Tennessee county well guide

Well Water in Lake County, TN: Testing, Contractors and Rules

About 1,124 households in Lake County, 37% of the county, rely on a private well. Nobody tests that water unless the owner does.

Labs within 40 milesLicensed contractors
37%of households on a private well
Share on wells, county vs state
Lake County37%
Tennessee average9%
4licensed contractors serve the county
40+ mito a certified lab; mail-in kits recommended
Nostatewide test required when a home is sold

About one in 3 households in Lake County relies on a private well, around 1,124 homes. Outside the towns with public water, wells are the norm here.

Local rules for wells in Lake County

The rules that apply in Lake County are set at the state level in Tennessee. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.

At a glance

Water test for a new wellNot required statewide

No statewide water test and no state permit for a household well. The Water Well Act requires the well to be drilled by a TDEC-licensed water well driller to the rule 0400-45-09 construction standards (steel casing at least 19 ft deep or into bedrock, grouted, ending 6 in above grade with a sanitary seal; 50 ft from septic tanks and drainfields, 10 ft from property lines), and the driller must file a well report with TDEC within 30 days. A few counties permit wells through the county health department, Shelby County most notably, and lenders usually want a bacteria test on a new well.

Water test when a home is soldNot required statewide

No statewide requirement. The Tennessee Residential Property Condition Disclosure asks only whether the water supply is a well and whether the seller knows of problems. FHA, VA and USDA loans normally require a bacteria, nitrate and lead sample from a certified lab before closing.

What the state recommends

TDEC and the Department of Health recommend testing a private well for coliform bacteria every year, and for nitrate, pH, hardness, iron, manganese, lead and copper at least once and again every few years. Add radon and uranium in East Tennessee bedrock wells, arsenic on the Highland Rim and in West Tennessee sands, pesticides in shallow Coastal Plain wells, and test again after flooding, well work or a change in taste, color or smell. Karst wells in Middle and East Tennessee should be retested after heavy rain, when bacteria and turbidity spike.

Free or low-cost testingAvailable

No statewide free program. The Department of Health laboratory in Nashville (and the Knoxville regional laboratory for East Tennessee) tests private well and spring samples for bacteria, nitrate and metals for a modest fee; bottles and forms come through the county health department or the laboratory (615-262-6337). Some county health departments and UT Extension offices run periodic screening days.

Getting your water tested near Lake County

Lake County has no certified lab within 40 miles, so most owners here test by mail. Order bottles from a certified lab, sample from the cold tap before any treatment, and ship the same day with an ice pack.

No listings yet for this area. Try widening your search.

Licensed well contractors serving Lake County

Licensed help in Lake County includes Ark-Mo Well Drilling and Service Co., Inc and Ark-Mo Well Drilling Company, Inc and 2 others. Every listing was matched to the Tennessee license list; the "verify" link on each profile opens the state lookup.

Well depth and water chemistry

Well depth and water chemistry in Lake County follow the rock underneath it. Typical wells here run 100 to 300 ft in the limestone of the Central Basin and Highland Rim of Middle Tennessee; 200 to 600 ft in the folded limestone, dolomite and shale of the East Tennessee valley and the Blue Ridge, where yields swing widely; 100 to 400 ft in Cumberland Plateau sandstone; 60 to 200 ft in the sands and gravels of West Tennessee, deeper (200 to 500 ft) into the Memphis Sand. Contaminants worth testing for in this part of Tennessee include coliform bacteria (the most common failure statewide, worst in karst limestone wells that draw surface water after rain), nitrate (farm counties and shallow west tennessee wells), hardness (limestone across middle and east tennessee).

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Coliform bacteria (the most common failure statewide
  • Worst in karst limestone wells that draw surface water after rain)
  • Nitrate (farm counties and shallow West Tennessee wells)
  • Hardness (limestone across Middle and East Tennessee)
  • Iron and manganese (West Tennessee sands
  • The Cumberland Plateau and shale wells)
  • Hydrogen sulfide (shale and deeper limestone wells)
  • Turbidity after storms (karst wells)
  • Acidic corrosive water that pulls lead and copper from plumbing (Plateau sandstone and Blue Ridge wells)
  • Radon and uranium (East Tennessee crystalline rock and black shale)
  • Arsenic (locally on the Highland Rim and in West Tennessee)
  • PFAS near airfields and industrial sites

Neighboring counties: Obion County, Dyer County, Weakley County, Lauderdale County.

What well work costs in Lake County

Bacteria test (coliform and E. coli)$40published Tennessee lab fees
Nitrate test$10 to $80varies by lab; ask when you order
Broad panel (metals and minerals)$125published Tennessee lab fees
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Tennessee Tech Water Center: $40 bacteria, $125 basic package with bacteria, minerals and nitrate. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Tennessee Tech Water Center lab, HomeGuide cost guides, Angi: cost to shock a well.

Questions Lake County well owners ask

How many homes in Lake County are on a well?

About 1,124, or 37% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.

Where is the closest certified lab to Lake County?

There is no certified lab within 40 miles. Use a mail-in kit from a Tennessee certified lab, or the county health department if it collects samples.

Do I need a permit to drill a well in Lake County?

No statewide water test and no state permit for a household well. The Water Well Act requires the well to be drilled by a TDEC-licensed water well driller to the rule 0400-45-09 construction standards (steel casing at least 19 ft deep or into bedrock, grouted, ending 6 in above grade with a sanitary seal; 50 ft from septic tanks and drainfields, 10 ft from property lines), and the driller must file a well report with TDEC within 30 days. A few counties permit wells through the county health department, Shelby County most notably, and lenders usually want a bacteria test on a new well.

What does a well test cost near Lake County?

Published lab fees in Tennessee: $40 for a bacteria test. Tennessee Tech Water Center: $40 bacteria, $125 basic package with bacteria, minerals and nitrate. Mail-in kits cost about the same as walking in.