Water Testing Labs of MD – Salisbury
Homeowner samples
- Coliform Bacteria
About 23,402 households in Wicomico County, 57% of the county, rely on a private well. Nobody tests that water unless the owner does.
Most homes in Wicomico County are on a private well: about 23,402 households, 57% of the county. That makes Wicomico County one of the places in Maryland where the water department is the homeowner.
Private wells in Wicomico County follow Maryland's statewide rules, administered by Maryland Department of the Environment, Water Supply Program. A water test is required when a new well is completed. There is no statewide test requirement when a home is sold, though lenders often ask for one. The cards below show the details and the official sources.
Yes. A well construction permit from the county health department is required before drilling, the well must be built by a Maryland licensed well driller to COMAR 26.04.04 (grouted casing, 50 ft from a septic tank, 100 ft from a drainfield, minimum yields by use), and before the house can be occupied the county issues a certificate of potability based on a sample from an MDE-certified lab that passes for total coliform bacteria, nitrate and turbidity. Several counties add tests (Anne Arundel, Calvert and other Coastal Plain counties add arsenic and radium; Piedmont counties often add pH and radon screening). The driller files the well completion report with the county.
No statewide requirement. Maryland's residential disclosure asks about the water supply and known problems, and a few counties require a bacteria test or a yield test when a property on a well changes hands (check the county health department). FHA, VA and USDA loans normally require a bacteria, nitrate and lead sample from a certified lab before closing.
University of Maryland Extension and MDE recommend testing a private well every year for coliform bacteria and nitrate, and every three to five years for pH, hardness, iron, manganese, lead, copper and total dissolved solids. Add arsenic and radium in the Coastal Plain (the Aquia and Patuxent aquifers under Anne Arundel, Calvert, Prince George's and the Eastern Shore), radon and uranium in the Piedmont, PFAS near Patuxent River, Fort Meade and other airfields, chloride and sodium on the lower Eastern Shore, and test again after flooding, well work or a change in taste, color or smell.
No free program. The county health departments do not run labs but will tell you which certified labs serve the county, and several commercial labs on the MDE list (Water Testing Labs of MD, Home Land Labs, Fredericktowne Labs, Certified Water Testing, Chesapeake Environmental) are built around homeowner samples and run the potability panel for $60 to $150. University of Maryland Extension's Wells and Septic Systems program runs periodic free screening clinics.
2 certified labs within 40 miles serve Wicomico County, starting with Water Testing Labs of MD – Salisbury in Salisbury (in the county). Each card below shows whether the lab takes homeowner samples and which tests it is certified for.
2 certified labs within 40 miles
Homeowner samples
3 licensed contractors serve Wicomico County, including Crumps Well Drilling and Peninsula Water Conditioning Inc. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.
3 licensed contractors
License MSD100, JSD151 Active
License WCI111 Active
License WCI110 Active
Wells in Wicomico County typically reach 100 to 400 ft in the fractured crystalline rock of the Piedmont (Montgomery, Howard, Baltimore, Carroll and eastern Frederick counties), where yields are modest and a dry hole is possible; 50 to 300 ft in the sand aquifers of the Coastal Plain on the Eastern Shore, deeper (300 to 800 ft) in Southern Maryland where wells reach past the shallow arsenic and radium zones into the Magothy and Patapsco; 100 to 300 ft in the limestone and sandstone of the Hagerstown Valley and the western mountains. What comes up with the water depends on the aquifer, and across Maryland the usual suspects are coliform bacteria (statewide, worst in shallow and older wells), nitrate (eastern shore farm and poultry country, shallow columbia aquifer wells). A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Somerset County, Worcester County, Dorchester County, Caroline County.
Maryland state lab fees; a county health department may add a collection fee ($50 in Frederick County). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Maryland Department of Health lab fees, Frederick County Health Department, HomeGuide cost guides, Angi: cost to shock a well.
About 23,402, or 57% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.
Water Testing Labs of MD – Salisbury in Salisbury, inside the county. It accepts homeowner samples.
Yes. A well construction permit from the county health department is required before drilling, the well must be built by a Maryland licensed well driller to COMAR 26.04.04 (grouted casing, 50 ft from a septic tank, 100 ft from a drainfield, minimum yields by use), and before the house can be occupied the county issues a certificate of potability based on a sample from an MDE-certified lab that passes for total coliform bacteria, nitrate and turbidity. Several counties add tests (Anne Arundel, Calvert and other Coastal Plain counties add arsenic and radium; Piedmont counties often add pH and radon screening). The driller files the well completion report with the county.
Published lab fees in Maryland: $41 for a bacteria test and $18 for nitrate. Maryland state lab fees; a county health department may add a collection fee ($50 in Frederick County). Mail-in kits cost about the same as walking in.