Private well guide

Well Water in Pennsylvania: Testing, Rules, Labs and Licensed Contractors

About 2,202,000 people in Pennsylvania get their water from a private well, by the U.S. Geological Survey's estimate. Here is what the state requires, where to get it tested, and who is licensed to work on it.

294Licensed contractorschecked against state records
138Certified labsfrom the state certified list
67Counties covered
2,202,000People on private wells17% of residents (USGS, 2010)

The short version: About 2.2 million Pennsylvanians, 17% of residents, drink from a private well (USGS estimate, 2010). The state has no statewide rule that says a well has to be built a certain way, tested when it is drilled, or tested when the house is sold. If you own a well here, you are the water department. Penn State research has found that roughly 40% of private wells fail at least one drinking water standard.

Pennsylvania at a glance
Permit to drill a home well No statewide permit or construction standard. Some counties and townships, such as Chester County, have their own ordinances
Who can drill it A driller licensed by DCNR, though the license does not require proof of drilling knowledge
Water test for a new well Not required statewide
Water test when a home sells Not required statewide (some lenders require one, and some townships do too)
Most common problem Coliform bacteria
Typical household well depth Varies widely across the state. Logs of nearby wells are the best guide
Where to test A state accredited lab, a DEP regional office bacteria kit, or a Penn State mail-in kit

Who is in charge of a Pennsylvania well

Two state agencies touch private wells, and neither one regulates how they’re built:

Agency What it handles
Department of Conservation and Natural Resources (DCNR) Licenses water well drillers, receives the well completion reports, and runs the Pennsylvania Groundwater Information System
Department of Environmental Protection (DEP) Water quality questions, testing guidance, the list of accredited labs, and low-cost bacteria kits at its regional offices
Counties and townships Local well ordinances where they exist, Chester County being the best known
Penn State Extension and county conservation districts Local answers, often faster than either state agency, plus test kits at participating county Extension offices

DEP publishes guidance rather than rules, so the water in your well is entirely your call.

What is required, and what is left to you

Pennsylvania is one of the few states with no well construction standards. Here’s what that leaves:

  • No statewide building rules. Most states set a minimum for how deep a casing goes, how a well is grouted and what has to happen before anyone drinks from it. Pennsylvania does not.
  • A licensed driller. DCNR licenses the drillers, but the license does not require proof of drilling knowledge.
  • A completion report. Drillers are required to file a well completion report with DCNR.
  • Local rules where they exist. Some counties and townships have filled the gap with their own ordinances, so check your county page.

Testing is left to you. Here’s where the state stands:

At a glance

Water test for a new wellNot required statewide

Pennsylvania has no statewide private well construction standards or mandatory testing. DCNR licenses drillers but states that licensure does not require demonstrated knowledge of proper drilling. Some counties and townships (for example Chester County) have local well ordinances.

Water test when a home is soldNot required statewide

No statewide requirement. Some lenders require a water test; some townships require testing at transfer.

What the state recommends

DEP recommends testing every year for total coliform bacteria, nitrate, total dissolved solids and pH, plus additional tests for any suspected contaminant. Penn State Extension recommends a broader panel every 3 years (metals, hardness, chloride, sulfate) and testing after flooding, repairs or a change in taste, odor or color.

Free or low-cost testingAvailable

DEP regional offices sell low-cost bacteria test kits. Penn State Agricultural Analytical Services Lab offers mail-in drinking water kits at cost.

What the water is like in each part of Pennsylvania

Depth, yield and chemistry are set by the rock under your county. Here’s the broad picture.

Region Typical household well What to expect
Limestone valleys (carbonate rock) Drilled into carbonate rock The hardest water and the highest pH. In the USGS statewide network, the highest nitrate and arsenic readings came from a carbonate well, and arsenic ran highest in the Ridge and Valley region overall.
Southeast crystalline rock (Piedmont) Drilled into crystalline bedrock The softest and most acidic water in the USGS network, with pH around 4.5 to 5.5. That kind of water eats at copper and lead plumbing.
Northern and western sandstone and shale uplands Drilled into sandstone and shale Iron and manganese problems are concentrated here. Methane turns up in gas regions, and radon is common: in Lycoming County, 50 of 75 wells topped the proposed radon standard.

