Private well guide

Well Water in Illinois: Testing, Rules, Labs and Licensed Contractors

About 1,121,000 people in Illinois get their water from a private well, by the U.S. Geological Survey's estimate. Here is what the state requires, where to get it tested, and who is licensed to work on it.

277Licensed contractorschecked against state records
31Certified labsfrom the state certified list
102Counties covered
1,121,000People on private wells9% of residents (USGS, 2010)

The short version: Illinois requires a permit and a health department inspection before a private well is used, and most county health departments collect a bacteria sample at the final inspection. After that, testing is up to you, and the arsenic, radium and iron in Illinois aquifers will never show up on a yearly bacteria test. About 1.1 million Illinoisans, 9% of residents, drink from a private well (USGS estimate, 2010).

Illinois at a glance
Permit to drill a home well Yes, from the county health department (or IDPH in a county without a delegated program)
Who can drill it An IDPH licensed water well contractor, on site or supervising
Water test for a new well Not required by the state code, but most county health departments collect a bacteria sample at the final inspection before they approve the well
Water test when a home sells Not required statewide (some lenders ask for a test, and a few counties have point-of-sale rules)
Biggest natural concern Arsenic in the glacial sand and gravel aquifers, including the Mahomet, plus radium and barium in deep sandstone wells
Typical household well depth County medians from about 40 feet in much of central Illinois to 430 feet in Mercer County (ISGS records)
Where to test Your county health department for bacteria, and an Illinois EPA accredited lab for chemistry

Who is in charge of an Illinois well

The state writes the rules, but your county health department is the office you deal with day to day. Here’s who does what:

Agency What it handles
Illinois Department of Public Health (IDPH), Private Water Program Writes the Water Well Construction Code (77 Ill. Adm. Code 920), licenses the individual water well contractors and pump installers (about 730 people), receives the well construction report and certifies the microbiology labs
County health departments Issue well permits and do the inspections under agreements with IDPH (about 90 local health departments take part), keep the permit file and sell bacteria sample kits
IDPH Division of Laboratories, Springfield Tests private well samples sent in through counties that don’t run their own lab
Illinois EPA, Environmental Laboratory Accreditation Program Accredits the labs that run chemistry tests
Illinois State Geological Survey (ISGS) Publishes the well construction records on its ILWATER map, searchable by address

Once the well passes its final inspection, the water quality is yours. Testing from then on runs through the county health department lab, the IDPH state lab and the Illinois EPA accredited commercial labs.

What is required, and what is left to you

Illinois checks a new well before anyone drinks from it. Every new well needs:

  • A permit first. Apply to the county health department before drilling. The permit checks the site against setbacks from septic systems, property lines and other sources.
  • A licensed contractor on site. The contractor must hold an IDPH water well contractor license and build the well to the code: steel or approved plastic casing, grout, the setbacks and a sanitary well cap above grade.
  • Disinfection. The contractor disinfects the new well. The state code sets no sample requirement, but most county health departments collect a bacteria sample at the final inspection, and that sign-off is what the building department wants before occupancy.
  • The construction report. The contractor files it with IDPH after the well is built.

After that, Illinois requires nothing: no test at sale and no periodic test. The seller’s disclosure asks about the water supply, and some lenders require a water test before closing. Here’s where the state stands:

At a glance

Water test for a new wellNot required statewide

A permit from the county health department (or IDPH where the county has no delegated program) is required before a private well is drilled, the well must be built by an IDPH licensed water well contractor to the Illinois Water Well Construction Code (steel or approved plastic casing, grout, the setbacks from septic systems and other sources, a sanitary well cap above grade), and the contractor files a well construction report with IDPH. Under the code the contractor disinfects the new well. The state code sets no statewide sample requirement, but most county health departments collect a bacteria sample at the final inspection before they approve the well; the health department's sign-off is what the building department wants before occupancy.

