Washington county well guide

Well Water in Stevens County, WA: Testing, Contractors and Rules

About 8,497 households in Stevens County, 49% of the county, rely on a private well. Nobody tests that water unless the owner does.

Labs within 40 milesLicensed contractors
49%of households on a private well
Share on wells, county vs state
Stevens County49%
Washington average14%
24licensed contractors serve the county
40+ mito a certified lab; mail-in kits recommended
Nostatewide test required when a home is sold

Most homes in Stevens County are on a private well: about 8,497 households, 49% of the county. That makes Stevens County one of the places in Washington where the water department is the homeowner.

Local rules for wells in Stevens County

Private wells in Stevens County follow Washington's statewide rules, administered by Washington Department of Ecology, Well Construction and Licensing Program. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though lenders often ask for one. The cards below show the details and the official sources.

At a glance

Water test for a new wellNot required statewide

No statewide water test from Ecology. What the state requires is a notice of intent and fee filed with Ecology at least 72 hours before drilling, a licensed water well driller, construction to the chapter 173-160 WAC standards (100 ft from septic drainfields, surface seal, a well tag) and a well report filed within 30 days. The test comes in through the county: to get a building permit on a well, most counties ask for proof of potable water, which usually means a coliform bacteria and nitrate test from an accredited lab, and some add arsenic. Check with your county health department before the well is drilled.

Water test when a home is soldNot required statewide

No statewide requirement. The seller disclosure form (Form 17) only asks whether the property is on a well and whether the water has been tested. FHA, VA and USDA loans normally require a bacteria, nitrate and lead sample before closing, and a few counties require a well inspection or water test when a property with a well changes hands.

What the state recommends

The Washington Department of Health recommends testing a private well for coliform bacteria every year and for nitrate every three years, and a first-time test for arsenic, which is common in Washington groundwater. Add hardness, iron, manganese, fluoride, uranium and radon on a first panel, PFAS near military airfields and fire training sites, and test again after flooding, a change in taste, color or smell, or any work on the well.

Free or low-cost testingAvailable

No statewide free testing. A few local programs test for free or at cost: the Whatcom Conservation District tests nitrate in the Sumas-Blaine aquifer, the Lower Yakima Valley groundwater program tests nitrate in that area, and several county health departments and conservation districts run testing days. Otherwise, county health laboratories run a coliform test for roughly $25 to $50 and a nitrate test for a little more, and Ecology's lab list marks which labs accept samples from the public.

Getting your water tested near Stevens County

No state-certified lab sits within 40 miles of the center of Stevens County. That is common in rural Washington, and the practical answer is a mail-in kit: the lab ships bottles, you sample at the kitchen tap and ship them back cold. The finder below widens the search to the whole state.

No listings yet for this area. Try widening your search.

Licensed well contractors serving Stevens County

24 licensed contractors serve Stevens County, including A&H Well Services LLC and Beardslee Drilling LLC. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

Wells in Stevens County typically reach 60 to 250 ft in the glacial deposits of the Puget Sound lowland and the Columbia River valleys; 150 to 500 ft in the basalt of the Columbia Plateau and the Yakima and Walla Walla valleys; 100 to 400 ft in the fractured rock of the Cascade and Okanogan foothills, where yields are low. What comes up with the water depends on the aquifer, and across Washington the usual suspects are arsenic (puget sound lowland, whatcom, snohomish and pierce counties, parts of the columbia plateau). A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Arsenic (Puget Sound lowland
  • Whatcom
  • Snohomish and Pierce counties
  • Parts of the Columbia Plateau)
  • Nitrate (Sumas-Blaine aquifer in Whatcom County
  • Lower Yakima Valley
  • The Columbia Basin
  • Spokane-Rathdrum valley)
  • Coliform bacteria (shallow wells and dug wells west of the Cascades)
  • Iron and manganese (glacial deposits around Puget Sound)
  • Hardness (Columbia Plateau basalt)
  • Uranium and radon (Okanogan and Spokane County granite)
  • Fluoride and sodium (deep basalt wells)
  • Saltwater intrusion (island and coastal wells in San Juan
  • Island
  • Kitsap and Jefferson counties)
  • PFAS near military bases and airfields

Neighboring counties: Pend Oreille County, Ferry County, Spokane County, Lincoln County.

What well work costs in Stevens County

Basic bacteria and nitrate test$25 to $75lab fee, homeowner sample
Full panel lab test$150 to $400metals, VOCs, radiologicals
Well inspection$250 to $550flow, pressure, visual, water test
Submersible pump replacement$1,200 to $4,500parts and labor
Pressure tank replacement$400 to $1,200installed
Whole-house treatment system$800 to $6,000softener, iron filter, UV, RO
New well drilled$5,500 to $25,000about $25 to $65 per foot
Shock chlorination$80 to $300or about $20 as a DIY job

National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.

Questions Stevens County well owners ask

How many homes in Stevens County are on a well?

About 8,497, or 49% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.

Where is the closest certified lab to Stevens County?

There is no certified lab within 40 miles. Use a mail-in kit from a Washington certified lab, or the county health department if it collects samples.

Do I need a permit to drill a well in Stevens County?

No statewide water test from Ecology. What the state requires is a notice of intent and fee filed with Ecology at least 72 hours before drilling, a licensed water well driller, construction to the chapter 173-160 WAC standards (100 ft from septic drainfields, surface seal, a well tag) and a well report filed within 30 days. The test comes in through the county: to get a building permit on a well, most counties ask for proof of potable water, which usually means a coliform bacteria and nitrate test from an accredited lab, and some add arsenic. Check with your county health department before the well is drilled.

What does a well test cost near Stevens County?

A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. Mail-in kits cost about the same as walking in.