Private well guide

Well Water in Oregon: Testing, Rules, Labs and Licensed Contractors

About 523,000 people in Oregon get their water from a private well, by the U.S. Geological Survey's estimate. Here is what the state requires, where to get it tested, and who is licensed to work on it.

162Licensed contractorschecked against state records
20Certified labsfrom the state certified list
36Counties covered
523,000People on private wells14% of residents (USGS, 2010)

The short version: About 523,000 Oregonians, 14% of residents, drink from a private well (USGS estimate, 2010). Oregon doesn’t require a test of a new well’s water, but it’s one of only a handful of states that requires a well test when a house is sold, for arsenic, nitrate and total coliform. Between sales the water is yours to watch, and there’s more naturally occurring arsenic and farm-country nitrate in Oregon’s groundwater than most owners realize.

Oregon at a glance
Permit to drill a home well No permit as such. The constructor files a start card with OWRD and pays the fee before drilling
Who can drill it An OWRD licensed and bonded water supply well constructor, or the landowner with a Landowner’s Water Well Permit
Water test for a new well Not required by the state (some counties and some lenders ask for a bacteria test)
Water test when a home sells Required. The seller tests for arsenic, nitrate and total coliform and reports to OHA
Biggest natural concern Arsenic, followed by nitrate in farm country
Typical household well depth County medians run from about 80 feet in Deschutes County to 470 feet in Jefferson County (OWRD state well records)
Where to test A lab accredited through ORELAP that accepts samples from the public

Who is in charge of an Oregon well

Two state agencies split the job. One handles the hole in the ground, the other handles the water:

Agency What it handles
Oregon Water Resources Department (OWRD), Well Construction and Compliance Section Licenses and bonds water supply well constructors, writes the construction standards in OAR 690-210, collects a start card and fee before every well is drilled and a well report within 30 days after. It publishes the reports in its online well log query, searchable by township, county or owner
Oregon Health Authority (OHA), Domestic Well Safety Program Runs the Domestic Well Testing Act, keeps the statewide database of real estate transaction results and helps owners read their results, (971) 673-0440
ORELAP, OHA’s lab accreditation program Accredits the labs

Oregon’s well log archive is public and easy to search. Water quality, outside of a sale, is up to you.

What is required, and what is left to you

Every new domestic well in Oregon needs:

  • A licensed, bonded constructor. A landowner may drill a well on their own land with a Landowner’s Water Well Permit, under the same standards.
  • A start card before drilling. The constructor files it with OWRD and pays the fee, then attaches a metal well ID tag.
  • Construction to the OAR 690-210 standard. Setbacks are 50 feet from a septic tank and 100 feet from a drainfield.
  • A well report within 30 days. It goes into OWRD’s public archive.

Oregon does not require a test of a new well’s water, but it does require one at sale: the seller must have an accredited lab test for arsenic, nitrate and total coliform and report the results to OHA within 90 days. Between sales the water is yours to watch. Here’s where the state stands:

At a glance

Water test for a new wellNot required statewide

No statewide water test on a new well. The well must be built by an OWRD-licensed, bonded water supply well constructor (or by the landowner under a Landowner's Water Well Permit) to the OAR 690-210 standards, with a start card filed and the fee paid before drilling, a metal well ID tag attached, and a well report filed with OWRD within 30 days. Setbacks are 50 ft from a septic tank and 100 ft from a drainfield. Some counties ask for a bacteria test before a building permit is finaled, and some lenders do.

Water test when a home is soldRequired

Yes. Oregon's Domestic Well Testing Act (ORS 448.271, OAR 333-061-0305 to 0335) requires the seller of a property with a domestic well to have the water tested by an ORELAP-accredited lab for arsenic, nitrate and total coliform bacteria, give the results to the buyer and report them to the Oregon Health Authority within 90 days of the sale. It is one of only a handful of state laws in the country that require a private well test at transfer.

