Private well guide

Well Water in Maine: Testing, Rules, Labs and Licensed Contractors

About 511,000 people in Maine get their water from a private well, by the U.S. Geological Survey's estimate. Here is what the state requires, where to get it tested, and who is licensed to work on it.

135Licensed contractorschecked against state records
12Certified labsfrom the state certified list
16Counties covered
511,000People on private wells38% of residents (USGS, 2010)

The short version: About 511,000 Mainers, 39% of residents, drink from a private well (USGS estimate, 2010), one of the highest shares in the country. Maine never requires a water test, but most of those wells are drilled into granite and schist, which is why arsenic, radon and uranium are the tests that matter here. The state lab offers a kit that covers all three.

Maine at a glance
Permit to drill a home well No state permit (some towns require one)
Who can drill it A well drilling company licensed by the Maine Water Well Commission, using a licensed driller
Water test for a new well Not required statewide (a few towns want a bacteria test before occupancy, and some lenders do)
Water test when a home sells Not required, but the disclosure form asks when the well was last tested and what it found
Biggest natural concern Arsenic, with about one well in ten over the federal standard, plus radon and uranium from granite
Typical household well depth County medians of about 200 to 360 feet for domestic wells drilled since 2000 (Maine Geological Survey records)
Where to test The state Health and Environmental Testing Laboratory kit, sold through town offices and plumbing suppliers

Who is in charge of a Maine well

Most of the work runs through Maine CDC. Here’s who does what:

Agency What it handles
Maine Water Well Commission (run out of the Maine CDC Drinking Water Program) Licenses the drilling companies and the individual drillers, pump installers and geothermal installers, writes the construction rules and takes complaints
Maine CDC Health and Environmental Testing Laboratory, Augusta Provides the standard well water test kit and the interpretation of results
Maine CDC private well program Free technical help with choosing tests, reading results and picking treatment
Maine CDC Laboratory Accreditation Program Accredits drinking water labs, test by test
Maine Geological Survey Receives every well completion report. Its well database now holds nearly 100,000 records, searchable by town and map

There is no state permit for a household well and no state inspection. The water quality belongs to you.

What is required, and what is left to you

Maine regulates who builds a well and how, not what’s in the water. Every well needs:

  • A licensed company and driller. Both must be licensed by the Maine Water Well Commission.
  • Construction to the Commission’s rules. Steel casing at least 20 feet long, a sanitary cap, and a well cap above grade. The rules recommend seating the casing at least 10 feet into bedrock.
  • The right setbacks. The Water Well Commission’s rules require 100 feet from a septic disposal field and 60 feet from a septic tank.
  • A completion report. The driller files it with the Maine Geological Survey.

Maine does not require a water test on a new well or when a house is sold, though the seller’s disclosure asks when the well was last tested. Here’s where the state stands:

At a glance

Water test for a new wellNot required statewide

No statewide water test and no state permit for a household well. The well must be drilled by a Maine licensed well drilling company using a licensed driller, to the Commission's construction rules (steel casing at least 20 ft, with at least 10 ft into bedrock recommended, a sanitary cap, and a well cap above grade), and sited under the Commission's setback rules (100 ft from a septic disposal field, 60 ft from a septic tank). The driller files a well completion report with the Maine Geological Survey. A few towns require a bacteria test before a certificate of occupancy, and some lenders do.

Water test when a home is soldNot required statewide

No statewide requirement. Maine's residential property disclosure form asks whether the water supply is a private well, when it was last tested and whether any test found a problem, so a recent test is expected in practice, and some lenders require a water test before closing.

What the state recommends

Maine CDC recommends testing a private well every year for coliform bacteria and nitrate, and every three to five years for arsenic, uranium, radon, fluoride and manganese, the five contaminants Maine's bedrock wells carry most often (about one in ten wells is over the arsenic standard, and radon in water is common). The standard Maine well water kit covers all of these plus lead, iron, hardness and pH. Test again after flooding, well work, hydrofracturing or a change in taste, color or smell.

Free or low-cost testingAvailable

No statewide free program. The state Health and Environmental Testing Laboratory in Augusta sells the standard well water kit through town offices, plumbing supply stores and by mail, with the bacteria, nitrate, arsenic, uranium, fluoride and metals panel, and Maine CDC explains the results. Several counties and tribal health programs run periodic free arsenic screening.

What the water is like in each part of Maine

Maine’s bedrock wells draw from fractures in granite, schist and gneiss, and the rock leaves its mark.

Region Typical household well What to expect
Southern and western granite (Oxford, Cumberland and York counties) County medians of about 320 to 360 ft (York, Cumberland, Oxford) Radon dissolved in water is common here, and uranium follows the same rock. Arsenic turns up in parts of southern Maine.
Central Maine and the midcoast (the Augusta to Bangor corridor) County medians of about 240 to 280 ft (Penobscot and Waldo to Sagadahoc) The heart of Maine’s arsenic belt, with no taste or color to warn you. Central Maine adds PFAS from decades of sludge spreading on farmland around Fairfield, and the state is still mapping it.
Aroostook County Median of 200 ft, the shallowest county median in the state Nitrate shows up in shallow wells in the potato belt.
Dug and driven wells, anywhere Shallow, in sand and gravel These are the wells that fail bacteria and nitrate. Along the coast and near highways, chloride from seawater and road salt creeps in.

