Verified license

M & S Drilling Co., Inc.

Snyder, TX · Scurry CountyWell drilling and pump installation

Call (325) 573-8951
License status
Active
checked September 29, 2026
License number
1947
Texas record
Services
6
Geothermal and more
Counties served
2
on the state record

About M & S Drilling Co., Inc.

M & S Drilling Co., Inc. is a well drilling and pump installation contractor based in Snyder, TX (Scurry County). The Texas licensing program lists license 1947 as active, and we last checked the record on September 29, 2026.

The state record covers geothermal, pump installation, pump repair, well abandonment, well drilling and well repair. It lists 2 counties where the business works, including Mitchell County and Scurry County.

This profile is built from public state license records checked on September 29, 2026. Well Water Insider does not rate or endorse contractors. Own this business? Claim the profile to add photos, hours and a description.

License record

Verified against state records
License number
1947
License type
Well drilling and pump installation
Status
Active
Expires
May 30, 2028
Last verified
September 29, 2026

Check this license yourself on the official Texas lookup.

What the state record says

Track record

Filed 3 well reports with the Texas Water Development Board since 2016 (2 for household wells), most recently in October 2024, mostly in Mitchell and Scurry counties.

License details

  • Licensed by the Texas Department of Licensing and Regulation
  • TDLR) as a water well driller and pump installer (drilling endorsements: water wells, monitoring wells, closed-loop geothermal wells
  • Pump endorsements: windmills, hand pumps and pump jacks, single-phase pumps, three-phase pumps
  • License 1947 held by Marvin Ray Sorrells JR, expires 2028-05-30.

Services

What the Texas record says M & S Drilling Co., Inc. is licensed or registered to do.

Geothermal

Drilling closed-loop boreholes for ground-source heat pumps.

Pump Installation

Setting a new submersible or jet pump with the pressure tank, switch and controls.

Pump Repair

Tracking down low pressure, short cycling or no water, then repairing or replacing parts of the pump system.

Well Abandonment

Sealing an unused well to state standards so it cannot carry surface water down into the aquifer.

Well Drilling

Drilling a new private well, setting the casing and grouting it the way state rules require.

Well Repair

Fixing casings, caps, pitless adapters and other parts of an existing well.

Want to compare more than one quote?

Send one free request and hear back from up to 3 licensed well contractors near Snyder.

Service area

Based in Scurry County, Texas. The state record lists 2 counties.

Business addressCounties on the state record

  • Mitchell County
  • Scurry County

Well water in Scurry County

Useful context before you call a contractor here.

People on wells30%of residents in Scurry County, about 5,000 people (USGS estimate, 2010)
Test at home saleNot requiredNo statewide rule in Texas.
Open the Scurry County well guide

Typical costs for these services

National ranges to help you read a quote. They are not prices from M & S Drilling Co., Inc.; ask for a written estimate.

Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself
National 2026 ranges. Sources, checked September 2026: HomeGuide cost guides and Angi.

Certified labs nearby

Test your water before and after any work on the well.

All labs near here

Before you hire

  1. 1

    Confirm the license

    Look up license 1947 on the Texas state lookup and make sure it is active for the work you need. Open the Texas lookup.

  2. 2

    Get a written estimate

    Ask for the scope, parts, depth or pump size, permit fees and warranty in writing. Compare two or three quotes for big jobs.

  3. 3

    Ask about permits and the well log

    New wells and many repairs are reported to the state. Ask who files the paperwork and for a copy of the well log.

  4. 4

    Test the water after the work

    Any work on a well can disturb bacteria. Test for coliform bacteria once the job is done.

Questions about M & S Drilling Co., Inc.

Is M & S Drilling Co., Inc. licensed?

Yes. The Texas record shows license 1947 (well drilling and pump installation) with the status "active", last checked on September 29, 2026. You can confirm it on the state lookup.

What services does M & S Drilling Co., Inc. offer?

The state record lists geothermal, pump installation, pump repair, well abandonment, well drilling and well repair. Call to confirm they take on your type of job.

What areas does M & S Drilling Co., Inc. serve?

The business is based in Scurry County (Snyder, TX). The state record lists 2 counties, including Mitchell County and Scurry County.

How do I contact M & S Drilling Co., Inc.?

Call (325) 573-8951. The address on the state record is 10605 BLOCK LINE RD, Snyder, TX 79549.

Other licensed contractors near Snyder

Free quotes

Get quotes from licensed local pros

Your request goes to Well Water Insider’s network of licensed well contractors near you, not to M & S Drilling Co., Inc. To contact M & S Drilling Co., Inc directly, call (325) 573-8951.

Free, with no obligation. See our Privacy Policy and Terms.