California county well guide

Well Water in Kern County, CA: Testing, Contractors and Rules

About 9,078 households in Kern County, 3% of the county, rely on a private well. Nobody tests that water unless the owner does.

Labs within 40 milesLicensed contractors
3%of households on a private well
Share on wells, county vs state
Kern County3%
California average4%
81licensed contractors serve the county
7 mito the nearest certified lab, Pace Analytical Services, LLC dba BC Laboratories, Inc.
Nostatewide test required when a home is sold

Most of Kern County is on public water, but an estimated 9,078 households still rely on a private well. This page covers the rules, labs and licensed contractors that serve them.

Local rules for wells in Kern County

Private wells in Kern County follow California's statewide rules, administered by County environmental health departments issue well permits and enforce the state well standards. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though lenders often ask for one. The cards below show the details and the official sources.

At a glance

Water test for a new wellNot required statewide

No statewide water test. State law (Water Code 13801) makes the county the permitting agency: you need a well permit from the county environmental health department before drilling, the well must be built to the California Well Standards in DWR Bulletin 74 (annular seal, setbacks from septic systems and property lines, disinfection) by a C-57 licensed contractor, and the driller files a Well Completion Report with the Department of Water Resources within 60 days. Most counties require a bacteriological sample, and some add nitrate, before they sign off the permit, so check your county's well ordinance.

Water test when a home is soldNot required statewide

No statewide requirement. The Transfer Disclosure Statement only says whether the property is on a well. FHA, VA and USDA loans normally require a bacteria, nitrate and lead sample from an accredited lab before closing, and a handful of counties and cities (Santa Cruz County among them) require a well inspection or test at transfer.

What the state recommends

The State Water Board recommends testing a domestic well every year. Bacteria and nitrate are the yearly minimum; a first test should add arsenic, uranium, hexavalent and total chromium, 1,2,3-TCP, fluoride, hardness, iron, manganese, sodium, boron and total dissolved solids, with perchlorate and PFAS where the county or a nearby public system has found them. Test again after a flood, a wildfire, well work or a change in taste, color or smell, and check the level in dry years.

Free or low-cost testingAvailable

In the San Joaquin and Sacramento valleys the nitrate management zones set up under the Central Valley Water Board's Nitrate Control Program test private wells for free and supply bottled water where nitrate is over the limit: the Valley Water Collaborative covers the Modesto, Turlock, Eastern San Joaquin, Delta-Mendota, Merced, Madera and Yolo basins ((209) 750-3867), and the Kings, Kaweah, Tule and Chowchilla zones run similar programs through Self-Help Enterprises. Several counties (Santa Clara Valley Water and Sonoma County among them) run free or reduced-cost domestic well testing days. Elsewhere, county public health labs run a bacteria test for roughly $30 to $60.

Getting your water tested near Kern County

3 certified labs within 40 miles serve Kern County, starting with Pace Analytical Services, LLC dba BC Laboratories, Inc. in Bakersfield (about 7 miles from the county center). Each card below shows whether the lab takes homeowner samples and which tests it is certified for.

3 certified labs within 40 miles

Licensed well contractors serving Kern County

81 licensed contractors serve Kern County, including A – 1 Drilling & Pump Inc and A Z C A Drilling & Pump Inc. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

Wells in Kern County typically reach 300 to 500 feet; the median of 2,240 domestic wells reported to DWR since 2000 is 400 feet. What comes up with the water depends on the aquifer, and across California the usual suspects are nitrate (san joaquin valley, salinas valley, dairy and orchard country), arsenic (tulare lake basin. A first full panel tells you which of them apply to your well.

Typical well depth

300 to 500 feet; the median of 2,240 domestic wells reported to DWR since 2000 is 400 feet

Contaminants to test for
  • Nitrate (San Joaquin Valley
  • Salinas Valley
  • Dairy and orchard country)
  • Arsenic (Tulare Lake basin
  • Western San Joaquin Valley
  • The deserts)
  • Uranium (eastern San Joaquin Valley
  • Sierra foothill granite)
  • Hexavalent chromium (Coachella Valley
  • Parts of the Central Valley)
  • 1
  • 2
  • 3-TCP and DBCP (former fumigated farmland in the Central Valley)
  • Coliform bacteria (shallow foothill and coastal wells near septic systems)
  • Hardness and total dissolved solids (Coast Ranges
  • Desert basins)
  • Iron and manganese (Delta
  • Coastal alluvium)
  • Fluoride and boron (Kern
  • Imperial
  • Desert basins)
  • Perchlorate (Inland Empire)
  • PFAS near airfields and industrial areas

Neighboring counties: Tulare County, Kings County, Ventura County, Santa Barbara County.

What well work costs in Kern County

Bacteria test (coliform and E. coli)$38 to $61published California lab fees
Nitrate test$66published California lab fees
Broad panel (metals and minerals)$445published California lab fees
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Sonoma County Public Health Lab ($38 bacteria) and a commercial certified lab (Caltest: $61 bacteria, $66 nitrate, $445 homeowner panel). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Sonoma County Public Health Lab fee schedule, Caltest homeowner packages, HomeGuide cost guides, Angi: cost to shock a well.

Questions Kern County well owners ask

How many homes in Kern County are on a well?

About 9,078, or 3% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.

Where is the closest certified lab to Kern County?

Pace Analytical Services, LLC dba BC Laboratories, Inc. in Bakersfield, about 7 miles away. Call first to ask whether they accept homeowner samples.

Do I need a permit to drill a well in Kern County?

No statewide water test. State law (Water Code 13801) makes the county the permitting agency: you need a well permit from the county environmental health department before drilling, the well must be built to the California Well Standards in DWR Bulletin 74 (annular seal, setbacks from septic systems and property lines, disinfection) by a C-57 licensed contractor, and the driller files a Well Completion Report with the Department of Water Resources within 60 days. Most counties require a bacteriological sample, and some add nitrate, before they sign off the permit, so check your county's well ordinance.

What does a well test cost near Kern County?

Published lab fees in California: $38 to $61 for a bacteria test and $66 for nitrate. Sonoma County Public Health Lab ($38 bacteria) and a commercial certified lab (Caltest: $61 bacteria, $66 nitrate, $445 homeowner panel). Mail-in kits cost about the same as walking in.