Water test when a home is soldNot required statewide

No statewide requirement. The Illinois Residential Real Property Disclosure Report asks the seller about the water supply and any known defects, and some lenders require a water test before closing. A few counties run point-of-sale well and septic inspection programs under local ordinance, so ask the county health department.

What the state recommends

IDPH recommends testing a private well every year for coliform bacteria and nitrate, after any repair or flooding, and whenever the taste, color or smell changes; a chemistry panel (arsenic, iron, manganese, hardness, chloride, sulfate) when the well is new or every few years; and, depending on the aquifer, radium and barium for deep sandstone wells in northern Illinois, arsenic for wells in the Mahomet and other glacial aquifers of central Illinois, and pesticides and nitrate for shallow wells in farm country. County health department labs run the bacteria test cheaply, and the IDPH state lab tests samples submitted through the county.

Free or low-cost testingAvailable

No statewide free program. Most county health departments sell a bacteria (and often nitrate) sample kit for a small fee and explain the result, and the IDPH Division of Laboratories runs the bacteria test for counties without their own lab. The Illinois State Water Survey and university extension programs run periodic free nitrate and arsenic screening clinics in farm counties.

What the water is like in each part of Illinois

Illinois wells draw from three very different sources, and the depth swings more with the geology than in most states.

Region Typical household well What to expect
Central Illinois and the river valleys (including the Mahomet aquifer) County medians about 40 to 190 ft, mostly in sand and gravel. Sangamon and Madison county medians are under 60 ft Very hard water, high in iron and manganese. The Mahomet and other glacial sand and gravel aquifers carry naturally occurring arsenic, with no taste to warn you. Shallow wells in farm country pick up nitrate and atrazine in wet springs.
Chicago collar counties (glacial drift) County medians about 120 to 200 ft. Most McHenry wells run 70 to 200 ft, Lake 90 to 230 ft Hard water with iron and manganese, and arsenic in parts of the northeast. Road salt is pushing chloride up in wells near the Chicago interstates.
Northern bedrock (Kane, Cook, Will, Jo Daviess and the northern tier) County medians about 200 to 320 ft into dolomite and sandstone, and Kane County wells run 200 to 660 ft Deep wells reach the Cambrian-Ordovician sandstone, which is reliable but brings radium and barium above the standards in many places. Fluoride is locally high in deep aquifers.
Southern Illinois Shallow bored wells, or bedrock wells with county medians of about 250 to 280 ft Thin drift and tight bedrock, so wells are shallow and low-yielding. Old large-diameter bored wells often fail bacteria tests. Sulfur and methane turn up in the coal counties, and deep wells hit natural brine.

Across the glaciated north and center, most wells are finished in sand and gravel buried in the drift. For private wells drilled since 2000 on the ISGS ILWATER map, county medians run from about 40 feet in much of central Illinois to about 430 feet in Mercer County. Each county page below shows the typical depth of private wells on the ILWATER map.

What to test for

This combines the IDPH schedule with advice from University of Illinois Extension.

Test How often Who needs it
Coliform bacteria and nitrate Every year. Extension says spring is the best time Every well
Chemistry panel: arsenic, iron, manganese, hardness, chloride, sulfate When the well is new, then every few years Every well
Arsenic At least once, and again over time if the result is 5 ppb or more Wells in the Mahomet and other glacial sand and gravel aquifers of central and northeastern Illinois
Radium and barium At least once Deep sandstone wells in northern Illinois
Pesticides and nitrate Add to the yearly check Shallow wells in corn and soybean country
Nitrate right away When a baby under 6 months will drink the water Homes with an infant
Full retest After repairs, flooding, a fire, any time the well is opened, or a change in taste, color or smell Every well

Why arsenic gets top billing: it is common in the Mahomet and other glacial sand and gravel aquifers, and you can’t taste, see or smell it. In a 1985 Tazewell County survey, 59% of wells were at or above 10 ppb. IDPH says naturally occurring arsenic covers the northern two-thirds of the state and shows up most often in sand and gravel aquifers of glacial origin. Its advice is simple: the test costs relatively little, so when in doubt, test. If a result comes back high, our arsenic guide and treatment sizing tool walk you through the next step, and the shock chlorination calculator helps after a positive bacteria test.

