Community Environmental Laboratories, Inc
Homeowner samples
- Coliform Bacteria
- Lead
- Nitrate / Nitrite
About 9,300 people in Kent County, 46% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.
About 9,300 people in Kent County, 46% of residents, rely on a private well, according to a 2010 U.S. Geological Survey estimate. That is the 5th highest share in Maryland. Nobody tests, treats or inspects that water unless the owner does.
Private wells in Kent County follow Maryland's statewide rules, administered by the Maryland Department of the Environment, Water Supply Program. A water test is required when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.
Yes. A well construction permit from the county health department is required before drilling, the well must be built by a Maryland licensed well driller to COMAR 26.04.04 (grouted casing, 100 ft from a septic tank or drainfield, or 50 ft where the well draws from a confined aquifer, minimum yields by use), and before the house can be occupied the county issues a certificate of potability based on a sample from an MDE-certified lab that passes the county's potability tests, usually bacteria plus a chemical panel. Several counties add tests (Anne Arundel, for example, requires two consecutive passing bacteria tests, one chemical test, and radionuclide, arsenic and cadmium tests where applicable). The driller files the well completion report with the county.
No statewide requirement. Maryland's residential disclosure asks about the water supply and known problems, and a few counties require a bacteria test or a yield test when a property on a well changes hands (check the county health department). Some lenders require a water test before closing.
University of Maryland Extension and MDE recommend testing a private well every year for coliform bacteria and nitrate, and every three years for pH, hardness, iron, manganese, lead, copper and total dissolved solids. Add arsenic and radium in the Coastal Plain (the Aquia and Patuxent aquifers under Anne Arundel, Calvert, Prince George's and the Eastern Shore), radon and uranium in the Piedmont, PFAS near Patuxent River, Fort Meade and other airfields, chloride and sodium on the lower Eastern Shore, and test again after flooding, well work or a change in taste, color or smell.
No free program. The county health departments do not run labs but will tell you which certified labs serve the county, and several commercial labs on the MDE list (Water Testing Labs of MD, Home Land Labs, Fredericktowne Labs, Certified Water Testing, Chesapeake Environmental) are built around homeowner samples and run the potability panel. University of Maryland Extension's Wells and Septic Systems program runs periodic free screening clinics.
For a homeowner test, start with Community Environmental Laboratories, Inc in Aberdeen (about 21 miles from the county's population center), the closest certified lab that accepts private well samples. The cards below list every certified lab within 40 miles and which tests each is certified for.
13 certified labs within 40 miles of this county
Homeowner samples
Homeowner samples
Homeowner samples
Homeowner samples
Only one licensed contractor lists Kent County as a home base or service area: Delmarva Water Solutions. To give you more choice, the list below shows the 87 licensed Maryland contractors within 60 miles of the county, nearest first. Most drillers and pump installers travel well beyond their home county, so call and ask whether they cover your address.
87 licensed contractors within 60 miles of this county
License 4636 Active
License PI0171, PI0197 Active
License 2352 Active
License PI0180, PI0090, WCI181, WCI060 Active
License MWD368 Active
License MSD254, JSD177, MSD248, MSD066, MWD355, MSD162, MSD247, JSD176, PI0200, WCI196 Active
License PI0192, WCI188 Active
License MWD304, MWD509, MWD554 Active
License MWD601, MWD584, JGD102, MGD164, MGD115 Active
License MWD047, MSD137 Active
License 3052 Active
License 1703 Active
We have no county-level well records for Kent County yet. Statewide, depth varies widely across the state: fractured crystalline rock in the Piedmont (Montgomery, Howard, Baltimore, Carroll and eastern Frederick counties), where yields are modest and a dry hole is possible; stacked sand aquifers in the Coastal Plain of the Eastern Shore and Southern Maryland; limestone and sandstone in the Hagerstown Valley and the western mountains. Logs of nearby wells, held by the county health department, are the best guide. Contaminants worth testing for in this part of Maryland include coliform bacteria, nitrate, arsenic, and radium. A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Queen Anne's County, Harford County, Cecil County, Caroline County.
Lab fees: Maryland state lab fees; a county health department may add a collection fee ($50 in Frederick County). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Maryland Department of Health lab fees, Frederick County Health Department, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 9,300 people, 46% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.
Community Environmental Laboratories, Inc in Aberdeen, about 21 miles from the county's population center. It says it accepts samples from homeowners.
Yes. A well construction permit from the county health department is required before drilling, the well must be built by a Maryland licensed well driller to COMAR 26.04.04 (grouted casing, 100 ft from a septic tank or drainfield, or 50 ft where the well draws from a confined aquifer, minimum yields by use), and before the house can be occupied the county issues a certificate of potability based on a sample from an MDE-certified lab that passes the county's potability tests, usually bacteria plus a chemical panel. Several counties add tests (Anne Arundel, for example, requires two consecutive passing bacteria tests, one chemical test, and radionuclide, arsenic and cadmium tests where applicable). The driller files the well completion report with the county.
Published lab fees in Maryland: $41 for a bacteria test and $18 for nitrate (Maryland Department of Health lab fees, Frederick County Health Department). Mail-in kits cost about the same as walking in.