Verified license

Choate Well Service

Big Spring, TX · Howard CountyWell drilling and pump installation

Call (915) 393-5231
License status
Active
checked September 29, 2026
License number
2568
Texas record
Services
6
Geothermal and more
Counties served
8
on the state record

About Choate Well Service

Choate Well Service is a well drilling and pump installation contractor based in Big Spring, TX (Howard County). The Texas licensing program lists license 2568 as active, and we last checked the record on September 29, 2026.

The state record covers geothermal, pump installation, pump repair, well abandonment, well drilling and well repair. It lists 8 counties where the business works, including Howard County, Glasscock County and Martin County.

This profile is built from public state license records checked on September 29, 2026. Well Water Insider does not rate or endorse contractors. Own this business? Claim the profile to add photos, hours and a description.

License record

Verified against state records
License number
2568
License type
Well drilling and pump installation
Status
Active
Expires
December 7, 2026
Last verified
September 29, 2026

Check this license yourself on the official Texas lookup.

What the state record says

Track record

Filed 299 well reports with the Texas Water Development Board since 2016 (108 for household wells), most recently in September 2026, mostly in Howard, Glasscock and Martin counties.

License details

  • Licensed by the Texas Department of Licensing and Regulation
  • TDLR) as a water well driller and pump installer (drilling endorsements: water wells, monitoring wells, closed-loop geothermal wells
  • Pump endorsements: windmills, hand pumps and pump jacks, single-phase pumps, three-phase pumps, line-shaft turbine pumps
  • License 2568 held by John M Choate, expires 2026-12-07.

Services

What the Texas record says Choate Well Service is licensed or registered to do.

Geothermal

Drilling closed-loop boreholes for ground-source heat pumps.

Pump Installation

Setting a new submersible or jet pump with the pressure tank, switch and controls.

Pump Repair

Tracking down low pressure, short cycling or no water, then repairing or replacing parts of the pump system.

Well Abandonment

Sealing an unused well to state standards so it cannot carry surface water down into the aquifer.

Well Drilling

Drilling a new private well, setting the casing and grouting it the way state rules require.

Well Repair

Fixing casings, caps, pitless adapters and other parts of an existing well.

Want to compare more than one quote?

Send one free request and hear back from up to 3 licensed well contractors near Big Spring.

Service area

Based in Howard County, Texas. The state record lists 8 counties.

Business addressCounties on the state record

  • Howard County
  • Glasscock County
  • Martin County
  • Midland County
  • Borden County
  • Mitchell County
  • Ector County
  • Fisher County

Well water in Howard County

Useful context before you call a contractor here.

People on wells13%of residents in Howard County, about 4,600 people (USGS estimate, 2010)
Test at home saleNot requiredNo statewide rule in Texas.
Open the Howard County well guide

Typical costs for these services

National ranges to help you read a quote. They are not prices from Choate Well Service; ask for a written estimate.

Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself
National 2026 ranges. Sources, checked September 2026: HomeGuide cost guides and Angi.

Certified labs nearby

Test your water before and after any work on the well.

All labs near here

Before you hire

  1. 1

    Confirm the license

    Look up license 2568 on the Texas state lookup and make sure it is active for the work you need. Open the Texas lookup.

  2. 2

    Get a written estimate

    Ask for the scope, parts, depth or pump size, permit fees and warranty in writing. Compare two or three quotes for big jobs.

  3. 3

    Ask about permits and the well log

    New wells and many repairs are reported to the state. Ask who files the paperwork and for a copy of the well log.

  4. 4

    Test the water after the work

    Any work on a well can disturb bacteria. Test for coliform bacteria once the job is done.

Questions about Choate Well Service

Is Choate Well Service licensed?

Yes. The Texas record shows license 2568 (well drilling and pump installation) with the status "active", last checked on September 29, 2026. You can confirm it on the state lookup.

What services does Choate Well Service offer?

The state record lists geothermal, pump installation, pump repair, well abandonment, well drilling and well repair. Call to confirm they take on your type of job.

What areas does Choate Well Service serve?

The business is based in Howard County (Big Spring, TX). The state record lists 8 counties, including Howard County, Glasscock County, Martin County, Midland County and Borden County.

How do I contact Choate Well Service?

Call (915) 393-5231. The address on the state record is 8500 E Moss Lake rd, Big Spring, TX 79720.

Other licensed contractors near Big Spring

Free quotes

Get quotes from licensed local pros

Your request goes to Well Water Insider’s network of licensed well contractors near you, not to Choate Well Service. To contact Choate Well Service directly, call (915) 393-5231.

Free, with no obligation. See our Privacy Policy and Terms.