Private well guide

Well Water in Alabama: Testing, Rules, Labs and Licensed Contractors

About 536,000 people in Alabama get their water from a private well, by the U.S. Geological Survey's estimate. Here is what the state requires, where to get it tested, and who is licensed to work on it.

150Licensed contractorschecked against state records
14Certified labsfrom the state certified list
67Counties covered
536,000People on private wells11% of residents (USGS, 2010)

The short version: About 536,000 Alabamians, 11% of residents, drink from a private well (USGS estimate, 2010). In a few rural counties it is about half or more, led by Cleburne at 62%, Choctaw at 53% and Clay at 51%. Alabama licenses its drillers and sets a construction standard, but it tests nothing after the well is built. The water is yours to keep up with, and a county health department bacteria kit and a county Extension office chemistry test are the two cheap ways to do it.

Alabama at a glance
Permit to drill a home well None from the state for the owner. The driller notifies ADEM before drilling
Who can drill it An ADEM licensed water well driller
Water test for a new well Not required statewide
Water test when a home sells Not required statewide, and no mandatory seller’s disclosure (some lenders ask for one)
Most common problem Coliform bacteria, worst in north Alabama karst wells and shallow Coastal Plain wells
Typical household well depth Varies widely across the state. Logs of nearby wells are the best guide
Where to test Your county health department for bacteria, your county Extension office for chemistry, or an ADEM certified lab

Who is in charge of an Alabama well

ADEM handles the driller and the hole. Water quality belongs to Public Health and Auburn. Here’s how it splits up:

Agency What it handles
Alabama Department of Environmental Management (ADEM), Water Well Standards Program Licenses water well drillers under the Water Well Standards Act, writes the construction rules in chapter 335-9, and receives a notice before each well is drilled and a completion report after
ADEM laboratory certification Certifies drinking water labs. The list is written for public water systems and is short
Alabama Department of Public Health, Bureau of Clinical Laboratories Tests the bacteria samples that come in through the 67 county health departments
Alabama Private Well Program at Auburn University Runs the well owner education and the Extension water test
Geological Survey of Alabama Holds older well records

There is no state permit for the owner and no state inspection. Once the well is built, nobody checks the water unless you ask.

What is required, and what is left to you

Alabama regulates who builds the well and how. Every new well needs:

  • A licensed driller. The driller must hold an ADEM water well driller license.
  • Construction to the state standard. That means the 335-9 rules, including a sanitary seal. ADEM recommends setbacks such as 100 feet from a septic tank or field lines, and local rules may require them.
  • Disinfection. The driller is required to disinfect the new well.
  • The driller’s paperwork. A notice to ADEM before drilling and a completion report afterward.

After that, nothing. Alabama does not require a test of private well water when the well is new or when the house is sold. With no mandatory seller’s disclosure, a buyer has to ask. Public Health and Auburn advise a bacteria test every spring and a chemistry test every few years, and in north Alabama’s karst, a retest after heavy rain. Here’s where the state stands:

At a glance

Water test for a new wellNot required statewide

No statewide water test and no state permit for the owner. The Water Well Standards Act requires the well to be drilled by an ADEM-licensed water well driller to the 335-9 construction standards (including a sanitary seal; ADEM recommends setbacks such as 100 feet from a septic tank or field lines, and local rules may require them), and the driller must notify ADEM before drilling and file a well completion report afterward. The driller is required to disinfect the new well.

Water test when a home is soldNot required statewide

No statewide requirement. Alabama is a caveat emptor state with no mandatory seller's disclosure form, so nothing about the well has to be disclosed unless the buyer asks. Some lenders require a water test before closing.

What the state recommends

The Department of Public Health and the Alabama Private Well Program at Auburn recommend testing a private well every year, preferably in spring, for coliform bacteria, and every few years for nitrate, pH, hardness, iron, manganese, lead and copper (Auburn's W1 Total Water Analysis covers the chemistry). Add radon in the Piedmont, arsenic in the Black Belt and coastal plain, chloride and sodium near the coast and in deep Black Belt wells, PFAS in the Tennessee Valley around Decatur and near airfields, and test again after flooding, well work or a change in taste, color or smell.

Free or low-cost testingAvailable

No statewide free program, but two cheap routes. Every county health department sells the Department of Public Health bacteria kit (total coliform and E. coli, a few dollars per sample, results in a few days from the Mobile or Prattville branch laboratory), and any county Extension office will take a sample for Auburn University's W1 Total Water Analysis for a small fee, with the county agent explaining the result. The Alabama Private Well Program at Auburn (888-844-4785) runs periodic free screening events.

What the water is like in each part of Alabama

Alabama’s groundwater splits along the fall line that runs from Phenix City through Montgomery to Tuscaloosa. Find your part of the state below.

Region What to expect
Coastal Plain (south of the fall line, including the Wiregrass and the Gulf coast) Thick sands with plentiful water. It’s soft and acidic enough to corrode copper plumbing, nearly always high in iron, and often smells of sulfur. Nitrate shows up in shallow Wiregrass wells. Along the Gulf, Baldwin and Mobile county wells draw from sands that saltwater is slowly creeping into.
Black Belt The chalk yields nothing, so wells go down to the Eutaw and Gordo sands, where the water can turn salty.
Piedmont (east-central Alabama) Fractured granite and gneiss with modest yields. Expect radon and acidic water.
North Alabama limestone (Tennessee Valley, Cumberland Plateau, Valley and Ridge) Hard water through karst that carries bacteria and cloudy runoff straight to the well after storms. Karst makes depth and yield hard to predict. Nitrate turns up in shallow wells around Sand Mountain’s poultry farms, and the Tennessee River corridor around Decatur has known PFAS contamination in groundwater.

