Eden Laboratory, Inc
- Arsenic
- Hardness
- Iron and Manganese
- Lead
- Nitrate / Nitrite
About 1,940 households in Schenectady County, 3% of the county, rely on a private well. Nobody tests that water unless the owner does.
Wells are the exception in Schenectady County: about 1,940 households, under 3% of the county, are on a private well. Being in the minority means less local help, so this page gathers what applies.
The rules that apply in Schenectady County are set at the state level in New York. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.
No single statewide rule. The driller must be DEC-registered, file a preliminary notice before drilling, disinfect the finished well under NYSDOH Appendix 5-B, and send a well completion report to DEC and to you within 30 days. NYSDOH says a new well should be tested before use for coliform bacteria, nitrate, nitrite, arsenic, lead, iron, manganese, sodium, hardness, pH and turbidity. Many county health departments (Westchester, Rockland, Putnam, Dutchess, Suffolk and others) require a permit and a passing water test before a new well can be used.
No statewide requirement. A few counties and towns require a well test or well inspection when a property changes hands, and FHA, VA and USDA loans usually ask for a bacteria and nitrate test. Check with the county health department.
NYSDOH recommends a coliform bacteria test every year, plus a first-time panel of nitrate, nitrite, arsenic, lead, iron, manganese, sodium, sulfate, hardness, pH, alkalinity and turbidity, then periodic re-testing of whatever showed up. Add radon, uranium, methane or PFAS where they are known in your area.
No statewide free program. Several county health departments run their own ELAP-certified labs and sell low-cost bacteria and nitrate tests (Erie, Monroe, Suffolk, Nassau, Cattaraugus, Chautauqua, Allegany). Others keep a list of local certified labs.
The nearest certified lab is Eden Laboratory, Inc in Schenectady, about 3 miles from the county center. There are 5 more within 40 miles, listed below with what each tests for.
6 certified labs within 40 miles
Licensed help in Schenectady County includes AAA Pump Sales and Service and Artesian Water Wells and 3 others. Every listing was matched to the New York license list; the "verify" link on each profile opens the state lookup.
5 licensed contractors
License NYRD10599 Active
License NYRD10253 Active
License NYRD10580 Active
License NYRD10027 Active
License NYRD11125 Active
Well depth and water chemistry in Schenectady County follow the rock underneath it. Typical wells here run 100 to 400 ft in bedrock across most of upstate; 30 to 150 ft in glacial sand and gravel valleys and on Long Island feet. Contaminants worth testing for in this part of New York include coliform bacteria, nitrate (farm valleys and older septic areas), arsenic (parts of central and western new york), iron and manganese.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Albany County, Saratoga County, Rensselaer County, Montgomery County.
National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.
About 1,940, or 3% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.
Eden Laboratory, Inc in Schenectady, about 3 miles away. Call first to ask whether they accept homeowner samples.
No single statewide rule. The driller must be DEC-registered, file a preliminary notice before drilling, disinfect the finished well under NYSDOH Appendix 5-B, and send a well completion report to DEC and to you within 30 days. NYSDOH says a new well should be tested before use for coliform bacteria, nitrate, nitrite, arsenic, lead, iron, manganese, sodium, hardness, pH and turbidity. Many county health departments (Westchester, Rockland, Putnam, Dutchess, Suffolk and others) require a permit and a passing water test before a new well can be used.
A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. Mail-in kits cost about the same as walking in.