Verified license

West Coast Pump & Well Works

Reno, NV · Washoe CountyWell drilling and pump installation

Call (775) 412-5997
Directions
License status
Active
checked September 29, 2026
License number
1091405
NV record
Services
5
Pump Installation and more
Counties served
3
on the state record
Licensed in
2 states
NV and CA

About West Coast Pump & Well Works

West Coast Pump & Well Works is a well drilling and pump installation contractor based in Reno, NV (Washoe County). The NV licensing program lists license 1091405 as active, and we last checked the record on September 29, 2026.

The state record covers pump installation, pump repair, well abandonment, well drilling and well repair. It lists 3 counties where the business works, including Alpine County, Plumas County and Sierra County. The business also holds a license in California.

This profile is built from public state license records checked on September 29, 2026. Well Water Insider does not rate or endorse contractors. Own this business? Claim the profile to add photos, hours and a description.

License record

Verified against state records
License number
1091405
License type
Well drilling and pump installation
Status
Active
Expires
May 31, 2028
Last verified
September 29, 2026

Check this license yourself on the official NV lookup.

Also licensed in

  • California: license 1091405, well drilling and pump installation, expires May 31, 2028 (state lookup)
What the state record says

Holds an active California C-57 Well Drilling contractor license (CSLB license 1091405, limited liability company, first issued 2022, current through 2028-05-31). The C-57 classification covers drilling, casing, cleaning, repairing and destroying water wells and installing and repairing well pumps. Filed 5 well completion reports with the Department of Water Resources since 2016 (4 new wells, 5 of them domestic supply), most recently in June 2026, mostly in Alpine, Plumas and Sierra counties.

California: Holds an active California C-57 Well Drilling contractor license (CSLB license 1091405, limited liability company, first issued 2022, current through 2028-05-31). The C-57 classification covers drilling, casing, cleaning, repairing and destroying water wells and installing and repairing well pumps. Filed 5 well completion reports with the Department of Water Resources since 2016 (4 new wells, 5 of them domestic supply), most recently in June 2026, mostly in Alpine, Plumas and Sierra counties.

Services

What the NV record says West Coast Pump & Well Works is licensed or registered to do.

Pump Installation

Setting a new submersible or jet pump with the pressure tank, switch and controls.

Pump Repair

Tracking down low pressure, short cycling or no water, then repairing or replacing parts of the pump system.

Well Abandonment

Sealing an unused well to state standards so it cannot carry surface water down into the aquifer.

Well Drilling

Drilling a new private well, setting the casing and grouting it the way state rules require.

Well Repair

Fixing casings, caps, pitless adapters and other parts of an existing well.

Service area

Based in Washoe County, NV. The state record lists 3 counties.

Business address

  • Alpine County
  • Plumas County
  • Sierra County

Typical costs for these services

National ranges to help you read a quote. They are not prices from West Coast Pump & Well Works; ask for a written estimate.

Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

National 2026 ranges. Sources, checked September 2026: HomeGuide cost guides, Angi.

Certified labs nearby

Test your water before and after any work on the well.

Cranmer Engineering, Inc.Grass Valley, CA · 70.5 miOnterris Laboratories, LLC. – CAEl Dorado Hills, CA · 90.5 miOnterris Laboratories, LLCEl Dorado Hills, CA · 91.9 mi
All labs near here

Before you hire

  1. 1

    Confirm the license

    Look up license 1091405 on the NV state lookup and make sure it is active for the work you need. Open the NV lookup.

  2. 2

    Get a written estimate

    Ask for the scope, parts, depth or pump size, permit fees and warranty in writing. Compare two or three quotes for big jobs.

  3. 3

    Ask about permits and the well log

    New wells and many repairs are reported to the state. Ask who files the paperwork and for a copy of the well log.

  4. 4

    Test the water after the work

    Any work on a well can disturb bacteria. Test for coliform bacteria once the job is done.

Questions about West Coast Pump & Well Works

Is West Coast Pump & Well Works licensed?

Yes. The NV record shows license 1091405 (well drilling and pump installation) with the status "active", last checked on September 29, 2026. You can confirm it on the state lookup.

What services does West Coast Pump & Well Works offer?

The state record lists pump installation, pump repair, well abandonment, well drilling and well repair. Call to confirm they take on your type of job.

What areas does West Coast Pump & Well Works serve?

The business is based in Washoe County (Reno, NV). The state record lists 3 counties, including Alpine County, Plumas County and Sierra County.

How do I contact West Coast Pump & Well Works?

Call (775) 412-5997. The address on the state record is 1040 Matley Lane Ste A, Reno, NV 89502.

Other licensed contractors near Reno