Georgia county well guide

Well Water in Wilkes County, GA: Testing, Contractors and Rules

About 4,600 people in Wilkes County, 44% of residents, get their water from a private well. Nobody tests that water unless the owner does.

44%of residents on a private well
Share on private wells
Wilkes County44%
Georgia14%
40licensed contractors within 60 miles of the county
36 mito the nearest certified lab that takes homeowner samples, UGA Agricultural and Environmental Services Laboratories (Feed and Environmental Water Laboratory)
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.

The U.S. Geological Survey's 2010 estimate puts the number of Wilkes County residents on private wells at about 4,600, or 44%, well above the Georgia figure of 14%. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Wilkes County

The rules that apply in Wilkes County are set at the state level in Georgia. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.

At a glance

Water test for a new wellNot required statewide

No statewide water test and no state permit for an individual household well. The Water Well Standards Act requires the well to be drilled by a licensed water well contractor to the state construction standards (grouted casing, 10 ft from sewer lines, 50 ft from septic tanks and 100 ft from drainfields), and the contractor must disinfect it and give you a well record. Some counties have their own well rules, which may include a permit and a bacteriological test through the county environmental health office before the well is used, so check with your county.

Water test when a home is soldNot required statewide

No statewide requirement. The seller's disclosure only says whether the property is on a well. Some lenders require a water test before closing, and a few county health departments require a well inspection at transfer.

What the state recommends

The Department of Public Health and UGA Extension recommend testing a private well for coliform bacteria every year and running the UGA basic water test (pH, hardness, nitrate and about 20 metals including iron, manganese, lead, copper and arsenic) every two to three years. Add radon and uranium in the Piedmont and the mountains, sodium and chloride near the coast, and test again after flooding, well work or a change in taste, color or smell.

Free or low-cost testingAvailable

Every county has a UGA Cooperative Extension office that sells the UGA water test kits at cost: the basic chemistry test (W1) is $20 and the bacteria test is $40, with results explained by the county agent. Extension and the county health departments also run periodic free or discounted testing days, and several county environmental health offices test bacteria for a small fee.

Getting your water tested near Wilkes County

The nearest certified lab that takes samples from homeowners is UGA Agricultural and Environmental Services Laboratories (Feed and Environmental Water Laboratory) in Athens, about 36 miles from the county's population center. 1 certified lab is within 40 miles in all. One of them says it takes samples from homeowners.

Licensed well contractors serving Wilkes County

Only one licensed contractor lists Wilkes County as a home base or service area: Gunter Well Drilling LLC. To give you more choice, the list below shows the 40 licensed Georgia contractors within 60 miles of the county, nearest first. Most drillers and pump installers travel well beyond their home county, so call and ask whether they cover your address.

Well depth and water chemistry

We have no county-level well records for Wilkes County yet. Statewide, depth varies widely across the state; logs of nearby wells are the best guide. Piedmont and mountain wells are drilled into fractured granite and gneiss with modest yields, Coastal Plain wells draw from the Floridan and Claiborne aquifers, and some coastal and flatwoods wells are shallow surficial wells. Contaminants worth testing for in this part of Georgia include coliform bacteria, acidic corrosive water that pulls lead and copper from plumbing, iron and manganese, and radon and uranium. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Coliform bacteriaStatewide, worst in shallow and older wells
  • Acidic corrosive water that pulls lead and copper from plumbingPiedmont and mountains
  • Iron and manganesePiedmont and Coastal Plain
  • Radon and uraniumPiedmont granite, north metro Atlanta counties
  • Hardness and hydrogen sulfideFloridan aquifer in south Georgia
  • NitrateSouthwest Georgia farm country, shallow Coastal Plain wells
  • ArsenicLocally in the Piedmont and Coastal Plain
  • Saltwater intrusionBrunswick and the coastal islands
  • PFAS near carpet mills in northwest Georgia and near airfields

Neighboring counties: Taliaferro County, Lincoln County, Oglethorpe County, Warren County.

Typical well costs: Georgia lab fees and national price ranges

Bacteria test (coliform and E. coli)$30 to $40published Georgia lab fees
Nitrate test$12published Georgia lab fees
Broad panel (metals and minerals)$60published Georgia lab fees
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: County health departments ($30 bacteria) or the UGA lab through your extension office ($40 bacteria, $12 nitrate, $60 expanded test). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Southeast Health District, UGA Agricultural and Environmental Services Lab, HomeGuide cost guides, Angi: cost to shock a well.

Questions Wilkes County well owners ask

How many people in Wilkes County use a private well?

The U.S. Geological Survey estimates about 4,600 people, 44% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.

Where is the closest certified lab to Wilkes County?

UGA Agricultural and Environmental Services Laboratories (Feed and Environmental Water Laboratory) in Athens, about 36 miles from the county's population center. It says it accepts samples from homeowners.

Do I need a permit to drill a well in Wilkes County?

No statewide water test and no state permit for an individual household well. The Water Well Standards Act requires the well to be drilled by a licensed water well contractor to the state construction standards (grouted casing, 10 ft from sewer lines, 50 ft from septic tanks and 100 ft from drainfields), and the contractor must disinfect it and give you a well record. Some counties have their own well rules, which may include a permit and a bacteriological test through the county environmental health office before the well is used, so check with your county.

What does a well test cost near Wilkes County?

Published lab fees in Georgia: $30 to $40 for a bacteria test and $12 for nitrate (Southeast Health District, UGA Agricultural and Environmental Services Lab). Mail-in kits cost about the same as walking in.