North Carolina county well guide

Well Water in Gates County, NC: Testing, Contractors and Rules

About 2,700 people in Gates County, 22% of residents, get their water from a private well. Nobody tests that water unless the owner does.

22%of residents on a private well
Share on private wells
Gates County22%
North Carolina23%
28licensed contractors within 60 miles of the county
27 mito the nearest certified lab, Jla International, Inc.. Call first: it may not take homeowner samples
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.

About 2,700 people in Gates County, 22% of residents, rely on a private well, according to a 2010 U.S. Geological Survey estimate. That is close to the North Carolina figure of 23%. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Gates County

Gates County Environmental Health issues well permits and, under North Carolina law, every new well must be tested within 30 days of completion before it is used for drinking. The county office also collects samples for the State Laboratory for a set fee, which is usually the cheapest route for a routine test.

At a glance

Water test for a new wellRequired

Every newly constructed private well must be tested within 30 days of completion by the State Laboratory of Public Health or a certified lab before it is used for drinking water.

Water test when a home is soldNot required statewide

No statewide requirement at sale. Some lenders require a test.

What the state recommends

Every year: total and fecal coliform bacteria plus a wellhead inspection. Every 2 years: heavy metals, nitrate and nitrite, lead and copper. Every 5 years: pesticides and volatile organic compounds. Retest after repairs, flooding, a change in water quality, or when an infant or pregnant person is in the home.

Free or low-cost testingAvailable

County health departments collect samples and send them to the State Laboratory of Public Health at set fees that vary by county.

Getting your water tested near Gates County

1 certified lab is within 40 miles of Gates County, the closest being Jla International, Inc. in Edenton (about 27 miles from the county's population center). It does not list homeowner samples, so call first or use a mail-in kit from a state-certified lab.

Licensed well contractors serving Gates County

Only one licensed contractor lists Gates County as a home base or service area: West Water Well Drilling. To give you more choice, the list below shows the 28 licensed North Carolina contractors within 60 miles of the county, nearest first. Most drillers and pump installers travel well beyond their home county, so call and ask whether they cover your address.

Well depth and water chemistry

Depth varies across Gates County. Logs of nearby wells, through the state well record search, are the best guide. Contaminants worth testing for in this part of North Carolina include lead, arsenic, iron, and manganese. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Lead
  • Arsenic
  • Iron
  • Manganese
  • Low pHCorrosive water
  • Coliform bacteria
  • Radon

Neighboring counties: Hertford County, Chowan County, Perquimans County, Pasquotank County.

Typical well costs: North Carolina lab fees and national price ranges

Bacteria test (coliform and E. coli)$75published North Carolina lab fees
Nitrate test$75published North Carolina lab fees
Broad panel (metals and minerals)$175published North Carolina lab fees
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: County health departments set their own fees: $75 per kit in Moore County; $175 first-timer package in Wake County, plus a $50 trip fee if staff collect. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Moore County fee schedule, Wake County well water testing, HomeGuide cost guides, Angi: cost to shock a well.

Questions Gates County well owners ask

How many people in Gates County use a private well?

The U.S. Geological Survey estimates about 2,700 people, 22% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.

Where is the closest certified lab to Gates County?

Jla International, Inc. in Edenton, about 27 miles from the county's population center. Call first to ask whether they accept homeowner samples.

Do I need a permit to drill a well in Gates County?

Yes. County Environmental Health issues the permit, and the new well must be tested within 30 days of completion.

What does a well test cost near Gates County?

Published lab fees in North Carolina: $75 for a bacteria test and $75 for nitrate (Moore County fee schedule, Wake County well water testing). County-collected samples sent to the State Laboratory are often cheaper.