Blue Ridge Waterworks, LLC
License 1073, 1245, 1129 Active
- Geothermal
- Pump Installation
- Pump Repair
- Well Abandonment
- Well Drilling
- Well Repair
Perry Drilling is a well drilling and pump installation contractor based in Ashland City, TN (Cheatham County). The Tennessee licensing program lists license 350 as active, and we last checked the record on September 29, 2026.
The state record covers pump installation, pump repair, water treatment, well abandonment, well drilling and well repair. It lists 3 counties where the business works, including Robertson County, Cheatham County and Montgomery County.
This profile is built from public state license records checked on September 29, 2026. Well Water Insider does not rate or endorse contractors. Own this business? Claim the profile to add photos, hours and a description.
Check this license yourself on the official Tennessee lookup.
Tennessee-licensed water well treatment installer, pump installer, water well driller (TDEC license 350, held by Marlin Scott Perry, current on the Division of Water Resources list of licensed drillers and installers). Tennessee licenses the individual under the Water Well Act (TCA 69-10) and rule 0400-45-09; a water well driller license covers drilling, constructing, repairing and abandoning water wells, a pump installer license covers installing and servicing pumps, and a treatment installer license covers water treatment equipment on wells. Filed 15 well reports with TDEC since 2016 (10 new wells, 9 of them residential or farm supply; 5 wells backfilled and abandoned), most recently in June 2026, mostly in Robertson, Cheatham and Montgomery counties; the median depth of those wells is 160 feet.
What the Tennessee record says Perry Drilling is licensed or registered to do.
Setting a new submersible or jet pump with the pressure tank, switch and controls.
Tracking down low pressure, short cycling or no water, then repairing or replacing parts of the pump system.
Sizing and installing softeners, iron filters, UV and reverse osmosis based on a lab test.
Sealing an unused well to state standards so it cannot carry surface water down into the aquifer.
Drilling a new private well, setting the casing and grouting it the way state rules require.
Fixing casings, caps, pitless adapters and other parts of an existing well.
Based in Cheatham County, Tennessee. The state record lists 3 counties.
Approximate location (Cheatham County)Counties on the state record
Useful context before you call a contractor here.
National ranges to help you read a quote. They are not prices from Perry Drilling; ask for a written estimate.
National 2026 ranges. Sources, checked September 2026: HomeGuide cost guides, Angi.
Test your water before and after any work on the well.
Look up license 350 on the Tennessee state lookup and make sure it is active for the work you need. Open the Tennessee lookup.
Ask for the scope, parts, depth or pump size, permit fees and warranty in writing. Compare two or three quotes for big jobs.
New wells and many repairs are reported to the state. Ask who files the paperwork and for a copy of the well log.
Any work on a well can disturb bacteria. Test for coliform bacteria once the job is done.
Yes. The Tennessee record shows license 350 (well drilling and pump installation) with the status "active", last checked on September 29, 2026. You can confirm it on the state lookup.
The state record lists pump installation, pump repair, water treatment, well abandonment, well drilling and well repair. Call to confirm they take on your type of job.
The business is based in Cheatham County (Ashland City, TN). The state record lists 3 counties, including Robertson County, Cheatham County and Montgomery County.
Call (615) 792-3617 and email them. The address on the state record is 1077 Carney Winters Road, Ashland City, TN 37015.
License 1073, 1245, 1129 Active
License 866 Active
License 958, 1014 Active