Wisconsin county well guide

Well Water in Juneau County, WI: Testing, Contractors and Rules

About 15,200 people in Juneau County, 57% of residents, get their water from a private well. Nobody tests that water unless the owner does.

57%of residents on a private well
Share on private wells
Juneau County57%
Wisconsin27%
39licensed contractors serve the county
22 mito the nearest certified lab that takes homeowner samples, Pure Water Labs, LLC
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.

Juneau County is well country. A 2010 U.S. Geological Survey estimate puts about 15,200 people here, 57% of residents, on private wells, well above the Wisconsin figure of 27%. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Juneau County

Wisconsin's well code (NR 812) applies in Juneau County: a licensed well driller files a notification with the DNR before drilling, and the driller must sample the new well for bacteria and nitrate before it goes into service. There is no required test at sale, but any paid well inspection for a real-estate deal must be done by a licensed driller or pump installer and must include bacteria, nitrate and arsenic.

At a glance

Water test for a new wellRequired

Under NR 812 the well driller must collect a bacteria (coliform) and nitrate sample from every new well and report the results to DNR; the pump installer collects a bacteria sample after installing or replacing a pump. A well notification form and fee are filed with DNR before drilling.

Water test when a home is soldNot required statewide

No statewide requirement at sale. If a well is inspected for a real-estate transaction, only a licensed well driller or pump installer may perform the paid inspection, and the inspection must include bacteria, nitrate and arsenic tests.

What the state recommends

DNR and DHS recommend testing for coliform bacteria and nitrate every year, arsenic and lead at least every 5 years (arsenic yearly if it was found before or in Outagamie, Winnebago or Brown counties), fluoride once, and manganese, PFAS or radium where local conditions warrant. Test any time taste, color or odor changes or after flooding.

Free or low-cost testingAvailable

Some county health departments and UW Extension programs run subsidized nitrate and bacteria screening clinics; check the county health department. The DNR-certified lab list shows which labs accept homeowner samples.

Getting your water tested near Juneau County

For a homeowner test, start with Pure Water Labs, LLC in Reedsburg (about 22 miles from the county's population center), the closest certified lab that accepts private well samples. The cards below list every certified lab within 40 miles and which tests each is certified for.

Licensed well contractors serving Juneau County

39 licensed contractors list Juneau County as a home base or service area, including Adam Thompson and Adam W Ryberg. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

We have no county-level well records for Juneau County yet. Statewide, depth varies widely across the state; logs of nearby wells in the DNR Well Construction Reports database are the best guide. Contaminants worth testing for in this part of Wisconsin include coliform bacteria, nitrate, arsenic, and manganese. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Coliform bacteria
  • Nitrate
  • ArsenicNortheast Wisconsin around Winnebago and Outagamie counties, St. Peter sandstone
  • Manganese
  • Iron
  • Hardness
  • StrontiumEastern counties
  • RadiumEastern deep sandstone aquifer
  • PFASMarinette, Peshtigo, Dane County areas
  • Lead

Neighboring counties: Adams County, Monroe County, Sauk County, Marquette County.

Typical well costs: Wisconsin lab fees and national price ranges

Bacteria test (coliform and E. coli)$28 to $35published Wisconsin lab fees
Nitrate test$35 to $41published Wisconsin lab fees
Broad panel (metals and minerals)$450published Wisconsin lab fees
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: Wisconsin State Laboratory of Hygiene ($35 each, $450 homeowner package) and county labs (Marathon County: $28 bacteria, $41 nitrate, $61 for both). Free through WellTAP for eligible households. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Wisconsin State Laboratory of Hygiene prices, Marathon County water testing, HomeGuide cost guides, Angi: cost to shock a well.

Questions Juneau County well owners ask

How many people in Juneau County use a private well?

The U.S. Geological Survey estimates about 15,200 people, 57% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.

Where is the closest certified lab to Juneau County?

Pure Water Labs, LLC in Reedsburg, about 22 miles from the county's population center. It says it accepts samples from homeowners.

Do I need a permit to drill a well in Juneau County?

A well notification and fee must be filed with the Wisconsin DNR before drilling, and only a DNR-licensed well driller may drill it. Some counties add their own permit or setback review, so check with the county land conservation or zoning office.

What does a well test cost near Juneau County?

Published lab fees in Wisconsin: $28 to $35 for a bacteria test and $35 to $41 for nitrate (Wisconsin State Laboratory of Hygiene prices, Marathon County water testing). Several county health departments and the state lab of hygiene sell homeowner kits for bacteria and nitrate at low cost; ask the county about screening clinics.