Benton-Franklin Health District Lab
Homeowner samples
- Coliform Bacteria
- Hardness
- Nitrate / Nitrite
About 3,800 people in Morrow County, 34% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010, and state well records. Labs and contractors: state certification and license lists.
About 3,800 people in Morrow County, 34% of residents, rely on a private well, according to a 2010 U.S. Geological Survey estimate. That is well above the Oregon figure of 14%. State well records list 410 new domestic wells reported to OWRD since 2000, with a median depth of 150 feet. Nobody tests, treats or inspects that water unless the owner does.
Private wells in Morrow County follow Oregon's statewide rules, administered by the Oregon Water Resources Department, Well Construction and Compliance Section. No water test is required by the state when a new well is completed. A test is also required when a home with a well is sold. The cards below show the details and the official sources.
No statewide water test on a new well. The well must be built by an OWRD-licensed, bonded water supply well constructor (or by the landowner under a Landowner's Water Well Permit) to the OAR 690-210 standards, with a start card filed and the fee paid before drilling, a metal well ID tag attached, and a well report filed with OWRD within 30 days. Setbacks are 50 ft from a septic tank and 100 ft from a drainfield. Some counties ask for a bacteria test before a building permit is finaled, and some lenders do.
Yes. Oregon's Domestic Well Testing Act (ORS 448.271, OAR 333-061-0305 to 0335) requires the seller of a property with a domestic well to have the water tested by an ORELAP-accredited lab for arsenic, nitrate and total coliform bacteria, give the results to the buyer and report them to the Oregon Health Authority within 90 days of the sale. It is one of only a handful of state laws in the country that require a private well test at transfer.
The Oregon Health Authority recommends testing a domestic well every year for coliform bacteria and nitrate, and every three to five years for arsenic (found across the Willamette Valley, the Tualatin basin, Lane County and Klamath and Lake counties), plus pH, hardness, iron, manganese, lead and copper once. Add uranium and radon in Lane County and the Cascade foothills, and test again after flooding, well work or a change in taste, color or smell. In the Southern Willamette Valley and Lower Umatilla Basin Groundwater Management Areas, nitrate is the test that matters most.
No statewide free program. The OSU Extension Well Water Program runs free nitrate screening clinics around the state and publishes testing guidance, and Oregon Health Authority's Domestic Well Safety Program (971-673-0440) helps owners read results. The Lower Umatilla Basin (Morrow and Umatilla counties) has state-funded free nitrate testing and water delivery for affected wells. Otherwise OHA puts bacteria and nitrate tests at about $20 to $40 each and arsenic at $25 to $45.
For a homeowner test, start with Benton-Franklin Health District Lab in Kennewick (about 39 miles from the county's population center), the closest certified lab that accepts private well samples. The cards below list every certified lab within 40 miles and which tests each is certified for.
1 certified labs within 40 miles of this county
Homeowner samples
9 licensed contractors list Morrow County as a home base or service area, including Cascade Well Drilling LLC and Courtney Well Drilling, LLC. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.
9 licensed contractors
License 1934 Active
License 1963, 1985, 2061, 2103, 2146, 1735 Active
License 2043, 2048 Active
License 10454 Active
License 1367, 1927, 2077, 2135, 2136, 1578, 1772, 1988 Active
License 1916, 1766 Active
License 2060 Active
License 2016, 10576 Active
License 1881 Active
In state well records, the median household well in Morrow County is 150 feet deep, and the middle half run 100 to 280 feet (410 new domestic wells reported to OWRD since 2000). Contaminants worth testing for in this part of Oregon include arsenic, nitrate, coliform bacteria, and iron and manganese. A first full panel tells you which of them apply to your well.
New domestic wells reported to OWRD since 2000. "Most wells" is the middle half.
Neighboring counties: Umatilla County, Gilliam County, Sherman County, Wheeler County.
Lab fees: Oregon Health Authority estimates; arsenic runs $25 to $45. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Oregon Health Authority testing recommendations, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 3,800 people, 34% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data. State well records add a second view: 410 new domestic wells reported to OWRD since 2000.
Benton-Franklin Health District Lab in Kennewick, about 39 miles from the county's population center. It says it accepts samples from homeowners.
No statewide water test on a new well. The well must be built by an OWRD-licensed, bonded water supply well constructor (or by the landowner under a Landowner's Water Well Permit) to the OAR 690-210 standards, with a start card filed and the fee paid before drilling, a metal well ID tag attached, and a well report filed with OWRD within 30 days. Setbacks are 50 ft from a septic tank and 100 ft from a drainfield. Some counties ask for a bacteria test before a building permit is finaled, and some lenders do.
Published lab fees in Oregon: $20 to $40 for a bacteria test and $20 to $40 for nitrate (Oregon Health Authority testing recommendations). Mail-in kits cost about the same as walking in.