Illinois county well guide

Well Water in Franklin County, IL: Testing, Contractors and Rules

About 665 households in Franklin County, 4% of the county, rely on a private well. Nobody tests that water unless the owner does.

Labs within 40 milesLicensed contractors
4%of households on a private well
Share on wells, county vs state
Franklin County4%
Illinois average9%
2licensed contractors serve the county
24 mito the nearest certified lab, ARDL Inc
Nostatewide test required when a home is sold

Wells are the exception in Franklin County: about 665 households, under 4% of the county, are on a private well. Being in the minority means less local help, so this page gathers what applies.

Local rules for wells in Franklin County

The rules that apply in Franklin County are set at the state level in Illinois. New wells must be tested before use, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.

At a glance

Water test for a new wellRequired

A permit from the county health department (or IDPH where the county has no delegated program) is required before a private well is drilled, the well must be built by an IDPH licensed water well contractor to the Illinois Water Well Construction Code (steel or approved plastic casing, grout, the setbacks from septic systems and other sources, a sanitary well cap above grade), and the contractor files a well construction report with IDPH. Under the code the new well is disinfected and a bacteria sample is collected, in most counties by the health department at the final inspection, before the well is approved for use; the health department's sign-off is what the building department wants before occupancy.

Water test when a home is soldNot required statewide

No statewide requirement. The Illinois Residential Real Property Disclosure Report asks the seller about the water supply and any known defects, and FHA, VA and USDA loans require a bacteria, nitrate and lead sample from a certified lab before closing. A few counties run point-of-sale well and septic inspection programs under local ordinance, so ask the county health department.

What the state recommends

IDPH recommends testing a private well every year for coliform bacteria and nitrate, after any repair or flooding, and whenever the taste, color or smell changes; a chemistry panel (arsenic, iron, manganese, hardness, chloride, sulfate) when the well is new or every few years; and, depending on the aquifer, radium and barium for deep sandstone wells in northern Illinois, arsenic for wells in the Mahomet and other glacial aquifers of central Illinois, and pesticides and nitrate for shallow wells in farm country. County health department labs run the bacteria test cheaply, and the IDPH state lab tests samples submitted through the county.

Free or low-cost testingAvailable

No statewide free program. Most county health departments sell a bacteria (and often nitrate) sample kit for a small fee and explain the result, and the IDPH Division of Laboratories runs the bacteria test for counties without their own lab. The Illinois State Water Survey and university extension programs run periodic free nitrate and arsenic screening clinics in farm counties.

Getting your water tested near Franklin County

The nearest certified lab is ARDL Inc in Mount Vernon, about 24 miles from the county center. There is one more within 40 miles, listed below with what it tests for.

2 certified labs within 40 miles

Licensed well contractors serving Franklin County

Licensed help in Franklin County includes Durbin Enterprises / D & R DRLG and Joseph F Foppe. Every listing was matched to the Illinois license list; the "verify" link on each profile opens the state lookup.

Well depth and water chemistry

Well depth and water chemistry in Franklin County follow the rock underneath it. Typical wells here run 30 to 250 ft, varying with the geology more than in most states: shallow sand and gravel wells of 30 to 120 ft in the river valleys and central Illinois (Sangamon and Madison county medians are under 60 ft), 90 to 250 ft in the glacial drift of the Chicago collar counties (McHenry 70 to 200 ft, Lake 90 to 230 ft), and 200 to 660 ft for the dolomite and sandstone bedrock wells of Kane, Cook, Will, Jo Daviess and the northern tier; southern Illinois bedrock wells are 150 to 350 ft and low-yielding. Contaminants worth testing for in this part of Illinois include arsenic (naturally occurring in the glacial sand and gravel aquifers of central and northeastern illinois, including the mahomet aquifer, where roughly one well in ten is over the standard), iron and manganese (nearly universal in glacial aquifers).

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Arsenic (naturally occurring in the glacial sand and gravel aquifers of central and northeastern Illinois
  • Including the Mahomet aquifer
  • Where roughly one well in ten is over the standard)
  • Iron and manganese (nearly universal in glacial aquifers)
  • Hardness (very hard water statewide)
  • Radium and barium (the deep Cambrian-Ordovician sandstone aquifer of northern Illinois)
  • Coliform bacteria (old large-diameter bored and dug wells
  • Common in southern Illinois)
  • Nitrate and atrazine (shallow wells in corn and soybean country)
  • Chloride and sodium (road salt in the Chicago collar counties
  • And natural brine in deep wells)
  • Hydrogen sulfide and methane (deep wells in the south and the coal counties)
  • Fluoride (locally high in deep aquifers)

Neighboring counties: Williamson County, Perry County, Jackson County, Hamilton County.

What well work costs in Franklin County

Basic bacteria and nitrate test$25 to $75lab fee, homeowner sample
Full panel lab test$150 to $400metals, VOCs, radiologicals
Well inspection$250 to $550flow, pressure, visual, water test
Submersible pump replacement$1,200 to $4,500parts and labor
Pressure tank replacement$400 to $1,200installed
Whole-house treatment system$800 to $6,000softener, iron filter, UV, RO
New well drilled$5,500 to $25,000about $25 to $65 per foot
Shock chlorination$80 to $300or about $20 as a DIY job

National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.

Questions Franklin County well owners ask

How many homes in Franklin County are on a well?

About 665, or 4% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.

Where is the closest certified lab to Franklin County?

ARDL Inc in Mount Vernon, about 24 miles away. Call first to ask whether they accept homeowner samples.

Do I need a permit to drill a well in Franklin County?

A permit from the county health department (or IDPH where the county has no delegated program) is required before a private well is drilled, the well must be built by an IDPH licensed water well contractor to the Illinois Water Well Construction Code (steel or approved plastic casing, grout, the setbacks from septic systems and other sources, a sanitary well cap above grade), and the contractor files a well construction report with IDPH. Under the code the new well is disinfected and a bacteria sample is collected, in most counties by the health department at the final inspection, before the well is approved for use; the health department's sign-off is what the building department wants before occupancy.

What does a well test cost near Franklin County?

A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. Mail-in kits cost about the same as walking in.