Radiation Safety Engineering, Inc.
- Certification
- State certified list checked October 8, 2026
- Certificate
- AZ0462 Arizona program
- Tests listed
- 2 Radon in Water and more
- Homeowner samples
- Call to ask not listed on the record
About Radiation Safety Engineering, Inc.
Radiation Safety Engineering, Inc. is a commercial laboratory in Chandler, AZ (Maricopa County). It is on the Arizona drinking water program's list of certified laboratories (certificate AZ0462), and we last checked the list on October 8, 2026.
The record does not say whether it takes samples from homeowners. Some certified labs only work with public water systems, so call before you collect a sample.
Before you go: Radiation Safety Engineering tests drinking water and environmental samples for radionuclides, according to University of Arizona Cooperative Extension, Laboratories Conducting Soil, Plant, Feed or Water Testing (AZ1111, revised April 2025). That makes it a lab to know for uranium and gross alpha results. Call to ask whether it takes homeowner samples.
This profile is built from the official state list of certified drinking water laboratories, checked on October 8, 2026. Well Water Insider does not rate or endorse labs. Run this lab? Claim the profile to add prices, turnaround times, hours and a description.
Certification and services
State certified- Certification number
- AZ0462
- Certified by
- Arizona drinking water program
- Certified for
- Drinking water
- Lab type
- Commercial
- Last verified
- October 8, 2026
Listed on the official state certified laboratory list.
How to test your water here
How this lab takes samples, based on its listing. Call to confirm hours, bottles and prices.
Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Prices at this lab may differ.
- 1
Call for the right bottles
Bacteria samples need a sterile bottle from the lab. Chemistry samples usually take a clean container the lab supplies.
- 2
Collect from a cold tap before treatment
Skip softeners and filters. Remove the aerator, run the water 3 to 5 minutes, then fill without touching the inside of the cap.
- 3
Keep it cold and deliver within 24 hours
Bacteria samples are time-sensitive. Use a cooler with ice packs and hand it in or ship it the same day.
- 4
Read the report against the standards
Compare results with EPA drinking water limits. If anything is over, our problem pages explain what it means and how to treat it.
Tests this lab is listed for
From the state certification list and the lab's own listing. Ask which ones it runs for homeowners.
Radon in Water
A gas from granite areas that escapes into the air when you use water. Learn more
Uranium
Natural in granite and some other rock. The EPA limit is 0.030 mg/L. Learn more
Location
3245 N. Washington St., Chandler, AZ 85225
Lab address
Questions about Radiation Safety Engineering, Inc.
Is Radiation Safety Engineering, Inc. state certified?
Yes. It is on the Arizona list of laboratories certified for drinking water testing, last checked October 8, 2026.
What can Radiation Safety Engineering, Inc. test well water for?
Its listing covers radon in water and uranium. Call to confirm prices and which tests it runs for private well owners.
Can I bring my own well water sample?
The listing does not say. Some certified labs only test for public water systems, so call before collecting a sample.
How do I contact Radiation Safety Engineering, Inc.?
Call (480) 897-9459 and visit the lab's website. The address is 3245 N. Washington St., Chandler, AZ 85225.
Other certified labs nearby
Aquatic Consulting & Testing, Inc.
Homeowner samples
- Coliform Bacteria

