Teklab (Bluff Road)
- Arsenic
- Full Homeowner Panel
- Hardness
- Iron and Manganese
- Lead
- Nitrate / Nitrite
About 105 households in Macoupin County, 1% of the county, rely on a private well. Nobody tests that water unless the owner does.
Most of Macoupin County is on public water, but an estimated 105 households still rely on a private well. This page covers the rules, labs and licensed contractors that serve them.
Private wells in Macoupin County follow Illinois's statewide rules, administered by Illinois Department of Public Health, Private Water Program. A water test is required when a new well is completed. There is no statewide test requirement when a home is sold, though lenders often ask for one. The cards below show the details and the official sources.
A permit from the county health department (or IDPH where the county has no delegated program) is required before a private well is drilled, the well must be built by an IDPH licensed water well contractor to the Illinois Water Well Construction Code (steel or approved plastic casing, grout, the setbacks from septic systems and other sources, a sanitary well cap above grade), and the contractor files a well construction report with IDPH. Under the code the new well is disinfected and a bacteria sample is collected, in most counties by the health department at the final inspection, before the well is approved for use; the health department's sign-off is what the building department wants before occupancy.
No statewide requirement. The Illinois Residential Real Property Disclosure Report asks the seller about the water supply and any known defects, and FHA, VA and USDA loans require a bacteria, nitrate and lead sample from a certified lab before closing. A few counties run point-of-sale well and septic inspection programs under local ordinance, so ask the county health department.
IDPH recommends testing a private well every year for coliform bacteria and nitrate, after any repair or flooding, and whenever the taste, color or smell changes; a chemistry panel (arsenic, iron, manganese, hardness, chloride, sulfate) when the well is new or every few years; and, depending on the aquifer, radium and barium for deep sandstone wells in northern Illinois, arsenic for wells in the Mahomet and other glacial aquifers of central Illinois, and pesticides and nitrate for shallow wells in farm country. County health department labs run the bacteria test cheaply, and the IDPH state lab tests samples submitted through the county.
No statewide free program. Most county health departments sell a bacteria (and often nitrate) sample kit for a small fee and explain the result, and the IDPH Division of Laboratories runs the bacteria test for counties without their own lab. The Illinois State Water Survey and university extension programs run periodic free nitrate and arsenic screening clinics in farm counties.
3 certified labs within 40 miles serve Macoupin County, starting with Teklab (Bluff Road) in Collinsville (about 34 miles from the county center). Each card below shows whether the lab takes homeowner samples and which tests it is certified for.
2 certified labs within 40 miles
Homeowner samples
2 licensed contractors serve Macoupin County, including Geotechnical Construction Inc and Geotechnicalconstruction, Inc. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.
2 licensed contractors
License 003885 Active
License 102-004413, 092-009471 Active
Wells in Macoupin County typically reach 40 to 50 feet; the median of 190 private water wells on the ISGS ILWATER map drilled since 2000 is 40 feet. What comes up with the water depends on the aquifer, and across Illinois the usual suspects are arsenic (naturally occurring in the glacial sand and gravel aquifers of central and northeastern illinois, including the mahomet aquifer, where roughly one well in ten is over the standard), iron and manganese (nearly universal in glacial aquifers). A first full panel tells you which of them apply to your well.
40 to 50 feet; the median of 190 private water wells on the ISGS ILWATER map drilled since 2000 is 40 feet
Neighboring counties: Montgomery County, Jersey County, Madison County, Greene County.
County health department lab: one $30 test covers coliform, E. coli and nitrate (McHenry County). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: McHenry County Health Department lab, HomeGuide cost guides, Angi: cost to shock a well.
About 105, or 1% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.
Teklab (Bluff Road) in Collinsville, about 34 miles away. Call first to ask whether they accept homeowner samples.
A permit from the county health department (or IDPH where the county has no delegated program) is required before a private well is drilled, the well must be built by an IDPH licensed water well contractor to the Illinois Water Well Construction Code (steel or approved plastic casing, grout, the setbacks from septic systems and other sources, a sanitary well cap above grade), and the contractor files a well construction report with IDPH. Under the code the new well is disinfected and a bacteria sample is collected, in most counties by the health department at the final inspection, before the well is approved for use; the health department's sign-off is what the building department wants before occupancy.
Published lab fees in Illinois: $30 for a bacteria test that also covers nitrate. County health department lab: one $30 test covers coliform, E. coli and nitrate (McHenry County). Mail-in kits cost about the same as walking in.