Private well guide

Well Water in California: Testing, Rules, Labs and Licensed Contractors

About 1,384,000 people in California get their water from a private well, by the U.S. Geological Survey's estimate. Here is what the state requires, where to get it tested, and who is licensed to work on it.

716Licensed contractorschecked against state records
101Certified labsfrom the state certified list
58Counties covered
1,384,000People on private wells4% of residents (USGS, 2010)

The short version: About 1.4 million Californians, 4% of residents, drink from a private well (USGS estimate, 2010). Most of them live in the foothills, the Central Valley and the far north. California leaves the well itself to the county and the water to you. It also keeps a public record anyone can read: completion reports for more than a million wells.

California at a glance
Permit to drill a home well Yes, from your county environmental health department (or the city or water district that holds the well ordinance)
Who can drill it A contractor with a C-57 Well Drilling license from the Contractors State License Board
Water test for a new well Not required statewide. Check your county’s well ordinance for any sample it wants before sign-off
Water test when a home sells Not required statewide (a few counties and cities, Santa Cruz County among them, require a well inspection or test at transfer)
Most common problem Nitrate in the farm valleys, with arsenic, uranium and 1,2,3-TCP close behind in the San Joaquin Valley
Typical household well depth County medians from about 60 feet in Del Norte County to 540 feet in San Diego County (DWR records)
Where to test A lab accredited by the State Water Board’s ELAP, or your county public health lab for bacteria

Who is in charge of a California well

The state sets the standard and the county enforces it. Here’s who does what:

Agency What it handles
County environmental health department (or a city or water district with a well ordinance) The permitting agency under the Water Code. Issues the permit and inspects the seal. Its well ordinance sets any water sample it wants before it closes the file
Department of Water Resources (DWR) Writes the California Well Standards in DWR Bulletin 74 and keeps the Well Completion Reports, which are public
Contractors State License Board (CSLB) Issues the C-57 Well Drilling license, which also covers pump work
State Water Resources Control Board Accredits the labs through ELAP and runs the nitrate and safe-water programs in the valleys

The driller must send a Well Completion Report to DWR within 60 days. Those reports are public, so the depth, casing, seal, yield and geology of your well are probably online already.

What is required, and what is left to you

California regulates how a well is built. Before and after a home well goes in:

  • Get a county permit. Your county environmental health department issues it, and your C-57 contractor normally pulls it.
  • Use a licensed driller. The contractor must hold a C-57 Well Drilling license.
  • Build to Bulletin 74. The California Well Standards cover the annular seal, setbacks from septic systems and property lines, and disinfection.
  • File the completion report. The driller sends it to DWR within 60 days.

After that, nothing. California does not require a test of private well water when the well is new, when the house is sold or at any time in between, apart from any sample your county’s well ordinance asks for at completion. The State Water Board’s advice is a test every year. Bacteria and nitrate are the minimum. In the valleys and foothills, a first test should add arsenic, uranium, chromium and 1,2,3-TCP, because those are the contaminants that have forced whole towns onto bottled water. Here’s where the state stands:

At a glance

Water test for a new wellNot required statewide

No statewide water test. State law (Water Code 13801) makes the county the permitting agency: you need a well permit from the county environmental health department before drilling, the well must be built to the California Well Standards in DWR Bulletin 74 (annular seal, setbacks from septic systems and property lines, disinfection) by a C-57 licensed contractor, and the driller files a Well Completion Report with the Department of Water Resources within 60 days. Check your county's well ordinance for any water sample it wants before it signs off the permit.

Water test when a home is soldNot required statewide

No statewide requirement. The Transfer Disclosure Statement only says whether the property is on a well. Some lenders require a water test before closing, and a handful of counties and cities (Santa Cruz County among them) require a well inspection or test at transfer.

