Private well guide

Well Water in Virginia: Testing, Rules, Labs and Licensed Contractors

About 1,431,000 people in Virginia get their water from a private well, by the U.S. Geological Survey's estimate. Here is what the state requires, where to get it tested, and who is licensed to work on it.

227Licensed contractorschecked against state records
36Certified labsfrom the state certified list
114Counties covered
1,431,000People on private wells18% of residents (USGS, 2010)

The short version: About 1.4 million Virginians, 18% of residents, drink from a private well (USGS estimate, 2010). In many rural counties of the Piedmont, the Northern Neck and Southside, most residents do. Virginia inspects a new well and tests its water before it is used, and it has a standing low-cost testing program for the years after. Nothing is required when a home is sold, so the yearly bacteria test is up to you.

Virginia at a glance
Permit to drill a home well Yes, a construction permit from the local health department before drilling
Who can drill it A contractor licensed with the Water Well/Pump specialty, with a certified water well systems provider on the rig
Water test for a new well Required. The health department inspects the well, and a bacteria sample must pass before it is used
Water test when a home sells Not required statewide (some lenders ask for one)
Most common problem Coliform bacteria, found in about 40% of the wells the Virginia Household Water Quality Program tests
Typical household well depth Varies widely across the state. Logs of nearby wells are the best guide
Where to test An Extension drinking water clinic ($70 a kit), the local health department or a DCLS-certified lab

Who is in charge of a Virginia well

The Department of Health owns private wells, but four offices have a hand in them. Here’s who does what:

Agency What it handles
Virginia Department of Health, Office of Environmental Health Services, through the local health departments Issues the construction permit before a well is drilled, sets the site, the setbacks from septic systems and property lines and the casing and grout (12VAC5-630), then sends an environmental health specialist to inspect the finished well and take a bacteriological sample
Department of Professional and Occupational Regulation (DPOR) Licenses Class A, B and C contractors with the Water Well/Pump specialty through the Board for Contractors, and certifies the water well systems providers who work on the rig
Division of Consolidated Laboratory Services (DCLS) Certifies drinking water labs
Virginia Household Water Quality Program (Virginia Tech and Virginia Cooperative Extension) Runs low-cost drinking water clinics and carries the state’s testing advice

The well is not approved for use until that first sample passes. After that, the water is yours to look after.

What is required, and what is left to you

Virginia asks a lot up front, but it asks once. Every new well needs:

  • A health department permit. You or your contractor apply to the local health department before any drilling.
  • A licensed contractor. The business needs a Class A, B or C license with the Water Well/Pump specialty, and the person on the rig must be a certified water well systems provider.
  • Construction to the Private Well Regulations. That means grouted casing and setbacks of 50 feet from septic tanks and 50 to 100 feet from drainfields, depending on how the well is built.
  • An inspection and a passing bacteria test. The health department inspects the finished well and takes the sample. The inspection statement is your record of the well.

That is a solid start, and it is also the last time anyone official looks at the water. Nothing is required when a home is sold, and nothing is required in the decades between. Here’s where the state stands:

At a glance

Water test for a new wellRequired

Yes. A private well needs a construction permit from the local health department before drilling, must be built by a DPOR-licensed contractor with the Water Well/Pump specialty to the Private Well Regulations (grouted casing, setbacks of 50 ft from septic tanks and 50 to 100 ft from drainfields, depending on the well class), and after completion the health department inspects it and requires a bacteriological sample that passes before the well is placed in service. The inspection statement is your record of the well.

Water test when a home is soldNot required statewide

No statewide requirement. The Residential Property Disclosure Act does not require a water test. Some lenders require a water test before closing, and buyers can ask the local health department for the well's construction permit and inspection file.

What the state recommends

The Virginia Department of Health and the Virginia Household Water Quality Program recommend a coliform bacteria test every year and nitrate at least every three years, with a broader first test for hardness, iron, manganese, pH, sodium, copper, lead, arsenic and fluoride. Add radon and uranium in the Piedmont and Blue Ridge, sodium and chloride in Coastal Plain wells, and test again after flooding, well work or a change in taste, color or smell.

Free or low-cost testingAvailable

The Virginia Household Water Quality Program (Virginia Tech and Virginia Cooperative Extension) runs county drinking water clinics through the year: you pick up a kit from the Extension office, drop the sample back, and get results for 28 tests (bacteria, nitrate, metals, hardness, pH and more) with an interpretation meeting, for $70 a kit, free in counties with grant funding. Local health departments and the VDACS regional animal health laboratories also run a bacteria test for a small fee.

What the water is like in each part of Virginia

Virginia has five groundwater provinces and each has its own habit. Find yours below.

Region Typical household well What to expect
Coastal Plain (east of I-95) Varies widely; see nearby well logs Sand aquifers and soft water that turns salty and high in sodium and fluoride with depth. Iron and manganese are common, with arsenic in places and nitrate on the Eastern Shore.
Piedmont (Fairfax to Danville) Varies widely; see nearby well logs Fractured granite and gneiss. Yields are modest and the water is often acidic enough to corrode plumbing, so lead and copper at the tap are a Piedmont problem, not a well problem. Radon and uranium follow the granite.
Shenandoah Valley and the Valley and Ridge Varies widely; see nearby well logs Limestone, which means hard water, fast-moving groundwater, and bacteria and nitrate from farms and septic systems.
Blue Ridge and the southwest coalfields Varies widely; see nearby well logs Iron and manganese, corrosive water in the Blue Ridge and, near old mines, sulfate and metals.

Depth varies widely across the state, even between neighbors. Logs of nearby wells are the best guide, and our well record lookup shows you where to find them.

