New Hampshire DHHS Public Health Laboratories
Homeowner samples
- Arsenic
- Coliform Bacteria
- Full Homeowner Panel
- Hardness
- Iron and Manganese
- Lead
- Nitrate / Nitrite
- Radon in Water
- Uranium
About 51,500 people in Merrimack County, 35% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010, and state well records. Labs and contractors: state certification and license lists.
The U.S. Geological Survey's 2010 estimate puts the number of Merrimack County residents on private wells at about 51,500, or 35%, close to the New Hampshire figure of 30%. State well records list 3,348 new domestic wells in the NHDES Water Well Inventory completed since 2000, with a median depth of 360 feet. Nobody tests, treats or inspects that water unless the owner does.
The rules that apply in Merrimack County are set at the state level in New Hampshire. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.
No statewide water test and no state permit for a household well. The well must be constructed by a New Hampshire licensed water well contractor to the Water Well Board's rules (casing, grout and cap, and the setbacks in the subdivision and septic rules), and the contractor files a well completion report with NHDES within 90 days, which puts the well in the state Water Well Inventory. Most towns require a bacteria test, and some a full Standard Analysis, before a certificate of occupancy; NHDES recommends the Standard Analysis on every new well before it is used.
No statewide requirement. RSA 477:4-c requires the seller to disclose the well's location, type, malfunctions and the date and results of the most recent water test, so buyers routinely test as a contingency, and some lenders require a water test before closing. Radon and arsenic are the results that most often hold up a New Hampshire closing.
NHDES recommends the Standard Analysis every three to five years and bacteria and nitrate every year, plus a test after any well or plumbing work, flooding or a change in taste, color or smell. The Standard Analysis from the state lab covers bacteria, nitrate, nitrite, arsenic, uranium, fluoride, chloride, copper, iron, lead, manganese, sodium, hardness, pH and radon. New Hampshire uses its own arsenic standard of 5 ppb, half the federal limit, and NHDES also suggests a one-time PFAS test for wells in the southern tier and near known contamination.
No statewide free program. The NH Public Health Laboratories in Concord sell the Standard Analysis kit for a modest fee (the radon vial is a separate sample), picked up at the lab or mailed, and NHDES interprets the results through its Be Well Informed web tool. Towns and regional planning commissions periodically run subsidized arsenic and radon screening, and the state has paid for PFAS sampling of wells near known sources.
The nearest certified lab that takes samples from homeowners is New Hampshire DHHS Public Health Laboratories in Concord, about 4 miles from the county's population center. 7 certified labs are within 40 miles in all. 5 of them say they take samples from homeowners.
7 certified labs within 40 miles of this county
Homeowner samples
Homeowner samples
Homeowner samples
Homeowner samples
Homeowner samples
Licensed help in Merrimack County includes Barton Brothers LLC and C C Thomas & Sons LLC and 15 others. Every listing was matched to the New Hampshire license list; the "verify" link on each profile opens the state lookup.
17 licensed contractors
License 3471 Active
License 544 Active
License 429 Active
License 1 Active
License 1887 Active
License 2729 Active
License 235 Active
License 1877 Active
License 1400 Active
License 1840 Active
License 1416 Active
License 1911 Active
In state well records, the median household well in Merrimack County is 360 feet deep, and the middle half run 240 to 480 feet (3,348 new domestic wells in the NHDES Water Well Inventory completed since 2000). Contaminants worth testing for in this part of New Hampshire include arsenic, radon in water, uranium, and manganese and iron. A first full panel tells you which of them apply to your well.
New domestic wells in the NHDES Water Well Inventory completed since 2000. "Most wells" is the middle half.
Neighboring counties: Belknap County, Hillsborough County, Rockingham County, Strafford County.
Lab fees: New Hampshire state lab: $15 bacteria, $85 standard analysis, $90 home buyer test. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: NH Water Analysis Laboratory testing guide, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 51,500 people, 35% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data. State well records add a second view: 3,348 new domestic wells in the NHDES Water Well Inventory completed since 2000.
New Hampshire DHHS Public Health Laboratories in Concord, about 4 miles from the county's population center. It says it accepts samples from homeowners.
No statewide water test and no state permit for a household well. The well must be constructed by a New Hampshire licensed water well contractor to the Water Well Board's rules (casing, grout and cap, and the setbacks in the subdivision and septic rules), and the contractor files a well completion report with NHDES within 90 days, which puts the well in the state Water Well Inventory. Most towns require a bacteria test, and some a full Standard Analysis, before a certificate of occupancy; NHDES recommends the Standard Analysis on every new well before it is used.
Published lab fees in New Hampshire: $15 for a bacteria test (NH Water Analysis Laboratory testing guide). Mail-in kits cost about the same as walking in.