Klickitat County Goldendale Lab
Homeowner samples
- Coliform Bacteria
About 6,500 people in Klickitat County, 32% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.
About 6,500 people in Klickitat County, 32% of residents, rely on a private well, according to a 2010 U.S. Geological Survey estimate. That is well above the Washington figure of 10%. Nobody tests, treats or inspects that water unless the owner does.
Private wells in Klickitat County follow Washington's statewide rules, administered by the Washington Department of Ecology, Well Construction and Licensing Program. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.
No statewide water test from Ecology. What the state requires is a notice of intent and fee filed with Ecology at least 72 hours before drilling, a licensed water well driller, construction to the chapter 173-160 WAC standards (100 ft from septic drainfields, surface seal, a well tag) and a well report filed within 30 days. The test comes in through the county: to get a building permit on a well, most counties ask for proof of potable water, which usually means a coliform bacteria and nitrate test from an accredited lab, and some add arsenic. Check with your county health department before the well is drilled.
No statewide requirement. The seller disclosure form (Form 17) only asks whether the property is on a well and whether the water has been tested. Some lenders require a water test before closing, and a few counties require a well inspection or water test when a property with a well changes hands.
The Washington Department of Health recommends testing a private well for coliform bacteria and nitrate every year, retesting nitrate in 6 months if it is 5 mg/L or higher, and testing for arsenic at least twice, once in summer and once in winter. Add hardness, iron, manganese, fluoride, uranium and radon on a first panel, PFAS near military airfields and fire training sites, and test again after flooding, a change in taste, color or smell, or any work on the well.
No statewide free testing. A few local programs test for free or at cost: the Whatcom Conservation District tests nitrate in the Sumas-Blaine aquifer, the Lower Yakima Valley groundwater program tests nitrate in that area, and several county health departments and conservation districts run testing days. The Department of Health says free nitrate and coliform testing is available inside set boundaries of the Lower Yakima Valley and western Benton County. Otherwise, county health laboratories run coliform and nitrate tests for a fee, and Ecology's lab list marks which labs accept samples from the public.
For a homeowner test, start with Klickitat County Goldendale Lab in Goldendale (about 16 miles from the county's population center), the closest certified lab that accepts private well samples. The cards below list every certified lab within 40 miles and which tests each is certified for.
2 certified labs within 40 miles of this county
Homeowner samples
Homeowner samples
17 licensed contractors list Klickitat County as a home base or service area, including Black Dog Industries, LLC and Cascade Well Drilling LLC. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.
17 licensed contractors
License 2820 Active
License 1934 Active
License 2705 Active
License 3253 Active
License 3245 Active
License 3296 Active
License 2910 Active
License 3353 Active
License 3019 Active
License 2740 Active
License 1256 Active
License 2502 Active
We have no county-level well records for Klickitat County yet. Statewide, depth varies widely across the state; logs of nearby wells in Ecology's well report map are the best guide. Contaminants worth testing for in this part of Washington include arsenic, nitrate, coliform bacteria, and iron and manganese. A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Skamania County, Yakima County, Clark County, Kittitas County.
Lab fees: Washington DOH list of certified labs; the Thurston County water lab charges $32 for each test. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Washington DOH nitrate and coliform labs, Thurston County water lab, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 6,500 people, 32% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.
Klickitat County Goldendale Lab in Goldendale, about 16 miles from the county's population center. It says it accepts samples from homeowners.
No statewide water test from Ecology. What the state requires is a notice of intent and fee filed with Ecology at least 72 hours before drilling, a licensed water well driller, construction to the chapter 173-160 WAC standards (100 ft from septic drainfields, surface seal, a well tag) and a well report filed within 30 days. The test comes in through the county: to get a building permit on a well, most counties ask for proof of potable water, which usually means a coliform bacteria and nitrate test from an accredited lab, and some add arsenic. Check with your county health department before the well is drilled.
Published lab fees in Washington: $21 to $55 for a bacteria test and $21 to $55 for nitrate (Washington DOH nitrate and coliform labs, Thurston County water lab). Mail-in kits cost about the same as walking in.