Verified license

Norman Well Drilling

Dickson, TN · Dickson CountyWell drilling and pump installation

Call (615) 446-2545
DirectionsEmail
License status
Active
checked September 29, 2026
License number
1076
Tennessee record
Services
6
Pump Installation and more
Counties served
8
on the state record

About Norman Well Drilling

Norman Well Drilling is a well drilling and pump installation contractor based in Dickson, TN (Dickson County). The Tennessee licensing program lists license 1076 as active, and we last checked the record on September 29, 2026.

The state record covers pump installation, pump repair, water treatment, well abandonment, well drilling and well repair. It lists 8 counties where the business works, including Humphreys County, Hickman County and Stewart County.

This profile is built from public state license records checked on September 29, 2026. Well Water Insider does not rate or endorse contractors. Own this business? Claim the profile to add photos, hours and a description.

License record

Verified against state records
License number
1076
License type
Well drilling and pump installation
Status
Active
Last verified
September 29, 2026

Check this license yourself on the official Tennessee lookup.

What the state record says

Tennessee-licensed water well treatment installer, pump installer, water well driller, borehole only (TDEC license 1076, held by Michael Wayne Norman, current on the Division of Water Resources list of licensed drillers and installers). Tennessee licenses the individual under the Water Well Act (TCA 69-10) and rule 0400-45-09; a water well driller license covers drilling, constructing, repairing and abandoning water wells, a pump installer license covers installing and servicing pumps, and a treatment installer license covers water treatment equipment on wells. Filed 205 well reports with TDEC since 2016 (198 new wells, 201 of them residential or farm supply; 3 wells backfilled and abandoned), most recently in June 2026, mostly in Humphreys, Hickman and Stewart counties; the median depth of those wells is 200 feet.

Services

What the Tennessee record says Norman Well Drilling is licensed or registered to do.

Pump Installation

Setting a new submersible or jet pump with the pressure tank, switch and controls.

Pump Repair

Tracking down low pressure, short cycling or no water, then repairing or replacing parts of the pump system.

Water Treatment

Sizing and installing softeners, iron filters, UV and reverse osmosis based on a lab test.

Well Abandonment

Sealing an unused well to state standards so it cannot carry surface water down into the aquifer.

Well Drilling

Drilling a new private well, setting the casing and grouting it the way state rules require.

Well Repair

Fixing casings, caps, pitless adapters and other parts of an existing well.

Service area

Based in Dickson County, Tennessee. The state record lists 8 counties.

Approximate location (Dickson County)Counties on the state record

  • Humphreys County
  • Hickman County
  • Stewart County
  • Dickson County
  • Houston County
  • Benton County
  • Williamson County
  • Montgomery County

Well water in Dickson County

Useful context before you call a contractor here.

8%of households in Dickson County drink from a private well (est.)
140 to 260 feet; the median of 624 residential and farm wells reported to TDEC since 2000 is 200 feettypical private well depth
Not requiredwater test when a home with a well is sold in Tennessee
Open the Dickson County well guide

Typical costs for these services

National ranges to help you read a quote. They are not prices from Norman Well Drilling; ask for a written estimate.

Submersible pump replacement$1,200 to $4,500parts and labor
Pressure tank replacement$400 to $1,200installed
Whole-house treatment system$800 to $6,000softener, iron filter, UV, RO
New well drilled$5,500 to $25,000about $25 to $65 per foot
Shock chlorination$80 to $300or about $20 as a DIY job

Before you hire

  1. 1

    Confirm the license

    Look up license 1076 on the Tennessee state lookup and make sure it is active for the work you need. Open the Tennessee lookup.

  2. 2

    Get a written estimate

    Ask for the scope, parts, depth or pump size, permit fees and warranty in writing. Compare two or three quotes for big jobs.

  3. 3

    Ask about permits and the well log

    New wells and many repairs are reported to the state. Ask who files the paperwork and for a copy of the well log.

  4. 4

    Test the water after the work

    Any work on a well can disturb bacteria. Test for coliform bacteria once the job is done.

Questions about Norman Well Drilling

Is Norman Well Drilling licensed?

Yes. The Tennessee record shows license 1076 (well drilling and pump installation) with the status "active", last checked on September 29, 2026. You can confirm it on the state lookup.

What services does Norman Well Drilling offer?

The state record lists pump installation, pump repair, water treatment, well abandonment, well drilling and well repair. Call to confirm they take on your type of job.

What areas does Norman Well Drilling serve?

The business is based in Dickson County (Dickson, TN). The state record lists 8 counties, including Humphreys County, Hickman County, Stewart County, Dickson County and Houston County.

How do I contact Norman Well Drilling?

Call (615) 446-2545 and email them. The address on the state record is 1540 Hwy 47 E, Dickson, TN 37055.

Other licensed contractors near Dickson

Henry Drilling

Verified license

Franklin, TN · Maury County

License 958, 1014 Active

  • Geothermal
  • Pump Installation
  • Pump Repair
  • Water Treatment
  • Well Abandonment
  • Well Drilling
  • Well Repair