Depth varies widely across the state, and Alabama publishes no public well log database. Your driller’s completion report is the best record of your own well’s depth, and logs of nearby wells are the best guide. Try our well record lookup.

One thing is the same everywhere: bacteria is the test Alabama wells fail most.

What to test for

This follows the schedule from the Department of Public Health and Alabama Extension’s Private Well Program at Auburn.

Test How often Who needs it
Total coliform, fecal coliform and E. coli, nitrate, total dissolved solids and pH Every year, ideally in spring Every well
Chloride, fluoride, sulfate, lead, hardness, calcium, copper, iron and manganese Every 2 to 3 years Every well
Radon Add to the every-few-years check Piedmont wells
Arsenic Add to the every-few-years check Black Belt and Coastal Plain wells
Chloride and sodium Add to the every-few-years check Wells near the coast and deep Black Belt wells
PFAS At least once Tennessee Valley wells around Decatur, and wells near airfields
Bacteria again After heavy rain Karst wells in north Alabama
Full retest When the well is new or back in service, after flooding or repairs, if a neighbor’s well is contaminated, if someone gets a stomach illness, or after a change in taste, color or smell Every well

Why bacteria gets top billing: in an Auburn University study of private wells in southern Alabama published in 2025, total coliform turned up in 25% of wells, and 68% of wells changed from one round of sampling to the next, often testing positive once and clean the next time. pH was outside the recommended range in 92% of wells, which is the acidic water that eats copper plumbing. Iron came in high in 7%, lead in 6%, and nitrate and arsenic in 1% each. One clean test doesn’t mean the next one will be. If a result comes back bad, our coliform bacteria guide, shock chlorination calculator and treatment planner walk you through the next steps.

Certified labs, the county health department and the Extension test

You have three ways to get tested in Alabama:

Option Best for Cost
County health department The yearly bacteria test (total coliform and E. coli), run by the Department of Public Health laboratory in Mobile or Prattville A few dollars for the kit
County Extension office Auburn’s W1 Total Water Analysis: pH, hardness, nitrate, iron, manganese and a dozen other elements, with the county agent explaining the result A small fee
ADEM certified commercial lab Metals, VOCs, radon, PFAS, or a lender’s test Varies by lab

For bacteria, buy the bottle at your county health department’s environmental office, follow the sampling instructions and bring it back the same day. The result comes back in a few days. Chemistry samples go through any county Extension office to Auburn’s Soil, Forage and Water Testing Laboratory. Auburn notes that lab isn’t certified for drinking water, so the W1 is a screen. Use a certified lab when a lender needs the result. There’s no statewide free program, but the Alabama Private Well Program (888-844-4785) runs free screening events now and then.

ADEM certifies labs for public water system compliance, and the in-state commercial list is a dozen labs in Auburn, Birmingham, Decatur, Florence, Dothan, Tuscaloosa and Mobile. Most mail bottles anywhere in the state. Every lab below comes from the ADEM certified lists dated April 2026, the Department of Public Health or Auburn, with the tests each is certified or set up to run.

See all 14 certified labs in Alabama

ADEM-licensed water well drillers

Three things to know before you hire in Alabama:

  • The state licenses the driller, not the company. Ask for the driller’s ADEM license number. Licenses renew every September 30.
  • There’s no separate pump installer license. Alabama licenses drillers only, so the driller who builds the well also sets the pump.
  • There are no well counts to compare. Alabama publishes no well record database, so you can’t look up how many wells a driller has filed. Ask for local references instead.

Every profile below is built from ADEM’s AL-OpCert public driller search, grouped under the business each driller works for, with the license numbers shown. The state record rarely carries a phone number, so the numbers shown come from the business listings.

See all 150 licensed contractors in Alabama

By county

Well use swings hard from county to county:

  • Almost nobody: under 1% of residents in Jefferson County, and about 3% in Montgomery, Madison and Shelby
  • About one in five: 20% in Houston and Dale counties, 22% in Chilton and 23% in Clarke
  • About half or more: 49% in Randolph, 51% in Clay, 53% in Choctaw and 62% in Cleburne

Each county page carries its well population, the nearest certified labs and the licensed drillers based there.

Alabama well water questions

Do I need a permit to drill a well in Alabama?

Not from the state. Your driller must hold an ADEM water well driller license, notify ADEM before drilling and file a completion report afterward. A few county health departments have their own well rules, so a call to the county environmental office before drilling is worth making.

Is a water test required when I sell my house in Alabama?

No. Alabama has no statewide requirement and no mandatory seller’s disclosure. Some lenders require a water test before closing.

How do I get my well tested for bacteria?

Go to your county health department’s environmental office, buy the sample bottle, collect the sample the way the instructions say and bring it back the same day. It goes to the Department of Public Health laboratory in Mobile or Prattville, and the result comes back in a few days.

How do I get the chemistry tested?

Take a sample to your county Extension office for Auburn University’s W1 Total Water Analysis, which covers pH, hardness, nitrate, iron, manganese and a dozen other elements for a small fee. For metals, VOCs, radon or PFAS, use one of the ADEM certified commercial labs above.

How often should I test my well in Alabama?

Every year, ideally in spring, for coliform bacteria, E. coli, nitrate, total dissolved solids and pH. Every 2 to 3 years, add chloride, fluoride, sulfate, lead, hardness, calcium, copper, iron and manganese. Retest karst wells after heavy rain, and any well after flooding, repairs or a change in taste, color or smell.

How do I find the record for my well?

Alabama has no public well log database. The driller files a completion report with ADEM, which you can request from the Water Well Standards Program, and the Geological Survey of Alabama holds older records. If you don’t have the report, ask the driller named on the pump or pressure tank.