Pantego.

Service area

Based in Beaufort County, North Carolina. The state record lists 1 county.

Approximate location (Beaufort County)Counties on the state record

  • Beaufort County

Well water in Beaufort County

Useful context before you call a contractor here.

People on wells53%of residents in Beaufort County, about 25,400 people (USGS estimate, 2010)
Test at home saleNot requiredNo statewide rule in North Carolina.
Open the Beaufort County well guide

Typical costs for these services

National ranges to help you read a quote. They are not prices from J. M. Hudson Drilling Company, Inc.; ask for a written estimate.

Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself
National 2026 ranges. Sources, checked September 2026: HomeGuide cost guides and Angi.

Certified labs nearby

Test your water before and after any work on the well.

All labs near here

Before you hire

  1. 1

    Confirm the license

    Look up license 2399 on the North Carolina state lookup and make sure it is active for the work you need. Open the North Carolina lookup.

  2. 2

    Get a written estimate

    Ask for the scope, parts, depth or pump size, permit fees and warranty in writing. Compare two or three quotes for big jobs.

  3. 3

    Ask about permits and the well log

    New wells and many repairs are reported to the state. Ask who files the paperwork and for a copy of the well log.

  4. 4

    Test the water after the work

    Any work on a well can disturb bacteria. Test for coliform bacteria once the job is done.

Questions about J. M. Hudson Drilling Company, Inc.

Is J. M. Hudson Drilling Company, Inc. licensed?

Yes. The North Carolina record shows license 2399 (well drilling and pump installation) with the status "active", last checked on September 29, 2026. You can confirm it on the state lookup.

What services does J. M. Hudson Drilling Company, Inc. offer?

The state record lists downhole camera, geothermal, irrigation wells, pump installation, pump repair, well abandonment, well drilling and well repair. Call to confirm they take on your type of job.

What areas does J. M. Hudson Drilling Company, Inc. serve?

The business is based in Beaufort County (Pantego, NC). The state record lists 1 county, including Beaufort County.

How do I contact J. M. Hudson Drilling Company, Inc.?

Call (252) 943-3204. The address on the state record is Pantego, NC 27860.

Other licensed contractors near Pantego

Nutrien

Verified license

NC · Beaufort County

License 4535 Active

  • Downhole Camera
  • Pump Installation
  • Pump Repair
  • Well Abandonment
  • Well Repair

Free quotes

Get quotes from licensed local pros

Your request goes to Well Water Insider’s network of licensed well contractors near you, not to J. M. Hudson Drilling Company, Inc. To contact J. M. Hudson Drilling Company, Inc directly, call (252) 943-3204.

Free, with no obligation. See our Privacy Policy and Terms.