Comac Pump & Well LLC is a well drilling and pump installation contractor based in Kingston, NH (Rockingham County). The New Hampshire licensing program lists license 253 as active, and we last checked the record on September 30, 2026.
The state record covers pump installation, pump repair, well abandonment, well drilling and well repair. It lists 2 counties where the business works, including York County and Cumberland County. The business also holds a license in Maine.
This profile is built from public state license records checked on September 30, 2026. Well Water Insider does not rate or endorse contractors. Own this business? Claim the profile to add photos, hours and a description.
Maine: license WDC0060, WD00220, well drilling and pump installation, expires December 31, 2026 (state lookup)
What the state record says
License details
New Hampshire licensed water well contractor and pump installer
Water Well Board license 253: water well contractor license for rotary drilling
Pump installer license (domestic and commercial/industrial)
Active on the NHDES Find a Contractor search on September 30, 2026
The Water Well Board (RSA 482-B and rules We 100 to We 1000) licenses the business for the well construction methods it may use; a water well contractor may construct, alter, hydrofracture and abandon wells of the licensed types, and a pump installer may install and service pumps and pressure systems.
Wells need no state permit, but every completed well is reported to NHDES within 90 days and appears in the state Water Well Inventory.
Maine record
Track record
Filed 191 well reports with the Maine Geological Survey well database since 2016, most recently in April 2026, mostly in York and Cumberland counties; the median depth of those wells is 400 feet and the median yield 15 gallons per minute.
License details
Maine licensed well drilling company (Maine Water Well Commission company license WDC0060, expires December 31, 2026).
Licensed individuals at the company: Scott M Costa (WD00220: master well driller, master pump installer, open loop geothermal, closed loop geothermal).
Maine licenses both the company and the individual under 32 MRS chapter 69-C and the Commission's rules (10-144 CMR chapter 232); a master well driller may drill, deepen, hydrofracture and abandon wells, a master pump installer may install and service pumps and pressure systems, journeymen work under a master, and geothermal grades cover open and closed loop systems.
Maine requires no state permit for a household well.
Services
What the New Hampshire record says Comac Pump & Well LLC is licensed or registered to do.
Pump Installation
Setting a new submersible or jet pump with the pressure tank, switch and controls.
Pump Repair
Tracking down low pressure, short cycling or no water, then repairing or replacing parts of the pump system.
Well Abandonment
Sealing an unused well to state standards so it cannot carry surface water down into the aquifer.
Well Drilling
Drilling a new private well, setting the casing and grouting it the way state rules require.
Well Repair
Fixing casings, caps, pitless adapters and other parts of an existing well.
Want to compare more than one quote?
Send one free request and hear back from up to 3 licensed well contractors near Kingston.
Service area
Based in Rockingham County, New Hampshire. The state record lists 2 counties.
Approximate location (Rockingham County)
York County
Cumberland County
Well water in Rockingham County
Useful context before you call a contractor here.
People on wells31%of residents in Rockingham County, about 91,500 people (USGS estimate, 2010)
Typical depth240 to 480 feet; the median of 5,130 new domestic wells in the NHDES Water Well Inventory completed since 2000 is 320 feet
Test at home saleNot requiredNo statewide rule in New Hampshire.
Look up license 253 on the New Hampshire state lookup and make sure it is active for the work you need. Open the New Hampshire lookup.
2
Get a written estimate
Ask for the scope, parts, depth or pump size, permit fees and warranty in writing. Compare two or three quotes for big jobs.
3
Ask about permits and the well log
New wells and many repairs are reported to the state. Ask who files the paperwork and for a copy of the well log.
4
Test the water after the work
Any work on a well can disturb bacteria. Test for coliform bacteria once the job is done.
Questions about Comac Pump & Well LLC
Is Comac Pump & Well LLC licensed?
Yes. The New Hampshire record shows license 253 (well drilling and pump installation) with the status "active", last checked on September 30, 2026. You can confirm it on the state lookup.
What services does Comac Pump & Well LLC offer?
The state record lists pump installation, pump repair, well abandonment, well drilling and well repair. Call to confirm they take on your type of job.
What areas does Comac Pump & Well LLC serve?
The business is based in Rockingham County (Kingston, NH). The state record lists 2 counties, including York County and Cumberland County.
How do I contact Comac Pump & Well LLC?
Call (603) 642-3683, visit their website and email them. The address on the state record is PO BOX 425, Kingston, NH 03848.