UGA Agricultural and Environmental Services Laboratories (Feed and Environmental Water Laboratory)
Homeowner samples
- Arsenic
- Coliform Bacteria
- Full Homeowner Panel
- Hardness
- Iron and Manganese
- Lead
- Nitrate / Nitrite
About 13,600 people in Hart County, 54% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.
Most people in Hart County get their water from a private well: about 13,600 residents, or 54%, by the U.S. Geological Survey's 2010 estimate, well above the Georgia figure of 14%. Nobody tests, treats or inspects that water unless the owner does.
The rules that apply in Hart County are set at the state level in Georgia. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.
No statewide water test and no state permit for an individual household well. The Water Well Standards Act requires the well to be drilled by a licensed water well contractor to the state construction standards (grouted casing, 10 ft from sewer lines, 50 ft from septic tanks and 100 ft from drainfields), and the contractor must disinfect it and give you a well record. Some counties have their own well rules, which may include a permit and a bacteriological test through the county environmental health office before the well is used, so check with your county.
No statewide requirement. The seller's disclosure only says whether the property is on a well. Some lenders require a water test before closing, and a few county health departments require a well inspection at transfer.
The Department of Public Health and UGA Extension recommend testing a private well for coliform bacteria every year and running the UGA basic water test (pH, hardness, nitrate and about 20 metals including iron, manganese, lead, copper and arsenic) every two to three years. Add radon and uranium in the Piedmont and the mountains, sodium and chloride near the coast, and test again after flooding, well work or a change in taste, color or smell.
Every county has a UGA Cooperative Extension office that sells the UGA water test kits at cost: the basic chemistry test (W1) is $20 and the bacteria test is $40, with results explained by the county agent. Extension and the county health departments also run periodic free or discounted testing days, and several county environmental health offices test bacteria for a small fee.
The nearest certified lab that takes samples from homeowners is UGA Agricultural and Environmental Services Laboratories (Feed and Environmental Water Laboratory) in Athens, about 37 miles from the county's population center. 1 certified lab is within 40 miles in all. One of them says it takes samples from homeowners.
1 certified labs within 40 miles of this county
Homeowner samples
Licensed help in Hart County includes Herring Well Drilling & Boring Company and Phillips Appliance & Plumbing Service and 1 other. Every listing was matched to the Georgia license list; the "verify" link on each profile opens the state lookup.
3 licensed contractors
License 461 Active
License P46 Active
License 153 Active
We have no county-level well records for Hart County yet. Statewide, depth varies widely across the state; logs of nearby wells are the best guide. Piedmont and mountain wells are drilled into fractured granite and gneiss with modest yields, Coastal Plain wells draw from the Floridan and Claiborne aquifers, and some coastal and flatwoods wells are shallow surficial wells. Contaminants worth testing for in this part of Georgia include coliform bacteria, acidic corrosive water that pulls lead and copper from plumbing, iron and manganese, and radon and uranium. A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Franklin County, Elbert County, Stephens County, Madison County.
Lab fees: County health departments ($30 bacteria) or the UGA lab through your extension office ($40 bacteria, $12 nitrate, $60 expanded test). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Southeast Health District, UGA Agricultural and Environmental Services Lab, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 13,600 people, 54% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.
UGA Agricultural and Environmental Services Laboratories (Feed and Environmental Water Laboratory) in Athens, about 37 miles from the county's population center. It says it accepts samples from homeowners.
No statewide water test and no state permit for an individual household well. The Water Well Standards Act requires the well to be drilled by a licensed water well contractor to the state construction standards (grouted casing, 10 ft from sewer lines, 50 ft from septic tanks and 100 ft from drainfields), and the contractor must disinfect it and give you a well record. Some counties have their own well rules, which may include a permit and a bacteriological test through the county environmental health office before the well is used, so check with your county.
Published lab fees in Georgia: $30 to $40 for a bacteria test and $12 for nitrate (Southeast Health District, UGA Agricultural and Environmental Services Lab). Mail-in kits cost about the same as walking in.