What the state recommends

The Oregon Health Authority recommends testing a domestic well every year for coliform bacteria and nitrate, and every three to five years for arsenic (found across the Willamette Valley, the Tualatin basin, Lane County and Klamath and Lake counties), plus pH, hardness, iron, manganese, lead and copper once. Add uranium and radon in Lane County and the Cascade foothills, and test again after flooding, well work or a change in taste, color or smell. In the Southern Willamette Valley and Lower Umatilla Basin Groundwater Management Areas, nitrate is the test that matters most.

Free or low-cost testingAvailable

No statewide free program. The OSU Extension Well Water Program runs free nitrate screening clinics around the state and publishes testing guidance, and Oregon Health Authority's Domestic Well Safety Program (971-673-0440) helps owners read results. The Lower Umatilla Basin (Morrow and Umatilla counties) has state-funded free nitrate testing and water delivery for affected wells. Otherwise OHA puts bacteria and nitrate tests at about $20 to $40 each and arsenic at $25 to $45.

What the water is like in each part of Oregon

Oregon’s groundwater changes with the rock under it. Find your area below.

Region Typical household well What to expect
Willamette Valley and its foothills County medians of about 120 ft (Linn) to 260 ft (Washington) Alluvium and basalt give plentiful water, but the same sediments carry naturally occurring arsenic in a broad band from the Tualatin basin through Lane County. The sandy soils of the southern valley have leached farm nitrate into the shallow aquifer for decades, which is why the state drew a Groundwater Management Area there. Some aquifers carry sodium and boron, and Lane County and the Cascade foothills add uranium and radon from granitic rock.
Central Oregon high desert (Bend, Redmond, Prineville, Madras) Medians of 470 ft in Jefferson County and 400 ft in Crook, but 80 ft in Deschutes Young lava, with the water table deep beneath it in many places. Deep wells cost more to drill. Arsenic shows up in parts of the region.
Rogue Valley and the Klamath and Lake basins County medians of about 160 ft (Klamath and Lake) to 280 ft (Jackson) Volcanic rock with arsenic and, in places, boron.
North-central and eastern Oregon County medians of about 100 ft (Malheur) to 350 ft (Wasco) Columbia River basalts in much of the region. Nitrate from irrigated farming in the Lower Umatilla Basin is bad enough that the state delivers water to affected homes. Deep basalt wells can smell of hydrogen sulfide.

The coast is the shallow exception, with county medians of about 100 to 140 feet. Shallow sand wells there can bring iron and bacteria. Each county page below shows the typical depth of new domestic wells reported to OWRD since 2000.

What to test for

This follows the Oregon Health Authority’s testing advice, with OSU Extension’s free nitrate screening as a cheap first step.

Test How often Who needs it
Coliform and E. coli bacteria Every year Every well
Nitrate Every year Every well, and without fail in the Southern Willamette Valley, Lower Umatilla Basin and Northern Malheur Groundwater Management Areas
Arsenic Every 3 to 5 years Every well, most of all in the Willamette Valley, the Tualatin basin, Lane County, Klamath and Lake counties and parts of central Oregon
pH, hardness, iron, manganese, lead and copper Once Every well
Uranium and radon Once Lane County and the Cascade foothills
Arsenic, nitrate and total coliform When the property sells Every seller of a home with a domestic well
Arsenic follow-up Retest if the first result is over 8 ppb. With treatment, every year at the drinking faucet and every 3 years at the wellhead Wells with high arsenic
Bacteria and nitrate, more often When an infant drinks the water, someone has a stomach illness, the septic system failed or well equipment broke Homes in those situations, and wells with a history of contamination
Full retest After flooding, well work, or a change in taste, color or smell Every well

Why arsenic gets top billing: of 3,328 arsenic results homeowners reported to OHA through July 2020, about 9.7% were over the federal 10 ppb standard and about 2% were above 50 ppb. Nitrate is rarer statewide, about 1.6% of more than 25,115 tests over the limit, but it clusters: when the state sampled 107 wells in northern Malheur County in 1985, 34% were over. Neither one has a taste or smell. If a result comes back high, our arsenic guide, uranium guide and treatment planner walk you through the fixes.

