Verified license

Moore’s Pump & Supply

Clyde, TX · Callahan CountyWell drilling and pump installation

Call (915) 893-5100
License status
Active
checked September 29, 2026
License number
1921
Texas record
Services
6
Geothermal and more
Counties served
1
on the state record

About Moore’s Pump & Supply

Moore’s Pump & Supply is a well drilling and pump installation contractor based in Clyde, TX (Callahan County). The Texas licensing program lists license 1921 as active, and we last checked the record on September 29, 2026.

The state record covers geothermal, pump installation, pump repair, well abandonment, well drilling and well repair. It lists 1 county where the business works, including Callahan County.

This profile is built from public state license records checked on September 29, 2026. Well Water Insider does not rate or endorse contractors. Own this business? Claim the profile to add photos, hours and a description.

License record

Verified against state records
License number
1921
License type
Well drilling and pump installation
Status
Active
Expires
July 13, 2028
Last verified
September 29, 2026

Check this license yourself on the official Texas lookup.

What the state record says

Track record

Filed 4 well reports with the Texas Water Development Board since 2016 (3 for household wells), most recently in July 2016, mostly in Callahan County.

License details

  • Licensed by the Texas Department of Licensing and Regulation
  • TDLR) as a water well driller and pump installer (drilling endorsements: water wells, monitoring wells, closed-loop geothermal wells
  • Pump endorsements: windmills, hand pumps and pump jacks, single-phase pumps, three-phase pumps, line-shaft turbine pumps
  • License 1921 held by Harold Dean Moore, expires 2028-07-13.

Services

What the Texas record says Moore’s Pump & Supply is licensed or registered to do.

Geothermal

Drilling closed-loop boreholes for ground-source heat pumps.

Pump Installation

Setting a new submersible or jet pump with the pressure tank, switch and controls.

Pump Repair

Tracking down low pressure, short cycling or no water, then repairing or replacing parts of the pump system.

Well Abandonment

Sealing an unused well to state standards so it cannot carry surface water down into the aquifer.

Well Drilling

Drilling a new private well, setting the casing and grouting it the way state rules require.

Well Repair

Fixing casings, caps, pitless adapters and other parts of an existing well.

Want to compare more than one quote?

Send one free request and hear back from up to 3 licensed well contractors near Clyde.

Service area

Based in Callahan County, Texas. The state record lists 1 county.

Business addressCounties on the state record

  • Callahan County

Well water in Callahan County

Useful context before you call a contractor here.

People on wells41%of residents in Callahan County, about 5,500 people (USGS estimate, 2010)
Test at home saleNot requiredNo statewide rule in Texas.
Open the Callahan County well guide

Typical costs for these services

National ranges to help you read a quote. They are not prices from Moore’s Pump & Supply; ask for a written estimate.

Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself
National 2026 ranges. Sources, checked September 2026: HomeGuide cost guides and Angi.

Certified labs nearby

Test your water before and after any work on the well.

All labs near here

Before you hire

  1. 1

    Confirm the license

    Look up license 1921 on the Texas state lookup and make sure it is active for the work you need. Open the Texas lookup.

  2. 2

    Get a written estimate

    Ask for the scope, parts, depth or pump size, permit fees and warranty in writing. Compare two or three quotes for big jobs.

  3. 3

    Ask about permits and the well log

    New wells and many repairs are reported to the state. Ask who files the paperwork and for a copy of the well log.

  4. 4

    Test the water after the work

    Any work on a well can disturb bacteria. Test for coliform bacteria once the job is done.

Questions about Moore’s Pump & Supply

Is Moore’s Pump & Supply licensed?

Yes. The Texas record shows license 1921 (well drilling and pump installation) with the status "active", last checked on September 29, 2026. You can confirm it on the state lookup.

What services does Moore’s Pump & Supply offer?

The state record lists geothermal, pump installation, pump repair, well abandonment, well drilling and well repair. Call to confirm they take on your type of job.

What areas does Moore’s Pump & Supply serve?

The business is based in Callahan County (Clyde, TX). The state record lists 1 county, including Callahan County.

How do I contact Moore’s Pump & Supply?

Call (915) 893-5100. The address on the state record is 8559 CR 262, Clyde, TX 79510.

Other licensed contractors near Clyde

Free quotes

Get quotes from licensed local pros

Your request goes to Well Water Insider’s network of licensed well contractors near you, not to Moore’s Pump & Supply. To contact Moore’s Pump & Supply directly, call (915) 893-5100.

Free, with no obligation. See our Privacy Policy and Terms.