Alabama county well guide

Well Water in Perry County, AL: Testing, Contractors and Rules

About 1,688 households in Perry County, 44% of the county, rely on a private well. Nobody tests that water unless the owner does.

Labs within 40 milesLicensed contractors
44%of households on a private well
Share on wells, county vs state
Perry County44%
Alabama average11%
3licensed contractors serve the county
40+ mito a certified lab; mail-in kits recommended
Nostatewide test required when a home is sold

Most homes in Perry County are on a private well: about 1,688 households, 44% of the county. That makes Perry County one of the places in Alabama where the water department is the homeowner.

Local rules for wells in Perry County

Private wells in Perry County follow Alabama's statewide rules, administered by Alabama Department of Environmental Management, Water Well Standards Program. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though lenders often ask for one. The cards below show the details and the official sources.

At a glance

Water test for a new wellNot required statewide

No statewide water test and no state permit for the owner. The Water Well Standards Act requires the well to be drilled by an ADEM-licensed water well driller to the 335-9 construction standards (grouted casing, sanitary seal, setbacks from septic tanks, drainfields and other contamination sources), and the driller must notify ADEM before drilling and file a well completion report afterward. The driller is required to disinfect the new well; a few county health departments ask for a bacteria sample before a well serves a new home, and lenders usually do.

Water test when a home is soldNot required statewide

No statewide requirement. Alabama is a caveat emptor state with no mandatory seller's disclosure form, so nothing about the well has to be disclosed unless the buyer asks. FHA, VA and USDA loans normally require a bacteria, nitrate and lead sample from a certified lab before closing.

What the state recommends

The Department of Public Health and the Alabama Private Well Program at Auburn recommend testing a private well every year, preferably in spring, for coliform bacteria, and every few years for nitrate, pH, hardness, iron, manganese, lead and copper (Auburn's W1 Total Water Analysis covers the chemistry). Add radon in the Piedmont, arsenic in the Black Belt and coastal plain, chloride and sodium near the coast and in deep Black Belt wells, PFAS in the Tennessee Valley around Decatur and near airfields, and test again after flooding, well work or a change in taste, color or smell.

Free or low-cost testingAvailable

No statewide free program, but two cheap routes. Every county health department sells the Department of Public Health bacteria kit (total coliform and E. coli, a few dollars per sample, results in a few days from the Mobile or Prattville branch laboratory), and any county Extension office will take a sample for Auburn University's W1 Total Water Analysis for a small fee, with the county agent explaining the result. The Alabama Private Well Program at Auburn (888-844-4785) runs periodic free screening events.

Getting your water tested near Perry County

No state-certified lab sits within 40 miles of the center of Perry County. That is common in rural Alabama, and the practical answer is a mail-in kit: the lab ships bottles, you sample at the kitchen tap and ship them back cold. The finder below widens the search to the whole state.

No listings yet for this area. Try widening your search.

Licensed well contractors serving Perry County

3 licensed contractors serve Perry County, including CDI/Commercial Drilling Inc and Commercial Drilling, Inc (Cdi). Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

Wells in Perry County typically reach 100 to 400 ft in the sands of the Coastal Plain across the southern half of the state, deeper (300 to 800 ft) where the Black Belt's chalk has to be drilled through to reach the Eutaw and Gordo sands; 100 to 400 ft in the fractured granite, gneiss and schist of the east-central Piedmont, where yields are modest; 50 to 300 ft in the limestone, sandstone and shale of the Tennessee Valley, Cumberland Plateau and Valley and Ridge in north Alabama, where karst makes depth and yield unpredictable. What comes up with the water depends on the aquifer, and across Alabama the usual suspects are coliform bacteria (the most common failure statewide, worst in north alabama karst wells and shallow coastal plain wells), iron and manganese (coastal plain sands and the plateau, nearly universal). A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Coliform bacteria (the most common failure statewide
  • Worst in north Alabama karst wells and shallow Coastal Plain wells)
  • Iron and manganese (Coastal Plain sands and the Plateau
  • Nearly universal)
  • Acidic corrosive water that pulls lead and copper from plumbing (Piedmont and Coastal Plain sands)
  • Hardness (limestone across north Alabama)
  • Nitrate (shallow wells in the Wiregrass
  • Sand Mountain poultry country and farm bottoms)
  • Hydrogen sulfide (deeper Coastal Plain and Black Belt wells)
  • Radon and uranium (Piedmont granite)
  • Arsenic (locally in the Black Belt and coastal plain)
  • Saltwater and chloride (Baldwin and Mobile counties near the coast
  • Deep Black Belt wells)
  • PFAS (Tennessee River corridor around Decatur and near airfields)

Neighboring counties: Hale County, Dallas County, Marengo County, Bibb County.

What well work costs in Perry County

Bacteria test (coliform and E. coli)$15published Alabama lab fees
Nitrate test$25published Alabama lab fees
Broad panel (metals and minerals)$85 to $450state and university lab packages
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

County health department bacteria test ($30 more if staff collect it); nitrate is an Auburn University screening, not a certified test. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: ADPH Houston County, Auburn University Water Resources Center, HomeGuide cost guides, Angi: cost to shock a well.

Questions Perry County well owners ask

How many homes in Perry County are on a well?

About 1,688, or 44% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.

Where is the closest certified lab to Perry County?

There is no certified lab within 40 miles. Use a mail-in kit from a Alabama certified lab, or the county health department if it collects samples.

Do I need a permit to drill a well in Perry County?

No statewide water test and no state permit for the owner. The Water Well Standards Act requires the well to be drilled by an ADEM-licensed water well driller to the 335-9 construction standards (grouted casing, sanitary seal, setbacks from septic tanks, drainfields and other contamination sources), and the driller must notify ADEM before drilling and file a well completion report afterward. The driller is required to disinfect the new well; a few county health departments ask for a bacteria sample before a well serves a new home, and lenders usually do.

What does a well test cost near Perry County?

Published lab fees in Alabama: $15 for a bacteria test and $25 for nitrate. County health department bacteria test ($30 more if staff collect it); nitrate is an Auburn University screening, not a certified test. Mail-in kits cost about the same as walking in.