Verified license

Cushing & Sons Inc

Walpole, NH · Cheshire CountyWell drilling and pump installation · licensed in Maine

Call (603) 352-8866
License status
Active
checked September 30, 2026
License number
WDC0179, WD00161
Maine record
Services
6
Geothermal and more

About Cushing & Sons Inc

Cushing & Sons Inc is a well drilling and pump installation contractor based in Walpole, NH (Cheshire County). The Maine licensing program lists license WDC0179, WD00161 as active, and we last checked the record on September 30, 2026.

The state record covers geothermal, pump installation, pump repair, well abandonment, well drilling and well repair.

This profile is built from public state license records checked on September 30, 2026. Well Water Insider does not rate or endorse contractors. Own this business? Claim the profile to add photos, hours and a description.

License record

Verified against state records
License number
WDC0179, WD00161
License type
Well drilling and pump installation
Status
Active
Expires
December 31, 2026
Last verified
September 30, 2026

Check this license yourself on the official Maine lookup.

What the state record says

License details

  • Maine licensed well drilling company (Maine Water Well Commission company license WDC0179, expires December 31, 2026).
  • Licensed individuals at the company: Bart C Cushing (WD00161: master well driller, master pump installer, open loop geothermal).
  • Maine licenses both the company and the individual under 32 MRS chapter 69-C and the Commission's rules (10-144 CMR chapter 232); a master well driller may drill, deepen, hydrofracture and abandon wells, a master pump installer may install and service pumps and pressure systems, journeymen work under a master, and geothermal grades cover open and closed loop systems.
  • Maine requires no state permit for a household well.

Services

What the Maine record says Cushing & Sons Inc is licensed or registered to do.

Geothermal

Drilling closed-loop boreholes for ground-source heat pumps.

Pump Installation

Setting a new submersible or jet pump with the pressure tank, switch and controls.

Pump Repair

Tracking down low pressure, short cycling or no water, then repairing or replacing parts of the pump system.

Well Abandonment

Sealing an unused well to state standards so it cannot carry surface water down into the aquifer.

Well Drilling

Drilling a new private well, setting the casing and grouting it the way state rules require.

Well Repair

Fixing casings, caps, pitless adapters and other parts of an existing well.

Want to compare more than one quote?

Send one free request and hear back from up to 3 licensed well contractors near Walpole.

Service area

Based in Cheshire County, New Hampshire.

Approximate location (Cheshire County)

Well water in Cheshire County

Useful context before you call a contractor here.

People on wells40%of residents in Cheshire County, about 31,200 people (USGS estimate, 2010)
Typical depth220 to 420 feet; the median of 1,268 new domestic wells in the NHDES Water Well Inventory completed since 2000 is 320 feet
Test at home saleNot requiredNo statewide rule in New Hampshire.
Open the Cheshire County well guide

Typical costs for these services

National ranges to help you read a quote. They are not prices from Cushing & Sons Inc; ask for a written estimate.

Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself
National 2026 ranges. Sources, checked September 2026: HomeGuide cost guides and Angi.

Certified labs nearby

Test your water before and after any work on the well.

All labs near here

Before you hire

  1. 1

    Confirm the license

    Look up license WDC0179, WD00161 on the Maine state lookup and make sure it is active for the work you need. Open the Maine lookup.

  2. 2

    Get a written estimate

    Ask for the scope, parts, depth or pump size, permit fees and warranty in writing. Compare two or three quotes for big jobs.

  3. 3

    Ask about permits and the well log

    New wells and many repairs are reported to the state. Ask who files the paperwork and for a copy of the well log.

  4. 4

    Test the water after the work

    Any work on a well can disturb bacteria. Test for coliform bacteria once the job is done.

Questions about Cushing & Sons Inc

Is Cushing & Sons Inc licensed?

Yes. The Maine record shows license WDC0179, WD00161 (well drilling and pump installation) with the status "active", last checked on September 30, 2026. You can confirm it on the state lookup.

What services does Cushing & Sons Inc offer?

The state record lists geothermal, pump installation, pump repair, well abandonment, well drilling and well repair. Call to confirm they take on your type of job.

What areas does Cushing & Sons Inc serve?

The business is based in Cheshire County (Walpole, NH).

How do I contact Cushing & Sons Inc?

Call (603) 352-8866 and visit their website. The address on the state record is PO BOX 668, Walpole, NH 03608.

Other licensed contractors near Walpole

Free quotes

Get quotes from licensed local pros

Your request goes to Well Water Insider’s network of licensed well contractors near you, not to Cushing & Sons Inc. To contact Cushing & Sons Inc directly, call (603) 352-8866.

Free, with no obligation. See our Privacy Policy and Terms.