Well Water in Wilkinson County, GA: Testing, Contractors and Rules
About 1,032 households in Wilkinson County, 28% of the county, rely on a private well. Nobody tests that water unless the owner does.
Wilkinson County has an estimated 1,032 households on private wells, 28% of the county. If you are one of them, testing, treatment and repairs are yours to arrange.
Local rules for wells in Wilkinson County
Private wells in Wilkinson County follow Georgia's statewide rules, administered by Georgia Environmental Protection Division and the State Water Well Standards Advisory Council. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though lenders often ask for one. The cards below show the details and the official sources.
At a glance
No statewide water test and no state permit for an individual household well. The Water Well Standards Act requires the well to be drilled by a licensed water well contractor to the state construction standards (grouted casing, 10 ft from property lines, 50 ft from septic tanks and 100 ft from drainfields), and the contractor must disinfect it and give you a well record. Several counties, mostly in north Georgia and around Atlanta, require a well permit and a bacteriological test through the county environmental health office before the well is used, so check with your county.
No statewide requirement. The seller's disclosure only says whether the property is on a well. FHA, VA and USDA loans normally require a bacteria, nitrate and lead sample from a certified lab before closing, and a few county health departments require a well inspection at transfer.
The Department of Public Health and UGA Extension recommend testing a private well for coliform bacteria every year and running the UGA basic water test (pH, hardness, nitrate and about 20 metals including iron, manganese, lead, copper and arsenic) every two to three years. Add radon and uranium in the Piedmont and the mountains, sodium and chloride near the coast, and test again after flooding, well work or a change in taste, color or smell.
Every county has a UGA Cooperative Extension office that sells the UGA water test kits at cost: the basic chemistry test (W1) and the bacteria test (W33) run roughly $30 to $50 each, with results explained by the county agent. Extension and the county health departments also run periodic free or discounted testing days, and several county environmental health offices test bacteria for a small fee.
Getting your water tested near Wilkinson County
No state-certified lab sits within 40 miles of the center of Wilkinson County. That is common in rural Georgia, and the practical answer is a mail-in kit: the lab ships bottles, you sample at the kitchen tap and ship them back cold. The finder below widens the search to the whole state.
No listings yet for this area. Try widening your search.
Licensed well contractors serving Wilkinson County
No licensed contractor lists Wilkinson County as a home base or service area yet. The finder below searches the whole state; most drillers travel several counties for a job.
No listings yet for this area. Try widening your search.
Well depth and water chemistry
Wells in Wilkinson County typically reach 200 to 500 ft in the fractured granite and gneiss of the Piedmont and north Georgia mountains, where yields are modest; 100 to 400 ft in the Floridan and Claiborne aquifers of the Coastal Plain south of the fall line, deeper (400 to 800 ft) in the southwest; shallow surficial wells of 30 to 100 ft along the coast and in the flatwoods. What comes up with the water depends on the aquifer, and across Georgia the usual suspects are coliform bacteria (statewide, worst in shallow and older wells), acidic corrosive water that pulls lead and copper from plumbing (piedmont and mountains), iron and manganese (piedmont and coastal plain). A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
- Coliform bacteria (statewide
- Worst in shallow and older wells)
- Acidic corrosive water that pulls lead and copper from plumbing (Piedmont and mountains)
- Iron and manganese (Piedmont and Coastal Plain)
- Radon and uranium (Piedmont granite
- North metro Atlanta counties)
- Hardness and hydrogen sulfide (Floridan aquifer in south Georgia)
- Nitrate (southwest Georgia farm country
- Shallow Coastal Plain wells)
- Arsenic (locally in the Piedmont and Coastal Plain)
- Saltwater intrusion (Brunswick and the coastal islands)
- PFAS near carpet mills in northwest Georgia and near airfields
Neighboring counties: Twiggs County, Baldwin County, Jones County, Bibb County.
What well work costs in Wilkinson County
National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.
Questions Wilkinson County well owners ask
How many homes in Wilkinson County are on a well?
About 1,032, or 28% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.
Where is the closest certified lab to Wilkinson County?
There is no certified lab within 40 miles. Use a mail-in kit from a Georgia certified lab, or the county health department if it collects samples.
Do I need a permit to drill a well in Wilkinson County?
No statewide water test and no state permit for an individual household well. The Water Well Standards Act requires the well to be drilled by a licensed water well contractor to the state construction standards (grouted casing, 10 ft from property lines, 50 ft from septic tanks and 100 ft from drainfields), and the contractor must disinfect it and give you a well record. Several counties, mostly in north Georgia and around Atlanta, require a well permit and a bacteriological test through the county environmental health office before the well is used, so check with your county.
What does a well test cost near Wilkinson County?
A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. Mail-in kits cost about the same as walking in.