Alabama county well guide

Well Water in Monroe County, AL: Testing, Contractors and Rules

About 5,100 people in Monroe County, 22% of residents, get their water from a private well. Nobody tests that water unless the owner does.

22%of residents on a private well
Share on private wells
Monroe County22%
Alabama11%
3licensed contractors serve the county
72 mito the nearest certified lab that takes homeowner samples, Alabama Department of Public Health Bureau of Clinical Laboratories, Mobile Branch
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.

About 5,100 people in Monroe County, 22% of residents, rely on a private well, according to a 2010 U.S. Geological Survey estimate. That is well above the Alabama figure of 11%. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Monroe County

Private wells in Monroe County follow Alabama's statewide rules, administered by the Alabama Department of Environmental Management, Water Well Standards Program. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.

At a glance

Water test for a new wellNot required statewide

No statewide water test and no state permit for the owner. The Water Well Standards Act requires the well to be drilled by an ADEM-licensed water well driller to the 335-9 construction standards (including a sanitary seal; ADEM recommends setbacks such as 100 feet from a septic tank or field lines, and local rules may require them), and the driller must notify ADEM before drilling and file a well completion report afterward. The driller is required to disinfect the new well.

Water test when a home is soldNot required statewide

No statewide requirement. Alabama is a caveat emptor state with no mandatory seller's disclosure form, so nothing about the well has to be disclosed unless the buyer asks. Some lenders require a water test before closing.

What the state recommends

The Department of Public Health and the Alabama Private Well Program at Auburn recommend testing a private well every year, preferably in spring, for coliform bacteria, and every few years for nitrate, pH, hardness, iron, manganese, lead and copper (Auburn's W1 Total Water Analysis covers the chemistry). Add radon in the Piedmont, arsenic in the Black Belt and coastal plain, chloride and sodium near the coast and in deep Black Belt wells, PFAS in the Tennessee Valley around Decatur and near airfields, and test again after flooding, well work or a change in taste, color or smell.

Free or low-cost testingAvailable

No statewide free program, but two cheap routes. Every county health department sells the Department of Public Health bacteria kit (total coliform and E. coli, a few dollars per sample, results in a few days from the Mobile or Prattville branch laboratory), and any county Extension office will take a sample for Auburn University's W1 Total Water Analysis for a small fee, with the county agent explaining the result. The Alabama Private Well Program at Auburn (888-844-4785) runs periodic free screening events.

Getting your water tested near Monroe County

No state-certified lab sits within 40 miles of Monroe County, which is common in rural Alabama. To give you options anyway, the list below shows the 7 closest certified labs, 62 to 86 miles away, with the distance on each one. The nearest that takes samples from homeowners is Alabama Department of Public Health Bureau of Clinical Laboratories, Mobile Branch in Mobile, about 72 miles away. At that distance a mail-in kit is the practical route: the lab ships bottles, you sample at the cold kitchen tap and send them back the same day with an ice pack.

Licensed well contractors serving Monroe County

3 licensed contractors list Monroe County as a home base or service area, including Powell Well Drilling and Rose’s Well Drilling. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

We have no county-level well records for Monroe County yet. Statewide, depth varies widely across the state; logs of nearby wells are the best guide. Black Belt wells have to be drilled through the chalk to reach the Eutaw and Gordo sands, and karst in north Alabama makes depth and yield unpredictable. Contaminants worth testing for in this part of Alabama include coliform bacteria, iron and manganese, acidic corrosive water that pulls lead and copper from plumbing, and hardness. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Coliform bacteriaThe most common failure statewide, worst in north Alabama karst wells and shallow Coastal Plain wells
  • Iron and manganeseCoastal Plain sands and the Plateau, nearly universal
  • Acidic corrosive water that pulls lead and copper from plumbingPiedmont and Coastal Plain sands
  • HardnessLimestone across north Alabama
  • NitrateShallow wells in the Wiregrass, Sand Mountain poultry country and farm bottoms
  • Hydrogen sulfideDeeper Coastal Plain and Black Belt wells
  • Radon and uraniumPiedmont granite
  • ArsenicLocally in the Black Belt and coastal plain
  • Saltwater and chlorideBaldwin and Mobile counties near the coast, deep Black Belt wells
  • PFASTennessee River corridor around Decatur and near airfields

Neighboring counties: Conecuh County, Clarke County, Escambia County, Wilcox County.

Typical well costs: Alabama lab fees and national price ranges

Bacteria test (coliform and E. coli)$15published Alabama lab fees
Nitrate test$25published Alabama lab fees
Broad panel (metals and minerals)$85 to $450state and university lab packages
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: County health department bacteria test ($30 more if staff collect it); nitrate is an Auburn University screening, not a certified test. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: ADPH Houston County, Auburn University Water Resources Center, HomeGuide cost guides, Angi: cost to shock a well.

Questions Monroe County well owners ask

How many people in Monroe County use a private well?

The U.S. Geological Survey estimates about 5,100 people, 22% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.

Where is the closest certified lab to Monroe County?

Alabama Department of Public Health Bureau of Clinical Laboratories, Mobile Branch in Mobile, about 72 miles from the county's population center. It says it accepts samples from homeowners. Nothing is closer than 40 miles, so ask about mail-in kits.

Do I need a permit to drill a well in Monroe County?

No statewide water test and no state permit for the owner. The Water Well Standards Act requires the well to be drilled by an ADEM-licensed water well driller to the 335-9 construction standards (including a sanitary seal; ADEM recommends setbacks such as 100 feet from a septic tank or field lines, and local rules may require them), and the driller must notify ADEM before drilling and file a well completion report afterward. The driller is required to disinfect the new well.

What does a well test cost near Monroe County?

Published lab fees in Alabama: $15 for a bacteria test and $25 for nitrate (ADPH Houston County, Auburn University Water Resources Center). The low-cost nitrate option is a screening, not a certified test. Mail-in kits cost about the same as walking in.