Certified labs and the county health departments

Illinois splits the accreditation. IDPH certifies the microbiology labs and the Illinois EPA accredits the chemistry labs. You have three routes:

Option Best for Cost
County health department lab (DuPage, Lake, McHenry and Will) The yearly bacteria test, with kits sold at the counter A small fee
Other county health departments, through the IDPH Division of Laboratories in Springfield The yearly bacteria test, often nitrate too, with staff to explain the result A small fee for the kit
Accredited commercial lab Arsenic, radium, barium, metals, pesticides or a lender’s test Varies by lab

Illinois has no statewide free testing program. The Illinois State Water Survey and university extension programs run periodic free nitrate and arsenic screening clinics in farm counties.

The commercial labs below hold IDPH microbiology certification, Illinois EPA chemistry accreditation, or both, from the state lists of December 2025.

See all 31 certified labs in Illinois

Licensed water well and pump installation contractors

Three things to know before you hire in Illinois:

  • Illinois licenses the person, not the company. The licensee has to be on site or supervising the work.
  • There are three licenses. A water well contractor license covers drilling, modifying and sealing wells. A pump installation contractor license covers the pump and pressure system. The combined license covers both.
  • Some work across the state line. A few dozen licensees are based in Iowa, Indiana, Wisconsin and Missouri.

Every profile below is built from the IDPH contractor search as of September 2026, with the licensees at each business address grouped together and every license number shown. Where the ISGS ILWATER records list wells under a licensee’s name, the profile shows how many wells they have drilled since 2016, the counties they work in and the typical depth and yield.

See all 277 licensed contractors in Illinois

By county

Chicago and its suburbs are on Lake Michigan water, so well use is uneven:

  • Almost nobody: about 1% of residents in Cook County and 2% in Williamson County
  • One in ten to one in five: Will (10%), Lake (11%), Kendall (15%) and McHenry (18%) counties
  • Four in ten or more: Cumberland (40%), Fayette (41%), Mason (42%), Jasper (49%) and Henderson (58%) counties

Each county page carries its well population, the typical depth of private wells on the ILWATER map, the nearest certified labs and the licensed contractors based there.

Illinois well water questions

Do I need a permit to drill a well in Illinois?

Yes. Apply to your county health department (or IDPH in a county without a delegated program) before drilling. The permit checks the site against the setbacks from septic systems, property lines and other sources, and the well is inspected before it is approved for use. Most county health departments collect a bacteria sample at that inspection. The contractor must hold an IDPH water well contractor license.

Is a water test required when I sell my house?

Not by the state. The seller’s disclosure covers the water supply, some lenders require a water test before closing, and a handful of counties have point-of-sale inspection ordinances, so check with the county health department.

How often should I test my well in Illinois?

Every year for coliform bacteria and nitrate, ideally in spring. Run a chemistry panel when the well is new and every few years after, and test for arsenic, radium and barium at least once, depending on your aquifer. Test again after flooding, repairs or a change in taste, color or smell.

How do I find the record for my well?

Open the ISGS ILWATER map and search by address or zoom to the property. Records for wells drilled since the 1960s show the driller, depth, casing, the formations passed through and the tested yield. The county health department also keeps the permit file.

Where do I get a bacteria test?

From your county health department. Most sell a sample bottle for a small fee, either testing it in their own certified lab or sending it to the IDPH Division of Laboratories, and the environmental health staff will explain the result and what to do about a positive.

My well has arsenic, radium or iron. Can it be fixed?

Yes. Arsenic is handled by a point-of-use reverse osmosis unit for drinking water or a whole-house adsorption system. Radium is handled by a water softener or reverse osmosis, and iron and manganese by an oxidizing filter or softener. Test again after installation and yearly to confirm the system is keeping up, and have a licensed pump installation contractor do any work on the pump or pressure system.