Pennsylvania county well guide

Well Water in Northampton County, PA: Testing, Contractors and Rules

About 37,100 people in Northampton County, 12% of residents, get their water from a private well. Nobody tests that water unless the owner does.

12%of residents on a private well
Share on private wells
Northampton County12%
Pennsylvania17%
81licensed contractors serve the county
38 mito the nearest certified lab that takes homeowner samples, SPL, Inc. Reading
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.

Most of Northampton County is on public water, but a 2010 U.S. Geological Survey estimate counts about 37,100 residents (12%) on private wells, below the Pennsylvania figure of 17%. If yours is one of them, testing and upkeep are up to you.

Local rules for wells in Northampton County

Pennsylvania sets no statewide construction or testing standard for private wells, so what applies in Northampton County depends on the county and the township. Some municipalities require a permit or a test at sale; many require nothing. Check with the township before drilling or selling, and treat the state guidance below as the floor.

At a glance

Water test for a new wellNot required statewide

Pennsylvania has no statewide private well construction standards or mandatory testing. DCNR licenses drillers but states that licensure does not require demonstrated knowledge of proper drilling. Some counties and townships (for example Chester County) have local well ordinances.

Water test when a home is soldNot required statewide

No statewide requirement. Some lenders require a water test; some townships require testing at transfer.

What the state recommends

DEP recommends testing every year for total coliform bacteria, nitrate, total dissolved solids and pH, plus additional tests for any suspected contaminant. Penn State Extension recommends a broader panel every 3 years (metals, hardness, chloride, sulfate) and testing after flooding, repairs or a change in taste, odor or color.

Free or low-cost testingAvailable

DEP regional offices sell low-cost bacteria test kits. Penn State Agricultural Analytical Services Lab offers mail-in drinking water kits at cost.

Getting your water tested near Northampton County

For a homeowner test, start with SPL, Inc. Reading in Reading (about 38 miles from the county's population center), the closest certified lab that accepts private well samples. The cards below list every certified lab within 40 miles and which tests each is certified for.

Licensed well contractors serving Northampton County

81 licensed contractors list Northampton County as a home base or service area, including Active Environmental Technologies, Inc and Ameridrill, Inc. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

Depth varies across Northampton County. Logs of nearby wells, through the state well record search, are the best guide. Contaminants worth testing for in this part of Pennsylvania include coliform bacteria, nitrate, iron, and manganese. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Coliform bacteria
  • Nitrate
  • Iron
  • Manganese
  • Hardness
  • Low pH
  • Radon
  • ArsenicSome regions
  • MethaneGas regions

Neighboring counties: Lehigh County, Monroe County, Carbon County, Bucks County.

Typical well costs: Pennsylvania lab fees and national price ranges

Bacteria test (coliform and E. coli)$40published Pennsylvania lab fees
Nitrate test$15published Pennsylvania lab fees
Broad panel (metals and minerals)$220published Pennsylvania lab fees
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: Penn State Agricultural Analytical Services Lab: $40 bacteria, $15 nitrate, $60 standard package, $220 extensive package. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Penn State drinking water testing, HomeGuide cost guides, Angi: cost to shock a well.

Questions Northampton County well owners ask

How many people in Northampton County use a private well?

The U.S. Geological Survey estimates about 37,100 people, 12% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.

Where is the closest certified lab to Northampton County?

SPL, Inc. Reading in Reading, about 38 miles from the county's population center. It says it accepts samples from homeowners.

Do I need a permit to drill a well in Northampton County?

Pennsylvania has no statewide permit, but some townships and counties require one. Ask the township office before work starts.

What does a well test cost near Northampton County?

Published lab fees in Pennsylvania: $40 for a bacteria test and $15 for nitrate (Penn State drinking water testing). Fees vary by lab, so ask when you order the kit.