State-certified lab

A & B Labs Arizona Inc.

Tempe, AZ · Maricopa CountyCommercial laboratory

Certification
State certified
list checked October 8, 2026
Certificate
AZ0768
Arizona program
Homeowner samples
Call to ask
not listed on the record

About A & B Labs Arizona Inc.

A & B Labs Arizona Inc. is a commercial laboratory in Tempe, AZ (Maricopa County). It is on the Arizona drinking water program's list of certified laboratories (certificate AZ0768), and we last checked the list on October 8, 2026.

The record does not say whether it takes samples from homeowners. Some certified labs only work with public water systems, so call before you collect a sample.

Before you go: Listed as Apex Environmental Laboratory (metals and elemental analysis) in University of Arizona Cooperative Extension, Laboratories Conducting Soil, Plant, Feed or Water Testing (AZ1111, revised April 2025), which describes it as not set up for the average homeowner.

This profile is built from the official state list of certified drinking water laboratories, checked on October 8, 2026. Well Water Insider does not rate or endorse labs. Run this lab? Claim the profile to add prices, turnaround times, hours and a description.

Certification and services

State certified
Certification number
AZ0768
Certified by
Arizona drinking water program
Certified for
Drinking water
Lab type
Commercial
Last verified
October 8, 2026

Listed on the official state certified laboratory list.

How to test your water here

How this lab takes samples, based on its listing. Call to confirm hours, bottles and prices.

Homeowner samplesNot listed, call to confirm
Mail-in kitsNot listed, call to confirm
Walk-in drop offNot listed, call to confirm

Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Prices at this lab may differ.

  1. 1

    Call for the right bottles

    Bacteria samples need a sterile bottle from the lab. Chemistry samples usually take a clean container the lab supplies.

  2. 2

    Collect from a cold tap before treatment

    Skip softeners and filters. Remove the aerator, run the water 3 to 5 minutes, then fill without touching the inside of the cap.

  3. 3

    Keep it cold and deliver within 24 hours

    Bacteria samples are time-sensitive. Use a cooler with ice packs and hand it in or ship it the same day.

  4. 4

    Read the report against the standards

    Compare results with EPA drinking water limits. If anything is over, our problem pages explain what it means and how to treat it.

Location

2105 S. 48th Street, Ste 102, Tempe, AZ 85282

Lab address

Questions about A & B Labs Arizona Inc.

Is A & B Labs Arizona Inc. state certified?

Yes. It is on the Arizona list of laboratories certified for drinking water testing, last checked October 8, 2026.

Can I bring my own well water sample?

The listing does not say. Some certified labs only test for public water systems, so call before collecting a sample.

How do I contact A & B Labs Arizona Inc.?

Call (602) 437-0762 and visit the lab's website. The address is 2105 S. 48th Street, Ste 102, Tempe, AZ 85282.

Other certified labs nearby