What the state recommends

The State Water Board recommends testing a domestic well every year. Bacteria and nitrate are the yearly minimum; a first test should add arsenic, uranium, hexavalent and total chromium, 1,2,3-TCP, fluoride, hardness, iron, manganese, sodium, boron and total dissolved solids, with perchlorate and PFAS where the county or a nearby public system has found them. Test again after a flood, a wildfire, well work or a change in taste, color or smell, and check the level in dry years.

Free or low-cost testingAvailable

In the San Joaquin and Sacramento valleys the nitrate management zones set up under the Central Valley Water Board's Nitrate Control Program test private wells for free and supply bottled water where nitrate is over the limit: the Valley Water Collaborative covers the Modesto, Turlock, Eastern San Joaquin, Delta-Mendota, Merced, Madera and Yolo basins ((209) 750-3867), and the Kings, Kaweah, Tule and Chowchilla zones run similar programs through Self-Help Enterprises. Several counties (Santa Clara Valley Water and Sonoma County among them) run free or reduced-cost domestic well testing days. Elsewhere, county public health labs run a bacteria test for roughly $30 to $60.

What the water is like in each part of California

California’s groundwater is as varied as its geology. Find your region below.

Region Typical household well What to expect
North Coast and Sacramento Valley County medians about 60 to 280 ft Gentler than the rest of the state. Wells are shallow, and iron and manganese are the usual complaints, in the Delta and coastal alluvium too. Shallow coastal wells near septic systems are the ones most likely to fail for bacteria.
Sierra foothills and northern San Joaquin Valley County medians about 230 to 480 ft Clean, often soft water from fractured granite in the foothills, but uranium and radon come with the granite, and yields drop in dry years.
Southern San Joaquin Valley County medians about 280 to 460 ft A hard place to own a well. Nitrate from a century of farming, arsenic in the Tulare Lake basin and along the west side, uranium in the sediments washed out of the Sierra, and 1,2,3-TCP and DBCP left over from soil fumigants.
Central Coast ranges, Southern California and the deserts County medians about 440 to 540 ft in Monterey, San Luis Obispo, Santa Barbara and San Diego counties The Coast Ranges run hard and salty. The deserts add fluoride, boron and arsenic. The Inland Empire has perchlorate and hexavalent chromium plumes, and hexavalent chromium shows up in the Coachella Valley too.

Those ranges come from county medians of domestic Well Completion Reports filed with DWR since 2000. Each county page below shows its own range.

Every one of these problems shows up in a first-time broad test, which is why the state pushes for one.

What to test for

This follows the State Water Board’s guide for private domestic well owners.

Test How often Who needs it
Total coliform bacteria, nitrate and electrical conductivity (a quick read on total dissolved solids) Every year Every well
E. coli Whenever total coliform shows up Every well
A broad first test: arsenic, uranium, hexavalent and total chromium, 1,2,3-TCP, fluoride, hardness, iron, manganese, sodium, boron and total dissolved solids Once, the first time you test Every new well, and any well you just bought, especially in the valleys and foothills
Trace metals (arsenic, lead, manganese) and general minerals Every 5 to 10 years Every well
Perchlorate and PFAS With the first test Where the county or a nearby public system has found them
VOCs, metals and petroleum hydrocarbons With the first test Wells near landfills, industry, dry cleaners, gas stations or auto repair shops
Pesticides With the first test Wells near farms or livestock
Full retest After a flood, a wildfire, well work, a big change in conductivity or nearby land use, or a change in taste, color or smell Every well

Why nitrate gets top billing: when the State Water Board sampled 181 private wells in Tulare County in 2006, 40% were over the nitrate limit. Total coliform showed up in 33% of those wells too. If your results come back high, our arsenic guide, uranium guide and treatment planner walk you through the fixes. In dry years, check the water level too.

