Kentucky county well guide

Well Water in Russell County, KY: Testing, Contractors and Rules

About 7,500 people in Russell County, 43% of residents, get their water from a private well. Nobody tests that water unless the owner does.

43%of residents on a private well
Share on private wells
Russell County43%
Kentucky12%
6licensed contractors within 60 miles of the county
65 mito the nearest certified lab that takes homeowner samples, Tennessee Tech University Water Center
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010, and state well records. Labs and contractors: state certification and license lists.

About 7,500 people in Russell County, 43% of residents, rely on a private well, according to a 2010 U.S. Geological Survey estimate. That is well above the Kentucky figure of 12%. State well records list 114 household wells in the Kentucky Groundwater Data Repository drilled since 1990, with a median depth of 100 feet. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Russell County

Private wells in Russell County follow Kentucky's statewide rules, administered by the Kentucky Division of Water, Groundwater Section. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.

At a glance

Water test for a new wellNot required statewide

No statewide water test, permit or fee. Some local health departments ask for a bacteria sample before the well is used, and some lenders do.

Water test when a home is soldNot required statewide

No statewide requirement. The seller's disclosure only asks if the water comes from a well, spring or cistern. Some lenders require a water test before closing.

What the state recommends

Coliform bacteria every year. Nitrate, pH, hardness, iron, manganese, lead and copper every few years. Retest karst wells and springs after heavy rain. See the full list by region below.

Free or low-cost testingAvailable

No free statewide program. Most county and district health departments collect a bacteria sample for a fee and send it to the state lab in Frankfort.

Getting your water tested near Russell County

No state-certified lab sits within 40 miles of Russell County, which is common in rural Kentucky. To give you options anyway, the list below shows the 7 closest certified labs, 61 to 73 miles away, with the distance on each one. The nearest that takes samples from homeowners is Tennessee Tech University Water Center in Cookeville, about 65 miles away. At that distance a mail-in kit is the practical route: the lab ships bottles, you sample at the cold kitchen tap and send them back the same day with an ice pack.

Licensed well contractors serving Russell County

No licensed contractor lists Russell County as a home base or service area yet. To give you more choice, the list below shows the 6 licensed Kentucky contractors within 60 miles of the county, nearest first. Most drillers and pump installers travel well beyond their home county, so call and ask whether they cover your address.

Well depth and water chemistry

In state well records, the median household well in Russell County is 100 feet deep, and the middle half run 80 to 120 feet (114 household wells in the Kentucky Groundwater Data Repository drilled since 1990). Contaminants worth testing for in this part of Kentucky include coliform bacteria, nitrate, iron and manganese, and hydrogen sulfide and methane. A first full panel tells you which of them apply to your well.

Typical well depth
Median well100 ft
Most wells80 to 120 ft
Based on114 wells

Household wells in the Kentucky Groundwater Data Repository drilled since 1990. "Most wells" is the middle half.

Contaminants to test for
  • Coliform bacteriaThe most common failure statewide, worst in karst limestone wells and springs that draw surface water after rain
  • NitrateShallow wells in farm country and the Purchase
  • Iron and manganeseCoal fields and the Jackson Purchase
  • Hydrogen sulfide and methaneShale and coal-bearing rock in the eastern and western coal fields
  • HardnessLimestone across the Bluegrass and Pennyroyal
  • Acidic corrosive water that pulls lead and copper from plumbingCoal field wells
  • ArsenicLocally in western Kentucky
  • RadonLocally in limestone and black shale
  • PesticidesShallow Purchase wells
  • PFAS near airfields and industrial sites

Neighboring counties: Adair County, Wayne County, Casey County, Clinton County.

Typical well costs: Kentucky lab fees and national price ranges

Bacteria test (coliform and E. coli)$50published Kentucky lab fees
Nitrate test$10 to $80varies by lab; ask when you order
Broad panel (metals and minerals)$85 to $450state and university lab packages
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: State lab sampling fee through the local health department (bacteria only); private labs set their own nitrate prices. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Oldham County Health Department, Lincoln Trail District Health Department, HomeGuide cost guides, Angi: cost to shock a well.

Questions Russell County well owners ask

How many people in Russell County use a private well?

The U.S. Geological Survey estimates about 7,500 people, 43% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data. State well records add a second view: 114 household wells in the Kentucky Groundwater Data Repository drilled since 1990.

Where is the closest certified lab to Russell County?

Tennessee Tech University Water Center in Cookeville, about 65 miles from the county's population center. It says it accepts samples from homeowners. Nothing is closer than 40 miles, so ask about mail-in kits.

Do I need a permit to drill a well in Russell County?

No statewide water test, permit or fee. Some local health departments ask for a bacteria sample before the well is used, and some lenders do.

What does a well test cost near Russell County?

Published lab fees in Kentucky: $50 for a bacteria test (Oldham County Health Department, Lincoln Trail District Health Department). Mail-in kits cost about the same as walking in.