Kentucky county well guide

Well Water in Fulton County, KY: Testing, Contractors and Rules

About 75 households in Fulton County, 3% of the county, rely on a private well. Nobody tests that water unless the owner does.

Labs within 40 milesLicensed contractors
3%of households on a private well
Share on wells, county vs state
Fulton County3%
Kentucky average10%
4licensed contractors serve the county
40+ mito a certified lab; mail-in kits recommended
Nostatewide test required when a home is sold

Most of Fulton County is on public water, but an estimated 75 households still rely on a private well. This page covers the rules, labs and licensed contractors that serve them.

Local rules for wells in Fulton County

Private wells in Fulton County follow Kentucky's statewide rules, administered by Kentucky Division of Water, Groundwater Section. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though lenders often ask for one. The cards below show the details and the official sources.

At a glance

Water test for a new wellNot required statewide

No statewide water test and no permit or fee for a household well. All work on a well, including plugging it, must be done by a Kentucky certified water well driller to the 401 KAR 6:310 construction standards (grouted casing, sanitary well cap, 50 ft from a septic tank and 70 ft from a drainfield), and the driller must file the well record with the Division of Water and give you a copy within 60 days. A few local health departments ask for a bacteria sample on a new well; lenders usually do.

Water test when a home is soldNot required statewide

No statewide requirement. The Kentucky seller's disclosure form asks whether the water source is a well, spring or cistern and whether there are known problems, nothing more. FHA, VA and USDA loans normally require a bacteria, nitrate and lead sample from a certified lab before closing.

What the state recommends

The Division of Water recommends testing a private well, spring or cistern every year for coliform bacteria, and every few years for nitrate, pH, hardness, iron, manganese, lead and copper. Add arsenic in the Jackson Purchase and western coal field, hydrogen sulfide and metals in the eastern coal field, radon in the Bluegrass and Pennyroyal limestone, and test again after flooding, well work or a change in taste, color or smell. Karst wells and springs in the Pennyroyal and Bluegrass should be retested after heavy rain.

Free or low-cost testingAvailable

No statewide free program. Most county and district health departments will collect a private well or cistern sample and send it to the state Division of Laboratory Services in Frankfort for total coliform and E. coli, for a sampling fee of about $50; call the environmental office of your local health department to schedule. UK Cooperative Extension offices run periodic screening events in some counties.

Getting your water tested near Fulton County

No state-certified lab sits within 40 miles of the center of Fulton County. That is common in rural Kentucky, and the practical answer is a mail-in kit: the lab ships bottles, you sample at the kitchen tap and ship them back cold. The finder below widens the search to the whole state.

No listings yet for this area. Try widening your search.

Licensed well contractors serving Fulton County

4 licensed contractors serve Fulton County, including Beanland & Sons Drilling LLC and Brute LLC. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

Wells in Fulton County typically reach 100 to 140 feet; the median of 111 household wells in the Kentucky Groundwater Data Repository drilled since 1990 is 120 feet. What comes up with the water depends on the aquifer, and across Kentucky the usual suspects are coliform bacteria (the most common failure statewide, worst in karst limestone wells and springs that draw surface water after rain), nitrate (shallow wells in farm country and the purchase), iron and manganese (coal fields and the jackson purchase). A first full panel tells you which of them apply to your well.

Typical well depth

100 to 140 feet; the median of 111 household wells in the Kentucky Groundwater Data Repository drilled since 1990 is 120 feet

Contaminants to test for
  • Coliform bacteria (the most common failure statewide
  • Worst in karst limestone wells and springs that draw surface water after rain)
  • Nitrate (shallow wells in farm country and the Purchase)
  • Iron and manganese (coal fields and the Jackson Purchase)
  • Hydrogen sulfide and methane (shale and coal-bearing rock in the eastern and western coal fields)
  • Hardness (limestone across the Bluegrass and Pennyroyal)
  • Acidic corrosive water that pulls lead and copper from plumbing (coal field wells)
  • Arsenic (locally in western Kentucky)
  • Radon (locally in limestone and black shale)
  • Pesticides (shallow Purchase wells)
  • PFAS near airfields and industrial sites

Neighboring counties: Hickman County, Carlisle County, Graves County, Ballard County.

What well work costs in Fulton County

Basic bacteria and nitrate test$25 to $75lab fee, homeowner sample
Full panel lab test$150 to $400metals, VOCs, radiologicals
Well inspection$250 to $550flow, pressure, visual, water test
Submersible pump replacement$1,200 to $4,500parts and labor
Pressure tank replacement$400 to $1,200installed
Whole-house treatment system$800 to $6,000softener, iron filter, UV, RO
New well drilled$5,500 to $25,000about $25 to $65 per foot
Shock chlorination$80 to $300or about $20 as a DIY job

National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.

Questions Fulton County well owners ask

How many homes in Fulton County are on a well?

About 75, or 3% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.

Where is the closest certified lab to Fulton County?

There is no certified lab within 40 miles. Use a mail-in kit from a Kentucky certified lab, or the county health department if it collects samples.

Do I need a permit to drill a well in Fulton County?

No statewide water test and no permit or fee for a household well. All work on a well, including plugging it, must be done by a Kentucky certified water well driller to the 401 KAR 6:310 construction standards (grouted casing, sanitary well cap, 50 ft from a septic tank and 70 ft from a drainfield), and the driller must file the well record with the Division of Water and give you a copy within 60 days. A few local health departments ask for a bacteria sample on a new well; lenders usually do.

What does a well test cost near Fulton County?

A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. Mail-in kits cost about the same as walking in.