Verified license

Rotary Drill Service, Inc.

NC · Catawba CountyWell drilling and pump installation

Call (828) 465-0132
Website
License status
Active
checked September 29, 2026
License number
2629
North Carolina record
Services
5
Geothermal and more
Counties served
1
on the state record

About Rotary Drill Service, Inc.

Rotary Drill Service, Inc. is a well drilling and pump installation contractor based in NC (Catawba County). The North Carolina licensing program lists license 2629 as active, and we last checked the record on September 29, 2026.

The state record covers geothermal, irrigation wells, pump installation, pump repair and well drilling. It lists 1 county where the business works, including Catawba County.

This profile is built from public state license records checked on September 29, 2026. Well Water Insider does not rate or endorse contractors. Own this business? Claim the profile to add photos, hours and a description.

License record

Verified against state records
License number
2629
License type
Well drilling and pump installation
Level / class
NC Level A
Status
Active
Last verified
September 29, 2026

Check this license yourself on the official North Carolina lookup.

What the state record says

NC certified individuals: David Walker (cert #2629, Level A, certified 9/13/1999). Endorsements: Well Construction, Environmental, Geothermal, Irrigation Well, Pump Install/Repair. Map position is the county center until an address is verified.

Services

What the North Carolina record says Rotary Drill Service, Inc. is licensed or registered to do.

Geothermal

Drilling closed-loop boreholes for ground-source heat pumps.

Irrigation Wells

Drilling and equipping wells for lawn, garden or farm irrigation.

Pump Installation

Setting a new submersible or jet pump with the pressure tank, switch and controls.

Pump Repair

Tracking down low pressure, short cycling or no water, then repairing or replacing parts of the pump system.

Well Drilling

Drilling a new private well, setting the casing and grouting it the way state rules require.

Service area

Based in Catawba County, North Carolina. The state record lists 1 county.

Approximate location (Catawba County)Counties on the state record

  • Catawba County

Well water in Catawba County

Useful context before you call a contractor here.

29%of households in Catawba County drink from a private well (est.)
Not statewidewater test when a home with a well is sold: no statewide rule in North Carolina
Open the Catawba County well guide

Typical costs for these services

National ranges to help you read a quote. They are not prices from Rotary Drill Service, Inc.; ask for a written estimate.

Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more

National 2026 ranges. Sources, checked September 2026: HomeGuide cost guides, Angi.

Certified labs nearby

Test your water before and after any work on the well.

Water Tech Laboratories, Inc.Granite Falls, NC · 13.1 miStatesville Analytical, Holdings, LLCStatesville, NC · 20.9 miPace Analytical Services- Huntersville NCHuntersville, NC · 29.5 mi
All labs near here

Before you hire

  1. 1

    Confirm the license

    Look up license 2629 on the North Carolina state lookup and make sure it is active for the work you need. Open the North Carolina lookup.

  2. 2

    Get a written estimate

    Ask for the scope, parts, depth or pump size, permit fees and warranty in writing. Compare two or three quotes for big jobs.

  3. 3

    Ask about permits and the well log

    New wells and many repairs are reported to the state. Ask who files the paperwork and for a copy of the well log.

  4. 4

    Test the water after the work

    Any work on a well can disturb bacteria. Test for coliform bacteria once the job is done.

Questions about Rotary Drill Service, Inc.

Is Rotary Drill Service, Inc. licensed?

Yes. The North Carolina record shows license 2629 (well drilling and pump installation) with the status "active", last checked on September 29, 2026. You can confirm it on the state lookup.

What services does Rotary Drill Service, Inc. offer?

The state record lists geothermal, irrigation wells, pump installation, pump repair and well drilling. Call to confirm they take on your type of job.

What areas does Rotary Drill Service, Inc. serve?

The business is based in Catawba County (NC). The state record lists 1 county, including Catawba County.

How do I contact Rotary Drill Service, Inc.?

Call (828) 465-0132 and visit their website. The address on the state record is NC.

Other licensed contractors near Catawba County

John F. Stone

Verified license

NC · Catawba County

License 3333 Active

  • Downhole Camera
  • Geothermal
  • Irrigation Wells
  • Pump Installation
  • Pump Repair
  • Well Abandonment
  • Well Drilling
  • Well Repair