Troy Risk Inc.
Homeowner samples
- Coliform Bacteria
About 6,700 people in Monroe County, 5% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.
Most of Monroe County is on public water, but a 2010 U.S. Geological Survey estimate counts about 6,700 residents (5%) on private wells, below the Indiana figure of 22%. If yours is one of them, testing and upkeep are up to you.
Private wells in Monroe County follow Indiana's statewide rules, administered by the Indiana Department of Natural Resources, Division of Water. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.
No statewide water test. The state requires the well to be drilled by a DNR-licensed water well driller to the 312 IAC 13 construction standards (setbacks of 50 ft from septic tanks and drainfields, grouted casing, disinfection) and a well record filed with the Division of Water within 30 days. Most county health departments require a well permit under the county ordinance before drilling and many ask for a bacteriological sample before the well is approved for use, so check with the county first.
No statewide requirement. The Indiana seller's disclosure form asks whether the water supply is a well and whether there are known problems, nothing more. Some lenders require a water test before closing, and a few county health departments require a well inspection at transfer.
The Indiana Department of Health recommends testing a private well for coliform bacteria and nitrate every year and running a broader panel every few years or when something changes: arsenic (common in Indiana's glacial aquifers), iron, manganese, hardness, sulfate, sodium, lead and copper. Add radon, uranium and fluoride in south-central Indiana bedrock wells and PFAS near airfields and industrial sites, and test again after flooding, well work or a change in taste, color or smell.
No statewide free program. The Indiana Department of Health laboratory and most county health departments test private well samples for bacteria and nitrate for a fee, and several counties run periodic free testing days or arsenic screening. The IDOH lab finder below lists the certified labs that take samples from the public.
For a homeowner test, start with Troy Risk Inc. in Bloomington (about 2 miles from the county's population center), the closest certified lab that accepts private well samples. The cards below list every certified lab within 40 miles and which tests each is certified for.
4 certified labs within 40 miles of this county
Homeowner samples
Homeowner samples
Homeowner samples
Homeowner samples
4 licensed contractors list Monroe County as a home base or service area, including Direct Push Analytical Corporation and Layne Christensen Co. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.
4 licensed contractors
License 4770 Active
License 2357 Active
License 0504-0603-00 Active
License NYRD01743 Active
We have no county-level well records for Monroe County yet. Statewide, depth varies widely across the state. Wells in northern and central Indiana mostly draw from glacial sand and gravel; wells in the south-central and southwestern hills go into limestone, sandstone and shale bedrock, where yields are lower and dry holes are common. Logs of nearby wells are the best guide. Contaminants worth testing for in this part of Indiana include arsenic, iron and manganese, hardness, and nitrate. A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Owen County, Brown County, Lawrence County, Morgan County.
Lab fees: Certified lab drop-off through a county soil and water district ($15 each); the state lab runs nitrate for $10 plus shipping. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Hamilton County SWCD, Indiana Department of Health lab, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 6,700 people, 5% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.
Troy Risk Inc. in Bloomington, about 2 miles from the county's population center. It says it accepts samples from homeowners.
No statewide water test. The state requires the well to be drilled by a DNR-licensed water well driller to the 312 IAC 13 construction standards (setbacks of 50 ft from septic tanks and drainfields, grouted casing, disinfection) and a well record filed with the Division of Water within 30 days. Most county health departments require a well permit under the county ordinance before drilling and many ask for a bacteriological sample before the well is approved for use, so check with the county first.
Published lab fees in Indiana: $15 for a bacteria test and $10 to $15 for nitrate (Hamilton County SWCD, Indiana Department of Health lab). Mail-in kits cost about the same as walking in.