Verified license

R & G Water Systems

Manchester, MD · Carroll CountyPump installation

Call (410) 239-0700
WebsiteDirections
License status
Active
checked September 30, 2026
License number
PI0186, PI0141, WCI178, WCI133
Maryland record
Services
3
Pump Installation and more

About R & G Water Systems

R & G Water Systems is a pump installation contractor based in Manchester, MD (Carroll County). The Maryland licensing program lists license PI0186, PI0141, WCI178, WCI133 as active, and we last checked the record on September 30, 2026.

The state record covers pump installation, pump repair and water treatment.

This profile is built from public state license records checked on September 30, 2026. Well Water Insider does not rate or endorse contractors. Own this business? Claim the profile to add photos, hours and a description.

License record

Verified against state records
License number
PI0186, PI0141, WCI178, WCI133
License type
Pump installation
Status
Active
Expires
June 1, 2027
Last verified
September 30, 2026

Check this license yourself on the official Maryland lookup.

What the state record says

Maryland licensees at this company on the State Board of Well Drillers roster: Jeffrey Hildebrand (PI0186, pump installer); Rickey L Roos (PI0141, pump installer); Jeffrey Hildebrand (WCI178, water conditioner installer); Rickey L Roos (WCI133, water conditioner installer). Licenses run through June 1, 2027. Maryland licenses the individual under Title 13 of the Environment Article and COMAR 26.05; a master well driller may construct, repair and abandon water wells (the water supply specialization is limited to water wells, the general one includes geothermal and other wells) and install pumps, a pump installer may install and repair pumps and pitless units, and a water conditioner installer may install treatment equipment. Wells themselves need a county health department permit under COMAR 26.04.04.

Services

What the Maryland record says R & G Water Systems is licensed or registered to do.

Pump Installation

Setting a new submersible or jet pump with the pressure tank, switch and controls.

Pump Repair

Tracking down low pressure, short cycling or no water, then repairing or replacing parts of the pump system.

Water Treatment

Sizing and installing softeners, iron filters, UV and reverse osmosis based on a lab test.

Service area

Based in Carroll County, Maryland.

Approximate location (Carroll County)

Well water in Carroll County

Useful context before you call a contractor here.

43%of households in Carroll County drink from a private well (est.)
Not statewidewater test when a home with a well is sold: no statewide rule in Maryland, but some local areas require one
Open the Carroll County well guide

Typical costs for these services

National ranges to help you read a quote. They are not prices from R & G Water Systems; ask for a written estimate.

Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed

National 2026 ranges. Sources, checked September 2026: HomeGuide cost guides, Angi.

Before you hire

  1. 1

    Confirm the license

    Look up license PI0186, PI0141, WCI178, WCI133 on the Maryland state lookup and make sure it is active for the work you need. Open the Maryland lookup.

  2. 2

    Get a written estimate

    Ask for the scope, parts, depth or pump size, permit fees and warranty in writing. Compare two or three quotes for big jobs.

  3. 3

    Ask about permits and the well log

    New wells and many repairs are reported to the state. Ask who files the paperwork and for a copy of the well log.

  4. 4

    Test the water after the work

    Any work on a well can disturb bacteria. Test for coliform bacteria once the job is done.

Questions about R & G Water Systems

Is R & G Water Systems licensed?

Yes. The Maryland record shows license PI0186, PI0141, WCI178, WCI133 (pump installation) with the status "active", last checked on September 30, 2026. You can confirm it on the state lookup.

What services does R & G Water Systems offer?

The state record lists pump installation, pump repair and water treatment. Call to confirm they take on your type of job.

What areas does R & G Water Systems serve?

The business is based in Carroll County (Manchester, MD).

How do I contact R & G Water Systems?

Call (410) 239-0700 and visit their website. The address on the state record is 1009 South Main St, Manchester, MD 21074.

Other licensed contractors near Manchester