Missouri county well guide

Well Water in Adair County, MO: Testing, Contractors and Rules

About 760 people in Adair County, 3% of residents, get their water from a private well. Nobody tests that water unless the owner does.

3%of residents on a private well
Share on private wells
Adair County3%
Missouri15%
6licensed contractors within 60 miles of the county
114 mito the nearest certified lab that takes homeowner samples, Missouri State Public Health Laboratory
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.

Private wells serve a minority in Adair County: about 760 people, 3% of residents, by the U.S. Geological Survey's 2010 estimate, below the Missouri figure of 15%. If yours is one of them, testing and upkeep are up to you.

Local rules for wells in Adair County

The rules that apply in Adair County are set at the state level in Missouri. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.

At a glance

Water test for a new wellNot required statewide

No permit for the owner, but the well must be built by a Missouri permitted well installation contractor to the 10 CSR 23-3 standards for its drilling area (Missouri has 13 drilling areas with different minimum casing depths, grouted casing, and setback distances from septic tanks, lateral fields and lagoons), and the contractor must disinfect the well and file a well certification report with the Missouri Geological Survey. The State Public Health Laboratory's New Well Series (pH, fluoride, chloride, nitrate, sulfate, iron, manganese and lead) is the usual chemistry check on a new well.

Water test when a home is soldNot required statewide

No statewide requirement. The Missouri seller's disclosure asks only whether the water supply is a private well and whether the seller knows of problems. Some lenders require a water test before closing.

What the state recommends

The Department of Health and Senior Services recommends testing a private well every year for coliform bacteria, and every few years for nitrate, pH, hardness, iron, manganese, lead and copper (the State Public Health Laboratory's minerals, nutrients and metals panel covers all of these plus arsenic and uranium). Add radon and radium in the Ozarks, lead and cadmium in the Old Lead Belt and Viburnum Trend mining districts, sulfate and chloride in deep northern wells, pesticides in shallow Bootheel wells, and test again after flooding, well work or a change in taste, color or smell. Karst wells and springs in the Ozarks should be retested after heavy rain.

Free or low-cost testingAvailable

No free program, but one of the cheapest state bacteria tests in the country: the State Public Health Laboratory tests a private well or cistern sample for total coliform and E. coli for a $10 handling fee. Pick up the kit from your local public health agency or district health office, collect the sample and hand it back for the lab's free statewide overnight courier. Chemistry panels cost more and are ordered through the same agency or the Bureau of Environmental Epidemiology (573-751-6102).

Getting your water tested near Adair County

No state-certified lab sits within 40 miles of Adair County, which is common in rural Missouri. To give you options anyway, the list below shows the 6 closest certified labs, 86 to 144 miles away, with the distance on each one. The nearest that takes samples from homeowners is Missouri State Public Health Laboratory in Jefferson City, about 114 miles away. At that distance a mail-in kit is the practical route: the lab ships bottles, you sample at the cold kitchen tap and send them back the same day with an ice pack.

Licensed well contractors serving Adair County

No licensed contractor lists Adair County as a home base or service area yet. To give you more choice, the list below shows the 6 licensed Missouri contractors within 60 miles of the county, nearest first. Most drillers and pump installers travel well beyond their home county, so call and ask whether they cover your address.

Well depth and water chemistry

We have no county-level well records for Adair County yet. Statewide, county medians of domestic wells certified to the Missouri Geological Survey since 2000: about 240 to 390 ft in the Ozark dolomite of southern and central Missouri; 430 to 660 ft on the Springfield Plateau in the southwest; 440 to 600 ft around St. Louis and in the counties along the Missouri River; 40 to 120 ft in the glacial till of northwest Missouri, where yields are small and many homes are on rural water districts; 80 to 160 ft in the Bootheel. Contaminants worth testing for in this part of Missouri include coliform bacteria, nitrate, hardness, and iron and manganese. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Coliform bacteriaThe most common failure statewide, worst in Ozark karst wells and springs after rain
  • NitrateShallow wells in farm country, the Bootheel and northern Missouri
  • HardnessDolomite across the Ozarks
  • Iron and manganeseGlacial till, alluvium and Bootheel sands
  • Radon and radiumLocally in the Ozark aquifer
  • Lead
  • Cadmium and zincOld Lead Belt, Viburnum Trend and Tri-State mining districts
  • Sulfate
  • Chloride and sodiumDeep bedrock wells in northern and western Missouri
  • ArsenicLocally
  • PesticidesShallow Bootheel and river-bottom wells
  • PFAS near airfields and industrial sites

Neighboring counties: Schuyler County, Knox County, Sullivan County, Macon County.

Typical well costs: Missouri lab fees and national price ranges

Bacteria test (coliform and E. coli)$10published Missouri lab fees
Nitrate test$10 to $80varies by lab; ask when you order
Broad panel (metals and minerals)$85 to $450state and university lab packages
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: State Public Health Laboratory bacteria kit from any local health department ($10 handling fee). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Missouri State Public Health Laboratory, HomeGuide cost guides, Angi: cost to shock a well.

Questions Adair County well owners ask

How many people in Adair County use a private well?

The U.S. Geological Survey estimates about 760 people, 3% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.

Where is the closest certified lab to Adair County?

Missouri State Public Health Laboratory in Jefferson City, about 114 miles from the county's population center. It says it accepts samples from homeowners. Nothing is closer than 40 miles, so ask about mail-in kits.

Do I need a permit to drill a well in Adair County?

No permit for the owner, but the well must be built by a Missouri permitted well installation contractor to the 10 CSR 23-3 standards for its drilling area (Missouri has 13 drilling areas with different minimum casing depths, grouted casing, and setback distances from septic tanks, lateral fields and lagoons), and the contractor must disinfect the well and file a well certification report with the Missouri Geological Survey. The State Public Health Laboratory's New Well Series (pH, fluoride, chloride, nitrate, sulfate, iron, manganese and lead) is the usual chemistry check on a new well.

What does a well test cost near Adair County?

Published lab fees in Missouri: $10 for a bacteria test (Missouri State Public Health Laboratory). Mail-in kits cost about the same as walking in.