Friedman & Bruya, Inc.
Homeowner samples
- Arsenic
- Iron and Manganese
- Lead
About 40,900 people in King County, 2% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.
Private wells serve a minority in King County: about 40,900 people, 2% of residents, by the U.S. Geological Survey's 2010 estimate, one of the lowest shares in Washington. If yours is one of them, testing and upkeep are up to you.
The rules that apply in King County are set at the state level in Washington. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.
No statewide water test from Ecology. What the state requires is a notice of intent and fee filed with Ecology at least 72 hours before drilling, a licensed water well driller, construction to the chapter 173-160 WAC standards (100 ft from septic drainfields, surface seal, a well tag) and a well report filed within 30 days. The test comes in through the county: to get a building permit on a well, most counties ask for proof of potable water, which usually means a coliform bacteria and nitrate test from an accredited lab, and some add arsenic. Check with your county health department before the well is drilled.
No statewide requirement. The seller disclosure form (Form 17) only asks whether the property is on a well and whether the water has been tested. Some lenders require a water test before closing, and a few counties require a well inspection or water test when a property with a well changes hands.
The Washington Department of Health recommends testing a private well for coliform bacteria and nitrate every year, retesting nitrate in 6 months if it is 5 mg/L or higher, and testing for arsenic at least twice, once in summer and once in winter. Add hardness, iron, manganese, fluoride, uranium and radon on a first panel, PFAS near military airfields and fire training sites, and test again after flooding, a change in taste, color or smell, or any work on the well.
No statewide free testing. A few local programs test for free or at cost: the Whatcom Conservation District tests nitrate in the Sumas-Blaine aquifer, the Lower Yakima Valley groundwater program tests nitrate in that area, and several county health departments and conservation districts run testing days. The Department of Health says free nitrate and coliform testing is available inside set boundaries of the Lower Yakima Valley and western Benton County. Otherwise, county health laboratories run coliform and nitrate tests for a fee, and Ecology's lab list marks which labs accept samples from the public.
The nearest certified lab that takes samples from homeowners is Friedman & Bruya, Inc. in Seattle, about 5 miles from the county's population center. 12 certified labs are within 40 miles in all. 12 of them say they take samples from homeowners.
12 certified labs within 40 miles of this county
Homeowner samples
Homeowner samples
Homeowner samples
Homeowner samples
Homeowner samples
Homeowner samples
Licensed help in King County includes AAA Pump and Drilling and Access Well Drilling LLC and 29 others. Every listing was matched to the Washington license list; the "verify" link on each profile opens the state lookup.
31 licensed contractors
License 1178 Active
License 1825 Active
License 2236 Active
License 1367 Active
License 2190 Active
License 2874 Active
License 2488 Active
License 2398 Active
License 1815 Active
License WD000705 Active
License 4182 Active
License 1058336 Active
We have no county-level well records for King County yet. Statewide, depth varies widely across the state; logs of nearby wells in Ecology's well report map are the best guide. Contaminants worth testing for in this part of Washington include arsenic, nitrate, coliform bacteria, and iron and manganese. A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Kitsap County, Snohomish County, Pierce County, Jefferson County.
Lab fees: Washington DOH list of certified labs; the Thurston County water lab charges $32 for each test. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Washington DOH nitrate and coliform labs, Thurston County water lab, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 40,900 people, 2% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.
Friedman & Bruya, Inc. in Seattle, about 5 miles from the county's population center. It says it accepts samples from homeowners.
No statewide water test from Ecology. What the state requires is a notice of intent and fee filed with Ecology at least 72 hours before drilling, a licensed water well driller, construction to the chapter 173-160 WAC standards (100 ft from septic drainfields, surface seal, a well tag) and a well report filed within 30 days. The test comes in through the county: to get a building permit on a well, most counties ask for proof of potable water, which usually means a coliform bacteria and nitrate test from an accredited lab, and some add arsenic. Check with your county health department before the well is drilled.
Published lab fees in Washington: $21 to $55 for a bacteria test and $21 to $55 for nitrate (Washington DOH nitrate and coliform labs, Thurston County water lab). Mail-in kits cost about the same as walking in.