ELAP-accredited labs and county public health labs

You have three ways to get tested in California:

Option Best for Cost
County public health lab The yearly bacteria test, and often nitrate too Roughly $30 to $60 for bacteria
ELAP-accredited commercial lab The arsenic, uranium, chromium and TCP panel, and anything a lender asks for About $100 to $400 for basic testing, depending on how many tests you add
Free nitrate programs in the Central Valley Domestic wells in the nitrate management zones Free, with bottled water where nitrate is over the limit

California accredits environmental labs through the Environmental Laboratory Accreditation Program, and each lab’s certificate lists exactly which drinking water tests it may run. Ask for a written estimate before you sample. The State Water Board’s guide puts bacteria at about $30 to $70, nitrate at $25 to $60 and a VOC package at $150 to $350.

In the San Joaquin and Sacramento valleys, the nitrate management zones set up under the Central Valley Water Board’s Nitrate Control Program test private wells for free. The Valley Water Collaborative covers the Modesto, Turlock, Eastern San Joaquin, Delta-Mendota, Merced, Madera and Yolo basins ((209) 750-3867), and the Kings, Kaweah, Tule and Chowchilla zones run similar programs through Self-Help Enterprises. Several counties, Santa Clara Valley Water and Sonoma County among them, run free or reduced-cost testing days.

The labs below hold current ELAP accreditation for at least the tests a well owner needs. The commercial labs handle the full panel, and most will mail bottles anywhere in the state.

See all 101 certified labs in California

C-57 licensed well drillers

Three things to know before you hire in California:

  • One license covers the whole job. The C-57 Well Drilling license covers drilling, pump installation and repair, and well destruction.
  • The county permit comes first. Your contractor normally pulls it from county environmental health before drilling.
  • Look at the track record. DWR publishes every Well Completion Report with the driller’s license number, so you can see who actually drills near you.

Every contractor below holds an active C-57 license, checked against the Contractors State License Board list. Each profile also shows how many wells the company has reported to DWR since 2016, how many were domestic supply, and which counties it works in, which is the most reliable guide to who is actually drilling near you.

See all 716 licensed contractors in California

By county

Well use runs from almost nobody to most of the county’s residents:

  • Almost nobody: under 1% of residents in Los Angeles, Orange, San Francisco, San Mateo and Alameda counties
  • About one in six: Tulare (15%), Sonoma (15%), Shasta (16%) and Merced (16%) counties
  • About half or more: Tehama (49%), Lassen (56%) and Mariposa (66%)

Each county page carries its well population, the typical depth of domestic wells drilled there since 2000, the nearest accredited labs and the licensed drillers based there.

California well water questions

Do I need a permit to drill a well in California?

Yes, from your county environmental health department, or the city or water district that holds the well ordinance where you live. The permit sets the construction standard, the setbacks and any water test the county wants before it signs off. Your C-57 contractor normally pulls it.

Is a water test required when I sell my house in California?

Not statewide. The Transfer Disclosure Statement only says whether the property is on a well. Some lenders require a water test before closing, and a few counties and cities require a well inspection at transfer, so ask your county.

How often should I test my well in California?

Every year for total coliform bacteria, nitrate and electrical conductivity, as the State Water Board recommends. Test metals and minerals every 5 to 10 years, and run a broad first test that includes arsenic, uranium, chromium and 1,2,3-TCP. Retest after a flood, a wildfire, well work or any change in the water.

How do I find the record for my well?

Search the DWR Well Completion Report dataset on the state open data portal by county, city or address, or use the Online System for Well Completion Reports map. Wells drilled since the late 1980s are almost always there, and older ones often are.

Can I get my well tested for free?

In the Central Valley nitrate management zones, yes. The Valley Water Collaborative and the Kings, Kaweah, Tule and Chowchilla programs test domestic wells at no charge and provide bottled water where nitrate is over the limit. Some counties and water districts run free testing days. Everywhere else, a county public health lab bacteria test is the cheapest option.

Which lab should I use?

Any lab on the ELAP list whose accreditation covers the test you need. Use a county public health lab for the yearly bacteria check and a commercial lab for the metals, uranium, chromium and TCP panel.