Washington county well guide

Well Water in Pacific County, WA: Testing, Contractors and Rules

About 4,000 people in Pacific County, 19% of residents, get their water from a private well. Nobody tests that water unless the owner does.

19%of residents on a private well
Share on private wells
Pacific County19%
Washington10%
11licensed contractors serve the county
11 mito the nearest certified lab that takes homeowner samples, Pacific County DCD WQ Laboratory
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.

The U.S. Geological Survey's 2010 estimate puts the number of Pacific County residents on private wells at about 4,000, or 19%, well above the Washington figure of 10%. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Pacific County

The rules that apply in Pacific County are set at the state level in Washington. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.

At a glance

Water test for a new wellNot required statewide

No statewide water test from Ecology. What the state requires is a notice of intent and fee filed with Ecology at least 72 hours before drilling, a licensed water well driller, construction to the chapter 173-160 WAC standards (100 ft from septic drainfields, surface seal, a well tag) and a well report filed within 30 days. The test comes in through the county: to get a building permit on a well, most counties ask for proof of potable water, which usually means a coliform bacteria and nitrate test from an accredited lab, and some add arsenic. Check with your county health department before the well is drilled.

Water test when a home is soldNot required statewide

No statewide requirement. The seller disclosure form (Form 17) only asks whether the property is on a well and whether the water has been tested. Some lenders require a water test before closing, and a few counties require a well inspection or water test when a property with a well changes hands.

What the state recommends

The Washington Department of Health recommends testing a private well for coliform bacteria and nitrate every year, retesting nitrate in 6 months if it is 5 mg/L or higher, and testing for arsenic at least twice, once in summer and once in winter. Add hardness, iron, manganese, fluoride, uranium and radon on a first panel, PFAS near military airfields and fire training sites, and test again after flooding, a change in taste, color or smell, or any work on the well.

Free or low-cost testingAvailable

No statewide free testing. A few local programs test for free or at cost: the Whatcom Conservation District tests nitrate in the Sumas-Blaine aquifer, the Lower Yakima Valley groundwater program tests nitrate in that area, and several county health departments and conservation districts run testing days. The Department of Health says free nitrate and coliform testing is available inside set boundaries of the Lower Yakima Valley and western Benton County. Otherwise, county health laboratories run coliform and nitrate tests for a fee, and Ecology's lab list marks which labs accept samples from the public.

Getting your water tested near Pacific County

The nearest certified lab that takes samples from homeowners is Pacific County DCD WQ Laboratory in South Bend, about 11 miles from the county's population center. 2 certified labs are within 40 miles in all. 2 of them say they take samples from homeowners.

Licensed well contractors serving Pacific County

Licensed help in Pacific County includes Advanced Drilling LLC and Arcadia Drilling Inc and 9 others. Every listing was matched to the Washington license list; the "verify" link on each profile opens the state lookup.

Well depth and water chemistry

We have no county-level well records for Pacific County yet. Statewide, depth varies widely across the state; logs of nearby wells in Ecology's well report map are the best guide. Contaminants worth testing for in this part of Washington include arsenic, nitrate, coliform bacteria, and iron and manganese. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • ArsenicPuget Sound lowland, Whatcom, Snohomish and Pierce counties, parts of the Columbia Plateau
  • NitrateSumas-Blaine aquifer in Whatcom County, Lower Yakima Valley, the Columbia Basin, Spokane-Rathdrum valley
  • Coliform bacteriaShallow wells and dug wells west of the Cascades
  • Iron and manganeseGlacial deposits around Puget Sound
  • HardnessColumbia Plateau basalt
  • Uranium and radonOkanogan and Spokane County granite
  • Fluoride and sodiumDeep basalt wells
  • Saltwater intrusionIsland and coastal wells in San Juan, Island, Kitsap and Jefferson counties
  • PFAS near military bases and airfields

Neighboring counties: Wahkiakum County, Grays Harbor County, Lewis County, Cowlitz County.

Typical well costs: Washington lab fees and national price ranges

Bacteria test (coliform and E. coli)$21 to $55published Washington lab fees
Nitrate test$21 to $55published Washington lab fees
Broad panel (metals and minerals)$85 to $450state and university lab packages
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: Washington DOH list of certified labs; the Thurston County water lab charges $32 for each test. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Washington DOH nitrate and coliform labs, Thurston County water lab, HomeGuide cost guides, Angi: cost to shock a well.

Questions Pacific County well owners ask

How many people in Pacific County use a private well?

The U.S. Geological Survey estimates about 4,000 people, 19% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.

Where is the closest certified lab to Pacific County?

Pacific County DCD WQ Laboratory in South Bend, about 11 miles from the county's population center. It says it accepts samples from homeowners.

Do I need a permit to drill a well in Pacific County?

No statewide water test from Ecology. What the state requires is a notice of intent and fee filed with Ecology at least 72 hours before drilling, a licensed water well driller, construction to the chapter 173-160 WAC standards (100 ft from septic drainfields, surface seal, a well tag) and a well report filed within 30 days. The test comes in through the county: to get a building permit on a well, most counties ask for proof of potable water, which usually means a coliform bacteria and nitrate test from an accredited lab, and some add arsenic. Check with your county health department before the well is drilled.

What does a well test cost near Pacific County?

Published lab fees in Washington: $21 to $55 for a bacteria test and $21 to $55 for nitrate (Washington DOH nitrate and coliform labs, Thurston County water lab). Mail-in kits cost about the same as walking in.