Michigan county well guide

Well Water in Calhoun County, MI: Testing, Contractors and Rules

About 54,200 people in Calhoun County, 40% of residents, get their water from a private well. Nobody tests that water unless the owner does.

40%of residents on a private well
Share on private wells
Calhoun County40%
Michigan25%
8licensed contractors serve the county
24 mito the nearest certified lab that takes homeowner samples, Kalamazoo County HSD Laboratory
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.

About 54,200 people in Calhoun County, 40% of residents, rely on a private well, according to a 2010 U.S. Geological Survey estimate. That is well above the Michigan figure of 25%. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Calhoun County

In Calhoun County the local health department issues the well permit, inspects construction and requires a water sample before a new well goes into service, as Michigan's well code requires. Ask the same office whether the county runs a time-of-sale evaluation program, since several Michigan counties do.

At a glance

Water test for a new wellRequired

Michigan requires new wells to be tested at installation under the well construction code (Part 127 of the Public Health Code). Local health departments issue the permit and require the sample.

Water test when a home is soldNot required statewide

No statewide requirement, but several counties run time-of-sale or point-of-sale well and septic evaluation programs. Check the county page.

What the state recommends

EGLE recommends testing for coliform bacteria, nitrate and nitrite, fluoride, chloride, sulfate, sodium, hardness, and metals including arsenic, lead, iron, manganese, copper, uranium and others. Bacteria and nitrate yearly; a full chemistry panel every few years or when water changes.

Free or low-cost testingAvailable

Eight county health departments run their own onsite labs (Washtenaw, Oakland, Kalamazoo, Saginaw, Luce, Mackinac, Alger, Schoolcraft). Residents elsewhere can order a mail-in test through the EGLE Drinking Water Laboratory.

Getting your water tested near Calhoun County

For a homeowner test, start with Kalamazoo County HSD Laboratory in Kalamazoo (about 24 miles from the county's population center), the closest certified lab that accepts private well samples. The cards below list every certified lab within 40 miles and which tests each is certified for.

Licensed well contractors serving Calhoun County

8 licensed contractors list Calhoun County as a home base or service area, including Dudgeon Well Service, LLC and Katz Well Drilling Inc. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

Depth varies across Calhoun County. Logs of nearby wells, through the state well record search, are the best guide. Contaminants worth testing for in this part of Michigan include arsenic, nitrate, iron, and manganese. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • ArsenicSoutheast and thumb region
  • NitrateAgricultural areas
  • Iron
  • Manganese
  • Hardness
  • Coliform bacteria
  • PFAS near known sites

Neighboring counties: Branch County, Kalamazoo County, Barry County, Eaton County.

Typical well costs: Michigan lab fees and national price ranges

Bacteria test (coliform and E. coli)$23 to $25published Michigan lab fees
Nitrate test$25 to $41published Michigan lab fees
Broad panel (metals and minerals)$79published Michigan lab fees
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: EGLE state lab from October 1, 2026 ($23 bacteria, $41 nitrate and nitrite, partial chemistry $66 plus $13 prep) and district health department labs ($25 each). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: EGLE fee schedule effective 10/1/2026, Central Michigan District Health Department lab, HomeGuide cost guides, Angi: cost to shock a well.

Questions Calhoun County well owners ask

How many people in Calhoun County use a private well?

The U.S. Geological Survey estimates about 54,200 people, 40% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.

Where is the closest certified lab to Calhoun County?

Kalamazoo County HSD Laboratory in Kalamazoo, about 24 miles from the county's population center. It says it accepts samples from homeowners.

Do I need a permit to drill a well in Calhoun County?

Yes. The local health department issues the permit and inspects the well under the Michigan well construction code.

What does a well test cost near Calhoun County?

Published lab fees in Michigan: $23 to $25 for a bacteria test and $25 to $41 for nitrate (EGLE fee schedule effective 10/1/2026, Central Michigan District Health Department lab). Fees vary by lab, so ask when you order the kit.