Depth varies widely across the state, even between neighbors. Logs of nearby wells are the best guide, and our well record lookup shows you where to find them.

What to test for

This combines DEP’s yearly checklist with the broader schedule from Penn State Extension.

Test How often Who needs it
Total coliform and E. coli bacteria Every year Every well
Nitrate, pH and total dissolved solids Every year, as DEP recommends Every well
A wider panel: metals, hardness, chloride and sulfate Every 3 years Every well
Chloride and barium Every 3 years Wells near gas or oil drilling
Iron, manganese, sulfate and aluminum Every 3 years Wells near mining
Nitrate and a pesticide scan Every 3 years Wells in farm country
pH, corrosivity, copper and lead When you see blue-green stains, taste metal or find small plumbing leaks Homes with acidic water
Full retest After flooding, well repairs, or a change in taste, odor or color Every well

Why bacteria gets top billing: in the Penn State research behind the 40% figure, coliform bacteria was the most common reason a well failed, and Penn State Extension says about half of private water supplies in the state have never been tested at all. Radon deserves a look too, since it topped the proposed standard in 64% of wells in the USGS statewide network. If a result comes back bad, our shock chlorination calculator, arsenic guide and treatment planner walk you through the next step.

Testing: where to send it

You have three good routes in Pennsylvania:

Option Best for Cost
Penn State Agricultural Analytical Services Lab Mail-in kits when no lab is close Check the lab for current prices
DEP regional office bacteria kit The yearly bacteria test Low cost
State accredited lab Full panels, metals and a lender’s test Varies by lab

Bacteria samples have to reach the lab within 24 hours, and many labs won’t take them on a Friday or before a holiday. For lead and copper, collect the first water out of the tap after it has sat in the pipes for at least 12 hours. Radon in water needs a lab employee to take the sample. If gas drilling or mining is planned nearby, have a neutral third party collect a baseline sample before work starts.

The labs below are on the state accredited list and accept samples from homeowners. If none is close, the Penn State lab’s mail-in kits are the easy fallback.

See all 138 certified labs in Pennsylvania

Licensed water well drillers

Three things to know before you hire in Pennsylvania:

  • A license isn’t a skills test. DCNR licensure does not require demonstrated drilling knowledge, so ask about experience and references.
  • Pump installers and treatment companies aren’t licensed separately. For that work, look for a driller who lists those services, or a plumber, and ask for references.
  • Ask for the completion report. Drillers are required to file one with DCNR, and many older wells have no record at all.

Every driller listed here appears on the DCNR licensed driller register, with the license number and the date we checked it.

See all 294 licensed contractors in Pennsylvania

By county

Well rules, well depth and water chemistry change from one county to the next in Pennsylvania:

  • Very few wells in the big cities. Only about 0.2% of Philadelphia County residents, 2% in Allegheny County and 3% in Delaware County drink from a private well.
  • About one in four or five in the middle. Lancaster County is at about 25%, Chester County 23%, Berks County 22% and York County 21%. Chester County also has its own well ordinance.
  • Most residents in the most rural counties. About 76% of Sullivan County residents, 73% in Fulton County and 66% in Wyoming County rely on a private well.

Pick yours for local ordinances, labs within 40 miles and the contractors who work there.

Pennsylvania well water questions

Does Pennsylvania require a water test when I buy a house with a well?

No. There is no statewide requirement, but some lenders require one, and some townships require testing at transfer. Even when nobody requires it, a bacteria and nitrate test before closing is the cheapest inspection you will pay for.

Who do I call about a problem with my well in Pennsylvania?

DEP handles water quality questions and DCNR handles driller licensing and well records. Your county conservation district or Penn State Extension office can often answer local questions faster than either.

Are there well records for my property?

Drillers are required to file a well completion report with DCNR. Many older wells have no record, but the Pennsylvania Groundwater Information System lets you search by location for wells with a filed log.

How deep are wells in Pennsylvania?

Depth varies widely across the state, because it depends on the rock under your property. Logs of nearby wells are the best guide. Use our well record lookup to find them in the Pennsylvania Groundwater Information System.

How often should I test my well in Pennsylvania?

Every year for total coliform bacteria, nitrate, pH and total dissolved solids, as DEP recommends. Penn State Extension adds a wider panel every 3 years, and a retest after flooding, repairs or any change in taste, odor or color.