ORELAP-accredited labs

You have a few ways to get tested in Oregon:

Option Best for Cost
An ORELAP lab, routine tests The yearly bacteria and nitrate check, and arsenic every few years About $20 to $40 each for bacteria and nitrate. Arsenic runs about $25 to $45
An ORELAP lab, real estate panel Selling a home (arsenic, nitrate and total coliform) Varies by lab
OSU Extension Well Water Program A first look at nitrate, at its clinics around the state Free
Lower Umatilla Basin program Wells in Morrow and Umatilla counties Free state-funded nitrate testing, plus water delivery for affected wells

There’s no statewide free program. Samples have to reach the lab within 24 hours of collection, so check the lab’s drop-off days before you fill the bottles. A real estate test is good for one year, so the same results can cover more than one offer. OHA’s Domestic Well Safety Program can help you read the results, and OSU’s Well Water Program answers questions at 541-713-5009.

ORELAP flags which drinking water labs accept samples from the public, and that list is what appears below: about 20 Oregon labs from Portland and Salem to Medford, Bend, Klamath Falls and Pendleton, most of which sell the real estate transaction panel and mail bottles anywhere in the state. Each profile shows which of the homeowner tests the lab is accredited for, checked one analyte at a time against the ORELAP search on September 30, 2026.

See all 20 certified labs in Oregon

OWRD-licensed well constructors

Three things to know before you hire in Oregon:

  • The state licenses the person, and requires a bond. Ask for the constructor’s license number.
  • There’s no separate pump installer license. Oregon licenses drillers only, so the constructor who builds the well usually sets the pump too.
  • The start card comes first. Your constructor should file it and pay the fee before drilling, and tag the well with its ID number.

Every profile below is built from OWRD’s license download of water supply constructors, grouped under the business each works for, with license numbers shown and helpers and trainees counted. Where OWRD’s well report archive has reports under the license or the bonded company name, the profile shows how many wells the business has filed since 2016, the counties it drills in and the typical depth of its new wells.

See all 162 licensed contractors in Oregon

By county

The share of residents on a well swings widely from county to county:

  • Very few: Multnomah (1%), Hood River (3%), Washington (4%) and Clatsop (5%) counties
  • About a sixth to a third: Lane (16%), Jackson (22%), Klamath (28%) and Linn (36%) counties. Clackamas has the most well users, about 56,200 people, 15% of its residents.
  • About half: Lake (50%), Crook (46%), Josephine (46%) and Malheur (45%) counties

Each county page carries its well population, the typical depth of new domestic wells reported to OWRD since 2000, the nearest accredited labs and the licensed constructors based there.

Oregon well water questions

Do I need a permit to drill a well in Oregon?

Not a permit as such, but your constructor must file a start card with OWRD and pay the fee before drilling, attach a well ID tag, and file the well report within 30 days. A landowner drilling their own well needs a Landowner’s Water Well Permit first. Counties may require a building or land use approval on top.

Is a water test required when I sell my house in Oregon?

Yes. Under the Domestic Well Testing Act the seller must have an ORELAP-accredited lab test the well for arsenic, nitrate and total coliform, give the results to the buyer and report them to the Oregon Health Authority within 90 days of closing. Springs, irrigation-only wells and wells on undeveloped land are exempt.

How often should I test my well in Oregon?

Every year for bacteria and nitrate, and every three to five years for arsenic, as the Oregon Health Authority recommends. Test more often if an infant drinks the water, and again after flooding, well work or a change in taste, color or smell.

How do I find the record for my well?

Search OWRD’s well log query by county and township, by owner name or by the well ID tag number. Reports go back decades and show the constructor, depth, casing, seal, yield and static water level.

Which lab should I use?

Any lab on the ORELAP list above that accepts public samples. For the yearly bacteria and nitrate check any of them will do. For arsenic, uranium, VOCs or PFAS, pick a lab accredited for that test.

My real estate test found arsenic. What now?

Arsenic above 10 parts per billion is common in the Willamette Valley and central Oregon and is treatable with a point-of-use reverse osmosis unit or a whole-house adsorption system. Retest after installation and every year after, and tell OHA’s Domestic Well Safety Program, which can walk you through the options.