Bacteria is the test Virginia wells fail most often. A first broad panel sorts out the rest.

What to test for

This combines the Virginia Department of Health’s schedule with the advice from Virginia Cooperative Extension and the Virginia Household Water Quality Program. Virginia’s problems are quiet ones: corrosive water that pulls lead from pipes, radon in the Piedmont, sodium in the Coastal Plain.

Test How often Who needs it
Total coliform and E. coli bacteria Every year Every well and spring
Nitrate Every year by VDH’s schedule, and at least every 3 years by Extension’s Every well, and Shenandoah Valley farm country and the Eastern Shore most of all
First broad panel: hardness, iron, manganese, pH, sodium, copper, lead, arsenic and fluoride Once to start, then every 3 to 5 years if nothing turns up Every new well, and any well you just bought
Lead More often if the water is corrosive (pH under 6) Piedmont and Blue Ridge homes, and homes with lead pipes (built before 1930) or lead solder (before 1988)
Radon, uranium and gross alpha At least once Every well, and the Piedmont and Blue Ridge most of all
Sodium and chloride With the first panel Deep Coastal Plain wells
Fluoride Every 5 years Homes where children under 5 drink the water
PFAS With the first panel Wells near airfields and military bases
Full retest After flooding, well work or a change in taste, color or smell Every well

Why bacteria gets top billing: the Virginia Household Water Quality Program finds coliform bacteria in about 40% of the wells it tests, and E. coli in about 8% to 10%. You can’t taste or smell either one. If a result comes back bad, our shock chlorination calculator walks you through disinfecting the well, and our arsenic guide, uranium guide and treatment planner cover the rest.

DCLS-certified labs and public labs

You have three ways to get tested in Virginia:

Option Best for Cost
Virginia Household Water Quality Program drinking water clinic, through your county Extension office A broad first panel with the results explained at a meeting $70 a kit for 28 tests, including bacteria, nitrate, lead, arsenic and uranium. Free in counties with grant funding
Local health department or a VDACS regional animal health laboratory A bacteria-only check A small fee
DCLS-certified commercial lab Metals, radon, uranium, the wider panel, or a lender’s test Varies by lab. The program says a comparable panel costs more than $300

The clinics run through the year. You pick up a kit from the Extension office, drop the sample back, and get your results at an interpretation meeting. Help with the fee may be available through SERCAP.

The VDACS laboratories are in Harrisonburg, Lynchburg, Warrenton and Wytheville. Virginia certifies drinking water labs through the Division of Consolidated Laboratory Services, and the labs below hold current certification for at least the tests a well owner needs. Most of the commercial labs mail bottles anywhere in the state.

See all 36 certified labs in Virginia

Licensed water well contractors

Three things to know before you hire in Virginia:

  • Check two credentials. The business needs a contractor license with the Water Well/Pump specialty, and the person on the rig must be a certified water well systems provider. Both show up on DPOR’s license lookup.
  • The license class rarely matters for a household well. Class A licenses have no project limit, and Class B and C are limited to smaller jobs.
  • Your contractor normally handles the permit. The health department permit has to be in place before drilling starts, so ask who is filing it.

Every contractor below holds a current Virginia contractor license with the Water Well/Pump specialty, checked against the DPOR regulant list, which covers drilling, pump work, repairs and abandonment. Where the state record ties certified water well systems providers to the business, they are named on the profile with their certificate numbers and expiry dates.

See all 227 licensed contractors in Virginia

By county and city

Well use swings hard from place to place:

  • Almost nobody in the cities and inner suburbs. About 0.1% of Arlington County residents, 0.4% in the city of Richmond, 1% in Norfolk and 3% in Fairfax County drink from a private well.
  • About a third in the middle. Hanover County is at about 34%, Augusta and Shenandoah counties 33% and Albemarle County 31%.
  • More than 80% in the top counties. About 95% of residents in King and Queen and Amelia counties, 87% in Rappahannock, 85% in Cumberland, 83% in Louisa and 81% in Buckingham and Appomattox.

Virginia’s independent cities are listed alongside the counties, and the ones with almost no wells are left out. Each page carries its well population, the nearest certified labs and the licensed contractors based there.

Virginia well water questions

Do I need a permit to drill a well in Virginia?

Yes, from your local health department, before any drilling. The permit covers the site, setbacks and construction, and the well is inspected and its water tested for bacteria before it can be used. Your licensed contractor normally handles the application.

Is a water test required when I sell my house in Virginia?

No. Virginia has no statewide requirement, and the Residential Property Disclosure Act does not call for one. Some lenders require a water test before closing. Buyers can also ask the local health department for the well’s permit and inspection file.

How often should I test my well in Virginia?

Every year for total coliform and E. coli bacteria, and nitrate every year to every 3 years. Start with a broad panel, test for radon and uranium at least once, and retest after flooding, well work or a change in taste, color or smell.

How deep are wells in Virginia?

Depth varies widely across the state, because it depends on the rock or sand under your property. Logs of nearby wells are the best guide. Use our well record lookup, or ask the local health department for permit files near you.

How do I find the record for my well?

Ask the local health department for the well’s construction permit, completion report and inspection statement. Records for wells drilled since the 1992 regulations are usually on file, and many districts can search by address. Older wells often have no record.

Where can I get a cheap, reliable test?

The Virginia Household Water Quality Program’s county drinking water clinics test for 28 things for $70 a kit, with an explanation of the results, and they are free where grant money covers them. For a bacteria-only check, the local health department or a VDACS regional laboratory is the cheapest route.

Which lab should I use?

Any lab on the DCLS certified list with drinking water scope. Use a health department, VDACS or Extension clinic for the routine check and a commercial lab for metals, radon or a full panel.