Verified license

Bj Burks/H20 Well Drilling

Dyersburg, TN · Dyer CountyWell drilling and pump installation

Call (731) 589-0117
DirectionsEmail
License status
Active
checked September 29, 2026
License number
651
Tennessee record
Services
7
Geothermal and more
Counties served
1
on the state record

About Bj Burks/H20 Well Drilling

Bj Burks/H20 Well Drilling is a well drilling and pump installation contractor based in Dyersburg, TN (Dyer County). The Tennessee licensing program lists license 651 as active, and we last checked the record on September 29, 2026.

The state record covers geothermal, pump installation, pump repair, water treatment, well abandonment, well drilling and well repair. It lists 1 county where the business works, including Gibson County.

This profile is built from public state license records checked on September 29, 2026. Well Water Insider does not rate or endorse contractors. Own this business? Claim the profile to add photos, hours and a description.

License record

Verified against state records
License number
651
License type
Well drilling and pump installation
Status
Active
Last verified
September 29, 2026

Check this license yourself on the official Tennessee lookup.

What the state record says

Tennessee-licensed water well treatment installer, pump installer, water well driller, geothermal well driller (TDEC license 651, held by William Burks, current on the Division of Water Resources list of licensed drillers and installers). Tennessee licenses the individual under the Water Well Act (TCA 69-10) and rule 0400-45-09; a water well driller license covers drilling, constructing, repairing and abandoning water wells, a pump installer license covers installing and servicing pumps, and a treatment installer license covers water treatment equipment on wells. Filed 1 well report with TDEC since 2016 (0 new wells; 1 wells backfilled and abandoned), most recently in March 2022, mostly in Gibson County.

Services

What the Tennessee record says Bj Burks/H20 Well Drilling is licensed or registered to do.

Geothermal

Drilling closed-loop boreholes for ground-source heat pumps.

Pump Installation

Setting a new submersible or jet pump with the pressure tank, switch and controls.

Pump Repair

Tracking down low pressure, short cycling or no water, then repairing or replacing parts of the pump system.

Water Treatment

Sizing and installing softeners, iron filters, UV and reverse osmosis based on a lab test.

Well Abandonment

Sealing an unused well to state standards so it cannot carry surface water down into the aquifer.

Well Drilling

Drilling a new private well, setting the casing and grouting it the way state rules require.

Well Repair

Fixing casings, caps, pitless adapters and other parts of an existing well.

Service area

Based in Dyer County, Tennessee. The state record lists 1 county.

Approximate location (Dyer County)Counties on the state record

  • Gibson County

Well water in Dyer County

Useful context before you call a contractor here.

4%of households in Dyer County drink from a private well (est.)
90 to 160 feet; the median of 306 residential and farm wells reported to TDEC since 2000 is 120 feettypical private well depth
Not statewidewater test when a home with a well is sold: no statewide rule in Tennessee
Open the Dyer County well guide

Typical costs for these services

National ranges to help you read a quote. They are not prices from Bj Burks/H20 Well Drilling; ask for a written estimate.

Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

National 2026 ranges. Sources, checked September 2026: HomeGuide cost guides, Angi.

Certified labs nearby

Test your water before and after any work on the well.

Waypoint Analytical, LLC (Jackson)Jackson, TN · 42.5 miEurofins MemphisMemphis, TN · 65 miEnvironmental Analysis SouthJackson, MO · 91 mi
All labs near here

Before you hire

  1. 1

    Confirm the license

    Look up license 651 on the Tennessee state lookup and make sure it is active for the work you need. Open the Tennessee lookup.

  2. 2

    Get a written estimate

    Ask for the scope, parts, depth or pump size, permit fees and warranty in writing. Compare two or three quotes for big jobs.

  3. 3

    Ask about permits and the well log

    New wells and many repairs are reported to the state. Ask who files the paperwork and for a copy of the well log.

  4. 4

    Test the water after the work

    Any work on a well can disturb bacteria. Test for coliform bacteria once the job is done.

Questions about Bj Burks/H20 Well Drilling

Is Bj Burks/H20 Well Drilling licensed?

Yes. The Tennessee record shows license 651 (well drilling and pump installation) with the status "active", last checked on September 29, 2026. You can confirm it on the state lookup.

What services does Bj Burks/H20 Well Drilling offer?

The state record lists geothermal, pump installation, pump repair, water treatment, well abandonment, well drilling and well repair. Call to confirm they take on your type of job.

What areas does Bj Burks/H20 Well Drilling serve?

The business is based in Dyer County (Dyersburg, TN). The state record lists 1 county, including Gibson County.

How do I contact Bj Burks/H20 Well Drilling?

Call (731) 589-0117 and email them. The address on the state record is 225 Parker Road, Dyersburg, TN 38024.

Other licensed contractors near Dyersburg