More than 90% of the wells in the state database are drilled bedrock wells. The depths above are medians of domestic wells drilled since 2000 in the Maine Geological Survey well database. Manganese, iron and fluoride are common enough statewide that the state kit tests for them, and hardness varies from one fracture to the next. Each county page below shows the typical depth of domestic wells in the state database.

What to test for

This follows the Maine CDC schedule, which UMaine Cooperative Extension also recommends.

Test How often Who needs it
Coliform bacteria, E. coli, and nitrate and nitrite Every year Every well
Arsenic, uranium, radon, fluoride and manganese Every 3 to 5 years Every well. These are the five Maine’s bedrock wells carry most often
Chloride, copper, hardness, iron, lead, magnesium, pH and sodium Every 3 to 5 years Every well, and coastal and roadside wells for chloride and sodium
A comprehensive or standard test of everything above Once, if the well has never been tested Every new well, and any home you are buying
Bacteria and nitrate right away When you are expecting a baby Homes with a pregnancy or an infant
Full retest After well work or hydrofracturing, after flooding, after the well runs dry and comes back, or after you install or replace treatment parts Every well
Full retest When the taste, color or smell changes Every well

Why arsenic gets top billing: Maine CDC says 1 in 10 wells in Maine has too much arsenic, concentrated in a belt from Augusta and the midcoast up to Bangor and in parts of southern Maine. You can’t taste, see or smell it. Radon in water and uranium come from the same granite, so one kit covers all three. If a result comes back high, our arsenic guide, uranium guide and treatment sizing tool walk you through the next step, and the shock chlorination calculator helps after a positive bacteria test.

Accredited labs and the state test kit

You have two ways to get tested in Maine:

Option Best for Cost
State Health and Environmental Testing Laboratory kit The whole Maine panel in one box: bacteria, nitrate, arsenic, uranium, fluoride and metals, plus lead, iron, hardness and pH Set by the lab. Call (207) 287-2727 for current prices
Accredited commercial lab PFAS, a quick bacteria test, or a lender’s test Varies by lab

For most owners the state kit is the route. It’s sold through town offices and plumbing suppliers, and you mail it back to Augusta. Results come with Maine CDC’s interpretation, and the private well program’s help with test choice and treatment is free. Maine has no statewide free testing program, but several counties and tribal health programs run periodic free arsenic screening.

Maine accredits drinking water laboratories test by test, and the in-state commercial list is short: a dozen labs from Kennebunk to Presque Isle, three of them PFAS-only and two bacteria-only. Every lab below comes from the Maine CDC list updated May 2026.

See all 12 certified labs in Maine

Licensed well drilling companies, drillers and pump installers

Three things to know before you hire in Maine:

  • Maine licenses both the company and the person. A licensed well drilling company has to use a licensed driller.
  • Grades matter. Drillers and pump installers are licensed as masters or journeymen, and some masters and journeymen work on their own.
  • Licenses run by calendar year. The current licenses expire December 31, 2026.

Every profile below is built from the Water Well Commission’s lists dated July 2026: the licensed well drilling companies, with the master and journeyman drillers and pump installers who work for them named and their grades shown (apprentices are counted), plus the licensed masters and journeymen who work on their own. Where the Maine Geological Survey database has reports under the company’s name, the profile shows how many wells it has filed since 2016, the counties it works in and the typical depth and yield of its wells.

See all 135 licensed contractors in Maine

By county

In half of Maine’s 16 counties, most residents drink from a well. These shares come from the same USGS 2010 estimate:

  • The fewest: 19% of residents in Cumberland County, 28% in Androscoggin and 32% in York
  • In the middle: Kennebec (42%), Franklin (43%), Sagadahoc (43%) and Knox (45%) counties
  • The most: Lincoln (68%), Hancock (67%) and Waldo (65%) counties

Each county page carries its well population, the typical depth of domestic wells in the state database, the nearest accredited labs and the licensed contractors based there.

Maine well water questions

Do I need a permit to drill a well in Maine?

Not from the state. The company and the driller must be licensed by the Maine Water Well Commission, the well must meet the Commission’s construction rules and the setbacks from your septic system, and the driller files the completion report. Some towns require a permit or a bacteria test before occupancy.

Is a water test required when I sell my house?

No. Maine has no statewide requirement, but the property disclosure form asks when the well was last tested and what it found, and some lenders require a water test before closing.

How often should I test my well in Maine?

Maine CDC says every year for coliform bacteria, E. coli and nitrate, and every 3 to 5 years for arsenic, uranium, radon, fluoride, manganese and the other basics. Test again after well work, when you’re expecting a baby, or when the water changes.

How do I find the record for my well?

Search the Maine Geological Survey well database by town, address or map. Records show the driller, depth, casing length, yield and the depth of the water-bearing fractures.

Where do I get the state test kit?

From your town office, many plumbing and hardware stores, or by calling the Health and Environmental Testing Laboratory at (207) 287-2727 to have one mailed. Fill the bottles as instructed and mail or drop them back to Augusta. Results come with Maine CDC’s interpretation.

My well has arsenic. Can it be fixed?

Yes. Most Maine owners install a point-of-use reverse osmosis unit under the kitchen sink for drinking and cooking water, or a whole-house adsorption system if the level is high. Both need a yearly test to confirm they are working. Maine CDC’s private well program can walk you through the choice, at (207) 287-4311 or toll free in Maine at 866-292-3474.